VCC
50:
LMH0002
SD/HD
VEE
SDO
SDI
SDI RREF
VCC
SDO
750:
50:
0.1 PF
1.0 PF
1.0 PF
VCC
75:75:0.1 PF
75:
5.6 nH
75:
5.6 nH
4.7 PF
4.7 PF
VCC
SD/HD
Differential
Input
LMH0002
www.ti.com
SNLS215E –JANUARY 2006–REVISED APRIL 2013
LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver
Check for Samples: LMH0002
1FEATURES APPLICATIONS
2• SMPTE 292M, SMPTE 344M and SMPTE 259M • SMPTE 292M, SMPTE 344M, and SMPTE 259M
Compliant Serial Digital Interfaces
• Supports DVB-ASI at 270 Mbps • Sonet/SDH and ATM Interfaces
• Data Rates to 1.485 Gbps • Digital Routers and Switches
• Differential Input • Distribution Amplifiers
• 75ΩDifferential Output • Buffer Applications
• Selectable Slew Rate • Set Top Boxes
• Adjustable Output Amplitude • Security Cameras
• Single 3.3V Supply Operation DESCRIPTION
• Operating Temperature Range: Commercial The LMH0002 SMPTE 292M / 259M serial digital
0°C to +70°C (LMH0002MA) or Industrial −40°C cable driver is a monolithic, high-speed cable driver
to +85°C (LMH0002TMA and LMH0002SQ) designed for use in SMPTE 292M / 259M serial
• Typical Power Consumption: 125 mW in SD digital video and ITU-T G.703 serial digital data
Mode and 149 mW in HD Mode transmission applications. The LMH0002 drives 75Ω
transmission lines (Belden 8281, Belden 1694A or
• 8–pin SOIC or 16–pin WQFN Package equivalent) at data rates up to 1.485 Gbps.
• Replaces the GS1528, GS1528A, or GS1578A The LMH0002 provides two selectable slew rates for
SMPTE 259M and SMPTE 292M compliance. The
output voltage swing is adjustable via a single
external resistor.
The LMH0002 is powered from a single 3.3V supply.
Power consumption is typically 125 mW in SD mode
and 149 mW in HD mode. The LMH0002 is available
in an 8-pin SOIC or 16-pin WQFN package.
Typical Application
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 2006–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
LMH0002
SNLS215E –JANUARY 2006–REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)
Supply Voltage: −0.5V to 3.6V
Input Voltage (all inputs) −0.3V to VCC+0.3V
Output Current 28 mA
Storage Temperature Range −65°C to +150°C
Junction Temperature +150°C
Lead Temperature (Soldering 4 Sec) +260°C
Package Thermal Resistance
θJA 8-pin SOIC +160°C/W
θJA 16-pin WQFN +78.9°C/W
θJC 8-pin SOIC +105°C/W
θJC 16-pin WQFN +42.7°C/W
ESD Rating (HBM) 5kV
ESD Rating (MM) 250V
(1) "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be ensured. The
stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values.
The table of Electrical Characteristics specifies acceptable device operating conditions.
Recommended Operating Conditions
Supply Voltage (VCC – VEE): 3.3V ±5%
Operating Free Air Temperature (TA)
LMH0002MA 0°C to +70°C
LMH0002TMA and LMH0002SQ −40°C to +85°C
2Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0002
LMH0002
www.ti.com
SNLS215E –JANUARY 2006–REVISED APRIL 2013
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified(1)(2).
Symbol Parameter Conditions Reference Min Typ Max Units
VCMIN Input Common Mode Voltage SDI, SDI 1.6 + VCC –V
VSDI/2 VSDI/2
VSDI Input Voltage Swing Differential 100 2000 mVP−P
VCMOUT Output Common Mode Voltage SDO, SDO VCC –V
VSDO
VSDO Output Voltage Swing Single-ended, 75Ωload, 750 800 850 mVP-P
RREF = 750Ω1%
Single-ended, 75Ωload, 900 1000 1100 mVP-P
RREF = 590Ω1%
SD/HD Input Voltage Min for SD SD/HD 2.4 V
Max for HD 0.8 V
SD/HD Input Current 3.7 µA
ICC Supply Current SD/HD = 0(3) 45 49 mA
SD/HD = 1(3) 38 43 mA
(1) Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated
referenced to VEE = 0 Volts.
(2) Typical values are stated for VCC = +3.3V and TA= +25°C.
(3) Maximum ICC is measured at VCC = +3.465V and TA= +70°C.
AC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified(1).
Symbol Parameter Conditions Reference Min Typ Max Units
DRSDI Input Data Rate .(2) SDI, SDI 1485 Mbps
tjit Additive Jitter 1.485 Gbps SDO, SDO 26 psP-P
270 Mbps 18 psP-P
tr,tfOutput Rise Time, Fall Time SD/HD = 0, 20% – 80%,(3) 120 220 ps
SD/HD = 1, 20% – 80% 400 560 800 ps
Mismatch in Rise/Fall Time .(2) 30 ps
Duty Cycle Distortion SD/HD = 0, (2) 30 ps
SD/HD = 1, (2) 100 ps
tOS Output Overshoot .(2) 8 %
RLSDO Output Return Loss .(4) 15 20 dB
(1) Typical values are stated for VCC = +3.3V and TA= +25°C.
(2) Specification is ensured by characterization.
(3) Specification is ensured by characterization and verified by test.
