●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
20 Super Capacitors Vol.12
d
1
±0.1
P±0.5
Sleeve
D±0.5
0.3 MIN.
H MAX.
ℓMIN.
F
d
2
±0.1
（Terminal）
○＋○−
A1
001
A1
FG FG5.5 V 5.5 V
0.22 F 0.22 F
Negative polarity
identification mark
Super Capacitor
MAX
operating
voltage
Nominal
capacitance
Date
code
Serial
number
6.3 FG Series
Dimensions Markings on sleeve
󱾀FG Type
Specifi cations
Part Number
MAX
operating
voltage
（Vdc）
Nominal capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX
current at
30 min.
（mA）
Voltage
holding
characteristics
（V）
Dimension (unit:mm)
Weight
（g）
φDH P ℓd1d2
Charge
system (F)
Discharge
system (F)
FG0H103ZF 5.5 0.010 0.013 300 0.015 4.2 11.0 5.5 5.08 2.7 0.2 1.2 0.9
FG0H223ZF 5.5 0.022 0.028 200 0.033 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0
FG0H473ZF 5.5 0.047 0.060 200 0.071 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0
FG0H104ZF 5.5 0.10 0.13 100 0.15 4.2 11.0 6.5 5.08 2.7 0.2 1.2 1.3
FG0H224ZF 5.5 0.22 0.28 100 0.33 4.2 13.0 9.0 5.08 2.2 0.4 1.2 2.5
FG0H474ZF 5.5 0.47 0.60 120 0.71 4.2 14.5 18.0 5.08 2.4 0.4 1.2 5.1
FG0H105ZF 5.5 1.0 1.3 65 1.5 4.2 16.5 19.0 5.08 2.7 0.4 1.2 7.0
FG0H225ZF 5.5 2.2 2.8 35 3.3 4.2 21.5 19.0 7.62 3.0 0.6 1.2 12.1
FG0H475ZF 5.5 4.7 6.0 35 7.1 4.2 28.5 22.0 10.16 6.1 0.6 1.4 27.3
FG0V155ZF 3.5 1.5 2.2 65 1.5 −16.5 14.0 5.08 3.1 0.4 1.2 5.2
󱾀FGH Type
Specifi cations
Part Number
MAX
operating
voltage
（Vdc）
Nominal capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX
current at
30 min.
（mA）
Voltage
holding
characteristics
（V）
Dimension (unit:mm)
Weight
（g）
φDH P ℓd1d2
Charge
system (F)
Discharge
system (F)
FGH0H104ZF 5.5 −0.10 100 0.15 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0
FGH0H224ZF 5.5 −0.22 100 0.33 4.2 11.0 7.0 5.08 2.7 0.2 1.2 1.3
FGH0H474ZF 5.5 −0.47 65 0.71 4.2 16.5 8.0 5.08 2.7 0.4 1.2 4.1
FGH0H105ZF 5.5 −1.0 35 1.5 4.2 21.5 9.5 7.62 3.0 0.6 1.2 7.2
󱾀FGR Type
Specifi cations
Part Number
MAX
operating
voltage
（Vdc）
Nominal capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX
current at
30 min.
（mA）
Voltage
holding
characteristics
（V）
Dimension (unit:mm)
Weight
（g）
φDH P ℓd1d2
Charge
system (F)
Discharge
system (F)
FGR0H474ZF 5.5 0.47 0.60 120 0.71 4.2 14.5 18.0 5.08 2.4 0.4 1.2 5.1
FGR0H105ZF 5.5 1.0 1.3 65 1.5 4.2 16.5 19.0 5.08 2.7 0.4 1.2 7.0
FGR0H225ZF 5.5 2.2 2.8 35 3.3 4.2 21.5 19.0 7.62 3.0 0.6 1.2 12.1
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
Super Capacitors Vol.12 21
Specifi cations
Series name
Item FG, FGH type FGR type Test conditions
(conforming to JIS C 5160-1)
Category temperature range −25 ℃ to ＋70 ℃−40 ℃ to ＋85 ℃
MAX operating voltage 5.5Vdc, 3.5Vdc 5.5Vdc
Capacitance FG：0.010F to 4.7F
FGH：0.10F to 1.0F 0.47F to 2.2F Refer to “Measurement Conditions”
Capacitance allowance ＋80 ％, −20 ％＋80 ％, −20 ％Refer to “Measurement Conditions”
ESR Refer to standard ratings Refer to standard ratings Measured at 1kHz, 10mA ; See also
“Measurement Conditions”
Current (30-minutes value) Refer to standard ratings Refer to standard ratings Refer to “Measurement Conditions”
Surge
Capacitance More than 90% of initial ratings More than 90% of initial ratings Surge voltage ：6.3V (5.5V type)
：4.0V(3.5V type)
Charge：30 sec.
Discharge：9min 30sec.
Number of cycles：1000
Series resistance ：0.010F 1500Ω
：0.022F 560Ω
：0.047F 300Ω
：0.10F 150Ω
：0.22F 56Ω
：0.47F 30Ω
：1.0F, 1.5F 15Ω
：2.2F, 4.7F 10Ω
Discharge resistance：0Ω
Temperature ：85±2℃ (FGR)
：70±2℃ (FG, FGH)
ESR
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Current (30 minutes value)
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Appearance No obvious abnormality No obvious abnormality
Characteristics
in different
temperature
Capacitance Phase
2
50% or higher than initial value
Phase
2
50% or higher than initial value
Conforms to 4.17
Phase1 ：＋25±2℃
Phase2 ：−25±2℃
Phase3 ：−40±2℃ (FGR)
Phase4 ：＋25±2℃
Phase5 ：＋70±2℃ (FG, FGH)
：＋85±2℃ (FGR)
Phase6 ：＋25±2℃
ESR
400% or less than initial value 400% or less than initial value
Capacitance Phase
3
Phase
3
30% or higher than initial value
ESR
700% or less than initial value
Capacitance Phase
5
200% or less than initial value
Phase
5
200% or less than initial value
ESR Satisfy initial ratings Satisfy initial ratings
Current (30 minutes value)
1.5CV (mA) or below 1.5CV (mA) or below
Capacitance Phase
6
Within ±20% of initial value
Phase
6
Within ±20% of initial value
ESR Satisfy initial ratings Satisfy initial ratings
Current (30 minutes value)
Satisfy initial ratings Satisfy initial ratings
Lead strength (tensile) No terminal damage No terminal damage Conforms to 4.9
Vibration
resistance
Capacitance
Satisfy initial ratings Satisfy initial ratings Conforms to 4.13
Frequency：10 to 55 Hz
Testing time：6 hours
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
Solderability Over 3/4 of the terminal should
be covered by the new solder
Over 3/4 of the terminal should
be covered by the new solder
Conforms to 4.11
Solder temp：245±5℃
Dipping time：5±0.5 sec.
1.6mm from the bottom should be dipped.
Solder heat
resistance
Capacitance
Satisfy initial ratings Satisfy initial ratings
Conforms to 4.10
Solder temp：260±10 ℃
Dipping time：10±1 sec.
1.6mm from the bottom should be dipped.
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
Temperature
cycle
Capacitance
Satisfy initial ratings Satisfy initial ratings
Conforms to 4.12
Temperature condition：Category MIN temp→Room temp→
Category MAX temp→Room temp
Number of cycles：5 Cycles
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
High temp. and
high humidity
resistance
Capacitance Within ±20% of initial value Within ±20% of initial value
Conforms to 4.14
Temperature：40±2℃
Relative humidity：90 to 95 ％RH
Testing time：240±8 hours
ESR Not to exceed 120% of initial
ratings
Not to exceed 120% of initial
ratings
Current (30 minutes value)
Not to exceed 120% of initial
ratings
Not to exceed 120% of initial
ratings
Appearance No obvious abnormality No obvious abnormality
High
temperature
load
Capacitance Within ±30% of initial value Within ±30% of initial value Conforms to 4.15
Temp：Category MAX temp ±2℃
Voltage applied：MAX operating voltage
Series protection resistance：0Ω
Testing time：1000＋48
 0Hours
ESR Below 200% of initial ratings Below 200% of initial ratings
Current (30 minutes value)
Below 200% of initial ratings Below 200% of initial ratings
Appearance No obvious abnormality No obvious abnormality
Self discharge characteristics
(voltage holding characteristics)
5.5V type: Voltage between
terminal leads higher
than 4.2V
3.5V type: Not specifi ed
Voltage between terminal leads
higher than 4.2V
Charging
condition
Voltage applied：5.0Vdc (Terminal at
the case's side be negative)
Series resistance：0Ω
Charging time：24 hours
Storage
Let stand for 24 hours in condition
described below with terminals opened.
Ambient temperature：Lower than 25℃
Relative humidity：Lower than 70%RH