12
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
13
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION
• WIDE TEMPERATURE -40° ~+105°C
• LONG LIFE (+105°C, 2000 HOURS)
• 6.3 mm MAXIMUM HEIGHT
• DESIGNED FOR REFLOW..SOLDERING
Surface Mount Aluminum Electrolytic Capacitors NACH Series
MAXIMUM ESR
(Ω AT 120Hz AND 20OC)
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 120Hz AND 105OC)
* Optional ± 10% (K) Tolerance available on most values. Contact factory for availability.
** DF is 0.16 for NACH470M25V6.3X8
CHARACTERISTICS
zHycneuqerF 05 ≤001<f 001 ≤K1<f K1 ≤K01<f K01 ≤f < K001
noitcerroC
rotcaF 8.0 0.1 3.1 5.1
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your speci c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
Rated Voltage Range 4 ~ 50Vdc
Rate Capacitance Range 0.1 ~ 220µF
Operating Temp. Range -40°C ~ +105°C
Capacitance Tolerance ±20% (M), ±10% (K)*
Max. Leakage Current
After 2 Minutes @ 20°C
0.01CV or 3µA
whichever is greater
Working Voltage/Surge Voltage
Max. Tan δ @120Hz/20°C
W.V. (Vdc) 4 6.3 10 16 25 35 50
S.V. (Vdc) 5 8.0 13 20 32 44 63
Dissipation Factor 0.50 0.30 0.22 0.16 0.14** 0.12 0.12
Low Temperature Stability
Impedance Ratio @ 120Hz
Z-40°C/Z+20°C 7 4 3 2 2 2 2
Z-55/Z+20°C 12 8 6 4 4 3 3
Load Life Test @105°C
2,000 Hours
Capacitance Change Within ±25% of initial measured value
Tan δLess than 200% of speci ed value
Leakage Current Less than speci ed value
Cap. (µF) Working Voltage (Vdc)
4.0 6.3 10 16 25 35 50
0.1 - - - - - - 1.0
0.22 - - - - - - 2.0
0.33 - - - - - - 3.0
0.47 - - - - - - 5.0
1.0 - - - - - - 10
2.2 - - - - - - 16
3.3 - - - - - - 16
4.7 - - - - 22 - 23
10 - - - 28 - 28 35
22 - 26 - 39 - 55 -
33 - 29 43 - 65 - -
47 34 46 - 70 - - -
100 61 71 - - - - -
220 82 - - - - - -
Cap. (µF) