HMC421QS16 / 421QS16E v04.0810 Typical Applications Features The HMC421QS16 / HMC421QS16E is ideal for: Input IP3: +19 dBm * GSM, GPRS & EDGE Infrastructure Integrated IF & LO Amps: +10 dBm LO * CDMA, WCDMA Infrastructure Conversion Gain: 9 dB * PHS & PDC Infrastructure Noise Figure: 9 dB TE Single Positive Supply: +5V @ 60 mA Functional Diagram General Description LE The HMC421QS16 & HMC421QS16E are high linearity down-converter receiver ICs suitable for PCS/UMTS infrastructure applications. The receiver IC is designed to support UMTS applications where a high third order intercept point (OIP3) is required. A passive mixer coupled with a high dynamic range IF amplifier achieves an Input IP3 of +19 dBm. The converter provides a gain of 8 dB and 9 dB typical single side band noise. The IC operates from positive +5V rails and consumes 60 mA of current. The design requires no external Baluns. The mixer supports IF frequencies between 50 MHz and 300 MHz. B SO MIXERS - DOWNCONVERTERS - SMT 9 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz Electrical Specifications, TA = +25 C, LO = +10 dBm, Vdd = 5V O Parameter IF= 100 MHz Min. Typ. Max. IF= 250 MHz Min. Typ. IF= 250 MHz Max. Min. Typ. Max. Units Frequency Range, RF 1.4 - 1.6 1.7 - 2.0 2.0 - 2.3 GHz Frequency Range, LO 1.3 - 1.55 1.4 - 1.95 1.7 - 2.25 GHz 50 - 300 MHz Frequency Range, IF* Conversion Gain 50 - 100 6 Noise Figure (SSB) 50 - 300 9 7 11 9 5 9 8 dB 9.5 dB LO to RF Isolation 23 29 28 33 26 32 dB LO to IF Isolation 35 42 42 52 50 60 dB RF to IF Isolation 35 42 42 52 50 60 dB IP3 (Input) 15 18 17 19 17 20 dBm 1 dB Compression (Input) 3 6 4 6.5 4 7 dBm +8 to +12 dBm LO Input Drive Level (Typical) Supply Current (Idd for LO & IF) (IF bias resistor= 6.8 Ohms) +8 to +12 84 +8 to +12 105 84 105 84 105 mA * If matching must be tuned for optimal results, see application circuit herein. 9-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC421QS16 / 421QS16E v04.0810 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz Isolation @ LO = +10 dBm 0 12 -15 ISOLATION (dB) 10 8 6 -45 -60 RF/IF LO/RF LO/IF -75 2 -90 0 1 1.5 2 1 2.5 2.5 Return Loss @ LO = +10 dBm 0 14 12 -5 8 6 B SO 10 LO = +4 dBm LO = +6 dBm LO = +8 dBm LO = +10 dBm LO = +12 dBm LO = +13 dBm 4 2 0 1 1.5 2 -10 -15 -20 RF LO -25 -30 1 2.5 1.5 Conversion Gain vs. Vdd @ LO = +10 dBm O 14 12 10 RESPONSE (dB) 10 8 +4.5V +5.0V +5.5V 4 2.5 IF Bandwidth @ LO = +10 dBm 14 6 2 FREQUENCY (GHz) FREQUENCY (GHz) CONVERSION GAIN (dB) 2 LE Conversion Gain vs. LO Drive 1.5 FREQUENCY (GHz) FREQUENCY (GHz) CONVERSION GAIN (dB) -30 TE +25 C -40 C +85 C 4 9 MIXERS - DOWNCONVERTERS - SMT 14 RETURN LOSS (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = +10 dBm 6 CONVERSION GAIN RETURN LOSS 2 -2 -6 2 0 -10 1 1.5 2 FREQUENCY (GHz) 2.5 0 0.1 0.2 0.3 0.4 0.5 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 9-2 HMC421QS16 / 421QS16E v04.0810 Input P1dB vs. Vdd @ LO = +10 dBm 10 8 8 INPUT P1dB (dBm) 10 6 +25 C -40 C +85 C 2 0 1.4 1.6 1.8 2 2.2 0 1.4 2.4 1.6 1.8 2 2.2 2.4 LE Input and Output IP3 vs. LO Drive* 40 40 OIP3 30 OIP3 30 B SO IIP3 0 1.4 +4.5V +5.0V +5.5V FREQUENCY (GHz) Input and Output IP3 vs. Temperature @ LO = +10 dBm* 10 4 2 FREQUENCY (GHz) 20 6 TE 4 IP3 (dBm) INPUT P1dB (dBm) Input P1dB vs. Temperature @ LO = +10 dBm IP3 (dBm) MIXERS - DOWNCONVERTERS - SMT 9 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz OUTPUT, +25C OUTPUT, -40C OUTPUT, +85C INPUT, +25C INPUT, -40C INPUT, +85C 1.6 1.8 2 2.2 20 OUTPUT, LO = +8dBm OUTPUT, LO = +10dBm OUTPUT, LO = +12dBm INPUT, LO = +8dBm INPUT, LO = +10dBm INPUT, LO = +12dBm 10 0 1.4 2.4 1.6 FREQUENCY (GHz) 1.8 2 2.2 2.4 2.2 2.4 FREQUENCY (GHz) Input IP2 vs. Temperature @ LO = +10 dBm* O Input and Output IP3 vs. Vdd @ LO = +10 dBm* IIP3 40 80 OIP3 IIP3 20 OUTPUT, Vdd = +4.5V OUTPUT, Vdd = +5.0V OUTPUT, Vdd = 5.5V INPUT, Vdd = +4.5v INPUT, Vdd = +5.0V INPUT, Vdd = 5.5V 10 0 1.4 1.6 1.8 + 25 C -40 C + 85 C 75 IP2 (dBm) IP3 (dBm) 30 2 2.2 70 65 2.4 FREQUENCY (GHz) 60 1.4 1.6 1.8 2 FREQUENCY (GHz) * Two-tone input power= -5 dBm each tone, 1 MHz spacing. 