(4) Output return loss is dependent on board design. The LMH0002 meets this specification on the SD002 evaluation board from 5MHz to
1.5GHz.
Copyright © 2006–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LMH0002
1
4
3
2LMH0002SQ
(top view)
12
9
10
11
85 6 7
1316 15 14
VEE
SDI
SDI SDO
SD/HD
VCC
NC NC
NC
NC
NC
NC
NC
NC
RREF
SDO
SDO
SDO
1
2
3
4 5
6
7
8
LMH002MA
SDI
RREF
SDI
SD/HD
VCC
VEE
LMH0002
SNLS215E –JANUARY 2006–REVISED APRIL 2013
www.ti.com
CONNECTION DIAGRAM
Figure 1. 8-Pin SOIC
See D Package
Figure 2. 16-Pin WQFN
See RUM0016A Package
Table 1. PIN DESCRIPTIONS
SOIC WQFN Name Description
Pin # Pin #
1 1 SDI Serial data true input.
2 2 SDI Serial data complement input.
3 3 VEE Negative power supply (ground).
4 4 RREF Output driver level control. Connect a resistor to VCC to set output voltage swing.
5 9 VCC Positive power supply (+3.3V).
6 10 SD/HD Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and
SMPTE 259M when high.
7 11 SDO Serial data complement output.
8 12 SDO Serial data true output.
— 5, 6, 7, 8, NC No connect.
13, 14, 15,
16
— DAP VEE Connect exposed DAP to negative power supply (ground).
4Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0002
10 k:
SDI
SDI
VCC
10 k:
5 k:
80:
VCC
10 k:
LMH0002
www.ti.com
SNLS215E –JANUARY 2006–REVISED APRIL 2013
APPLICATION INFORMATION
Device Operation
INPUT INTERFACING
The LMH0002 accepts either differential or single-ended input. The inputs are self-biased, allowing for simple AC
or DC coupling. DC-coupled inputs must be kept within the specified common-mode range. SDI and SDI are self-
biased at approximately 2.1V with VCC = 3.3V. Figure 3 shows the differential input stage for SDI and SDI.
Figure 3. Differential Input Stage for SDI and SDI.
OUTPUT INTERFACING
The LMH0002 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75ΩAC-coupled
coaxial cable (with RREF = 750Ω). Output level is controlled by the value of the RREF resistor connected between
the RREF pin and VCC.
The RREF resistor should be placed as close as possible to the RREF pin. In addition, the copper in the plane
layers below the RREF network should be removed to minimize parasitic capacitance.
OUTPUT SLEW RATE CONTROL
The LMH0002 output rise and fall times are selectable for either SMPTE 259M or SMPTE 292M compliance via
the SD/HD pin. For slower rise and fall times, or SMPTE 259M compliance, SD/HD is set high. For faster rise
and fall times, or SMPTE 292M compliance, SD/HD is set low.
REPLACING THE GENNUM GS1528, GS1528A, and GS1578A
The LMH0002MA is form-fit-function compatible with the Gennum GS1528 and GS1528A. The LMH0002SQ is
form-fit-function compatible with the Gennum GS1578A.
Copyright © 2006–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LMH0002
LMH0002
SNLS215E –JANUARY 2006–REVISED APRIL 2013
www.ti.com
REVISION HISTORY
Changes from Revision D (April 2013) to Revision E Page
• Changed layout of National Data Sheet to TI format ............................................................................................................ 5
6Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0002
PACKAGE OPTION ADDENDUM
www.ti.com 1-Nov-2013
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
LMH0002MA NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 L002
LMH0002MA/NOPB ACTIVE SOIC D 8 95 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 L002
LMH0002MAX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 L002
LMH0002SQ NRND WQFN RUM 16 1000 TBD Call TI Call TI L002
LMH0002SQ/NOPB ACTIVE WQFN RUM 16 1000 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM L002
LMH0002SQ/S250 ACTIVE WQFN RUM 16 250 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM L002
LMH0002SQE/NOPB ACTIVE WQFN RUM 16 250 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM L002
LMH0002SQX/NOPB ACTIVE WQFN RUM 16 4500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM L002
LMH0002TMA NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 L002T
LMH0002TMA/NOPB ACTIVE SOIC D 8 95 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 L002T
LMH0002TMAX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 L002T
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
PACKAGE OPTION ADDENDUM
www.ti.com 1-Nov-2013
Addendum-Page 2
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LMH0002MAX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1
LMH0002SQ WQFN RUM 16 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LMH0002SQ/NOPB WQFN RUM 16 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LMH0002SQ/S250 WQFN RUM 16 250 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LMH0002SQE/NOPB WQFN RUM 16 250 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LMH0002SQX/NOPB WQFN RUM 16 4500 330.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1
LMH0002TMAX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 23-Sep-2013
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LMH0002MAX/NOPB SOIC D 8 2500 367.0 367.0 35.0
LMH0002SQ WQFN RUM 16 1000 210.0 185.0 35.0
LMH0002SQ/NOPB WQFN RUM 16 1000 210.0 185.0 35.0
LMH0002SQ/S250 WQFN RUM 16 250 210.0 185.0 35.0
LMH0002SQE/NOPB WQFN RUM 16 250 210.0 185.0 35.0
LMH0002SQX/NOPB WQFN RUM 16 4500 367.0 367.0 35.0
LMH0002TMAX/NOPB SOIC D 8 2500 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 23-Sep-2013
Pack Materials-Page 2
MECHANICAL DATA
RUM0016A
www.ti.com
SQB16A (Rev A)
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
