For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
1
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
v03.0712
HMC697LP4 / 697LP4E
General Description
Features
Functional Diagram
Typical Applications
Electrical Specications, See Test Conditions on following page herein.
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Ty p. Max. Units
Frequency Range, RF 450 - 960 1700 - 2200 2200 - 2700 3400 - 4000 MHz
Output P1dB +8 +8 +8 +7 dBm
Output Noise Floor -167 -165 -165 -165 dBm/Hz
Output IP3 +23 +22 +22 +20 dBm
Output Power 2 4 1.5 3.5 1 3 0 2 dBm
Carrier Feedthrough (uncalibrated) -38 -38 -40 -33 dBm
Sideband Suppression
(uncalibrated) 43 42 43 45 dBc
LO Port Return Loss 12 15 14 8dB
RF Port Return Loss 25 17 15 16 dB
The HMC697LP4(E) is a low noise, high linearity Direct
Quadrature Modulator RFIC which is ideal for digital
modulation applications from 0.2 to 4.0 GHz including;
Cellular/3G, WiMAX/4G, Broadband Wireless Access
& ISM circuits. Housed in a compact 4x4 mm (LP4)
SMT QFN package, the RFIC requires minimal external
components & provides a low cost alternative to more
complicated double upconversion architectures. The
RF output port is single-ended and matched to 50
Ohms with no external components. The LO requires
-6 to +6 dBm and can be driven in either differential or
single-ended mode. This device is optimized for a +5V
supply, and offers improved carrier feedthrough and
sideband suppression characteristics.
Very Low Noise Floor, -165 dBm/Hz
Excellent Carrier & Sideband Suppression
Very High Linearity, +22 dBm OIP3
High Output Power, +9 dBm Output P1dB
High Modulation Accuracy
24 Lead 4x4 mm QFN Package: 16 mm2
The HMC697LP4(E) is Ideal for:
• UMTS, GSM or CDMA Basestations
• Fixed Wireless or WLL
• ISM Transceivers, 900 & 2400 MHz
• GMSK, QPSK, QAM, SSB Modulators
• Cellular/3G and WiMAX/4G
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
2
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Electrical Specications, (continued)
Parameter Conditions Min. Typ. Max. Units
RF Output
RF Frequency Range 200 4000 MHz
RF Return Loss 15 dB
LO Input
LO Frequency Range 200 4000 MHz
LO Input Power -6 0+6 dBm
LO Port Return Loss 12 dB
Baseband Input Port
Baseband Input DC Voltage (Vbbdc) +1.4 +1.5 +1.6 V
Baseband Input DC Bias Current (Ibbdc) Single-ended. 90 µA
Single-ended Baseband Input Capacitance De-embed to the lead of the device. 4.5 pF
DC Power Requirements See Test Conditions Below
Supply Voltage (Vcc1, Vcc2) +4.5 +5.0 +5.5 V
Supply Current (Icc1 + Icc2) 168 mA
Parameter Condition
Temperature +25 °C
Baseband Input Frequency 200 kHz
Baseband Input DC Voltage (Vbbdc) +1. 5V
Baseband Input AC Voltage (Peak to Peak Differential, I and Q) 1.6V
Baseband Input AC Voltage for OIP3 Measurement (Peak to Peak Differential, I and Q) 800 mV per tone @ 150 & 250 kHz
Frequency Offset for Output Noise Measurements 20 MHz
Supply (Vcc1, Vcc2) +5.0V
LO Input Power 0 dBm
LO Input Mode Single-Ended through LOP
Mounting Conguration Refer to HMC697LP4(E) Application Schematic Herein
Sideband & Carrier Feedthrough Uncalibrated
Test Conditions: Unless Otherwise Specied, the Following Test Conditions Were Used
Calibrated vs. Uncalibrated Test Results
During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from
the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal. The “Uncalibrated, +25 °C” Sideband
and Carrier Suppression plots were measured at room temperature, while the “Uncalibrated, over Temperature”
Sideband and Carrier Suppression plots represent the worst case uncalibrated suppression levels measured at T=
-40 °C, +25 °C, and +85 °C.
The “Calibrated, +25 °C” Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude
balance and I/Q phase offset (skew) at +25 °C, and at each LO input power level. The +25 °C adjustment settings
were held constant during tests over temperature. The “Calibrated, over Temperature” plots represent the worst case
calibrated Sideband Suppression levels at T= -40 °C, +25 °C, and +85 °C.
The “Calibrated, +25 °C” Carrier Suppression data was plotted after a manual adjustment of the Ip/In & Qp/Qn DC
offsets at +25 °C, and at each LO input power level. The +25 °C adjustment settings were held constant during tests
over temperature. The “Calibrated, over Temperature” plots represent the worst case Carrier Suppression levels
measured at T= -40 °C, +25 °C, and +85 °C.
Interfacing the HMC697LP4(E) with D/A Converters
The HMC697LP4(E) wideband I/Q modulator is suitable to interface with high-speed D/A converters (DAC) to transmit
complex modulation schemes. Please refer to the Product Application Note titled “Interfacing the HMC697LP4(E) with
D/A Converters” for further information.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
3
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Wideband Performance vs. Frequency
Output IP3, P1dB & Noise Floor
@ 20 MHz Offset vs. Frequency
Return Loss vs. FrequencySideband Suppression vs. Frequency
Uncalibrated Carrier Feedthrough [1]
vs. Frequency Over Temperature
Calibrated Carrier Feedthrough [1]
vs. Frequency Over Temperature
-70
-60
-50
-40
-30
-20
-10
0
0 500 1000 1500 2000 2500 3000 3500 4000
+25C
+85C
-40C
SIDEBAND SUPPRESSION (dBc)
FREQUENCY (MHz)
-35
-30
-25
-20
-15
-10
-5
0
0 500 1000 1500 2000 2500 3000 3500 4000
LO
RF
RETURN LOSS (dB)
FREQUENCY (MHz)
-70
-60
-50
-40
-30
-20
-10
0
0 500 1000 1500 2000 2500 3000 3500 4000
+25C
+85C
-40C
CARRIER FEEDTHROUGH (dBm)
FREQUENCY (MHz)
-70
-60
-50
-40
-30
-20
-10
0
0 500 1000 1500 2000 2500 3000 3500 4000
+25C
+85C
-40C
CARRIER FEEDTHROUGH (dBm)
FREQUENCY (MHz)
-30
-20
-10
0
10
20
30
+25C
+85C
-40C
-180
-170
-160
-150
-140
-130
-120
0 500 1000 1500 2000 2500 3000 3500 4000
OUTPUT P1dB (dBm) & OUTPUT IP3 (dBm)
OUTPUT NOISE FLOOR @20 MHz (dBm/Hz)
FREQUENCY (MHz)
NOISE FLOOR
OUTPUT P1dB
OUTPUT IP3
SET-UP NOISE FLOOR
-10
-5
0
5
10
0 500 1000 1500 2000 2500 3000 3500 4000
+25C
+85C
-40C
OUTPUT POWER (dBm)
FREQUENCY (MHz)
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
4
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Wideband Performance
vs. Frequency Over Supply Voltage
Output IP3, P1dB & Noise Floor
@ 20 MHz vs. Offset Frequency
Over Supply Voltage
Uncalibrated Carrier Feedthrough [1]
vs. Frequency Over LO Power
Calibrated Carrier Feedthrough [1]
vs. Frequency Over LO Power
Wideband Performance
vs. Frequency Over LO Power
Output IP3, P1dB & Noise Floor @ 20 MHz
Offset vs. Frequency Over LO Power
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
-10
-5
0
5
10
4.5V
5.0V
5.5V
-60
-45
-30
-15
0
0 500 1000 1500 2000 2500 3000 3500 4000
OUTPUT POWER (dBm)
SIDEBAND SUPPRESSION (dBc)
FREQUENCY (MHz)
SIDEBAND SUPPRESSION
OUTPUT POWER
-30
-20
-10
0
10
20
30
4.5V
5.0V
5.5V
-180
-170
-160
-150
-140
-130
-120
0 500 1000 1500 2000 2500 3000 3500 4000
OUTPUT P1dB (dBm) & IOUTPUT P3 (dBm)
OUTPUT NOISE FLOOR @20 MHz (dBm/Hz)
FREQUENCY (MHz)
NOISE FLOOR
P1dB
IP3
SET-UP NOISE FLOOR
-70
-60
-50
-40
-30
-20
-10
0
0 500 1000 1500 2000 2500 3000 3500 4000