9-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC421QS16 / 421QS16E v04.0810 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz Noise Figure Swept IF, Fixed LO = 2 GHz 15 +25 C -40 C +85 C 13 NOISE FIGURE (dB) 11 9 7 5 1.6 1.8 2 2.2 2.4 0 1 2 3 0 XX 42 55 47 0 66 80 4 103 50 >108 >108 >108 >108 0.3 0.4 nLO Spur @ RF Port 4 LO Freq. (GHz) 1 2 3 4 52 1.4 27 16 33 33 1.6 30 19 33 42 1.8 32 19 29 35 89 B SO 3 LE nLO 0 65 0.2 Harmonics of LO mRF >108 0.1 FREQUENCY (GHz) MxN Spurious @ IF Port 2 9 7 FREQUENCY (GHz) 1 11 TE NOISE FIGURE (dB) 13 5 1.4 9 15 99 106 >108 80 >108 2 33 19 30 49 >108 >108 >108 2.2 33 20 34 45 2.4 28 20 34 42 LO = +10 dBm All values in dBc below input LO level @ RF port. O RF = 2.05 GHz @ -10 dBm LO = 1.8 GHz @ +10 dBm All values in dBc relative to the IF power level. MIXERS - DOWNCONVERTERS - SMT Noise Figure vs. Temperature, Swept LO, Fixed IF = 250 MHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 9-4 HMC421QS16 / 421QS16E v04.0810 Typical Supply Current vs. Vdd RF / IF Input (Vdd= +5V) +13 dBm Vdd (LO + IF) (Vdc) (Idd) mA LO Drive (Vdd= +5V) +15 dBm 4.5 61 Vdd (LO or IF) +7 Vdc 5.0 62 Channel Temperature 150C 5.5 63 Continuous Pdiss (T = 85C) (Derate 6.34 mW/C above 85 C) 0.41 W Storage Temperature -65 to +150C Operating Temperature -40 to +85C TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO LE Outline Drawing O MIXERS - DOWNCONVERTERS - SMT 9 Absolute Maximum Ratings PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC421QS16 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC421QS16E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] HMC421 XXXX HMC421 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 9-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC421QS16 / 421QS16E v04.0810 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz Function Description Interface Schematic 1, 7, 9, 14, 16 N/C Not Connected 2 LO This pin is AC coupled and matched to 50 Ohm from 1.3 - 2.5 GHz. 3, 4, 11, 12, 13 GND Pin must connect to RF ground. 5 Vdd LO Power supply for the LO amplifier. One external RF bypass capacitor (10,000 pF) is required. 6 Vdd IF Bias voltage for IF amplifier. One external RF bypass capacitor (10,000 pF) is required. B SO LE TE Pin Number IF Bias DC bias setting for IF amplifier. 10 IF Output of IF and bias port for amplifier. A pull up inductor (L1), output matching network (C5, C6, L2), and 10,000 pF bypass capacitor (C4) are required. O 8 15 RF 9 MIXERS - DOWNCONVERTERS - SMT Pin Descriptions This pin is DC coupled and matched to 50 Ohm from 1.7 - 2.5 GHz. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 9-6 HMC421QS16 / 421QS16E v04.0810 Evaluation PCB B SO LE TE MIXERS - DOWNCONVERTERS - SMT 9 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz O List of Materials for Evaluation PCB 105087 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pins C1 1000 pF Chip Capacitor, 0603 Pkg. C2, C3, C4 0.01 F Chip Capacitor, 0603 Pkg. C5 82 pF Chip Capacitor, 0402 Pkg. C6 6 pF Chip Capacitor, 0603 Pkg. L1 150 nH Chip Inductor, 0805 Pkg. L2 27 nH Chip Inductor, 0805 R1 6.8 Ohm Resistor, 0603 U1 HMC421QS16 / HMC421QS16E Mixer PCB [2] 104814 Evaluation Board, 1.100" x 1.100" The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC421QS16 / 421QS16E v04.0810 PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz Application Circuit O Notes: 1. Pin 5 and Pin 6 may be connected to a common Vdd supply. 2. Select C6 & L2 to optimize IF frequency. Values for IF = 250 MHz are shown. MIXERS - DOWNCONVERTERS - SMT B SO LE TE 9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 9-8