-6 dBm
0 dBm
+6 dBm
CARRIER FEEDTHROUGH (dBm)
FREQUENCY (MHz)
-30
-20
-10
0
10
20
30
-6 dBm
0 dBm
+6 dBm
-180
-170
-160
-150
-140
-130
-120
0 500 1000 1500 2000 2500 3000 3500 4000
OUTPUT P1dB (dBm) & OUTPUT IP3 (dBm)
OUTPUT NOISE FLOOR @20 MHz (dBm/Hz)
FREQUENCY (MHz)
NOISE FLOOR
OUTPUT P1dB
OUTPUT IP3
SET-UP NOISE FLOOR
-10
-5
0
5
10
-6 dBm
0 dBm
+6 dBm
-60
-45
-30
-15
0
0 500 1000 1500 2000 2500 3000 3500 4000
OUTPUT POWER (dBm)
SIDEBAND SUPPRESSION (dBc)
FREQUENCY (MHz)
SIDEBAND SUPPRESSION
OUTPUT POWER
-70
-60
-50
-40
-30
-20
-10
0
0 500 1000 1500 2000 2500 3000 3500 4000
-6 dBm
0 dBm
+6 dBm
CARRIER FEEDTHROUGH (dBm)
FREQUENCY (MHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
5
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
ACPR for W-CDMA @ 2140 MHz, 1 Carrier
Note 1: W-CDMA (Modulation Set-up for ACPR Mode); The
Baseband I and Q input signals were generated using “Test Model 1
with 64 channels” settings in the Agilent E3844C.
Note 2: The I/Q baseband amplitude and phase inputs were offset
to achieve Sideband Rejection (SBR) levels. LO = +6 dBm, SSB
Power = 0 dBm
Absolute Maximum Ratings
Vcc1, Vcc2 0V to +6V
LO Input Power +18 dBm
Baseband Input Voltage (AC + DC)
(Reference to GND) 0V to + 2.8V
Junction Temperature 150 °C
Continuous Pdiss (T = 85°C)
(Derate 49.6 mW/°C above 85°C) 3.2 Watts
Thermal Resistance (Rth)
(channel to ground paddle) 20.2 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC697LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H697
XXXX
HMC697LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H697
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-80
-75
-70
-65
-60
-30 -25 -20 -15 -10 -5 0
ACPR (dBc)
CARRIER OUTPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
6
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Pin Number Function Description Interface Schematic
1, 6, 7, 13, 15 N/C Not connected.
2, 5, 8, 11,
12, 14, 17, 19,
20, 23
GND These pins and the ground paddle should be
connected to a high quality RF/DC ground.
3, 4 LOP, LON LO inputs. Need DC decoupling capacitors.
The ports could be driven single ended or differentially.
9, 10 QN, QP
Q channel differential baseband input. These high
impedance ports should be biased around 1.5V DC.
Nominal recommended baseband input is around
1.6V pp differential.
16 RFOUT DC coupled and matched to 50 Ohms,
output requires blocking capacitor.
18 Vcc1 Supply voltage for the mixer and
output stages 79 mA @ +5V.
21, 22 IP, I N
I channel differential baseband input.
These high impedance ports should be at the
same bias voltage (VbbDC) as Qn & Qp.
24 Vcc2 Supply voltage for the LO stage 88 mA @ +5V.
Pin Descriptions
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
7
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Item Description
J1 - J7 PC Mount SMA Connector
J8, J9 DC Molex Connector
C1 - C3 100 pF Chip Capacitor, 0402 Pkg.
C4, C5 1000 pF Chip Capacitor, 0402 Pkg.
C6, C7 4.7 uF, Case A, Tantalum
R1 0 Ohm Resistor, 0402 Pkg.
R2 49.9 Ohm Resistor, 0402 Pkg.
U1 HMC697LP4 Modulator
PCB [2] 121961 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 121965[1]
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MODULATORS - DIRECT QUADRATURE - SMT
8
HMC697LP4 / 697LP4E
v03.0712
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Application & Evaluation PCB Schematic
Characterization Set-up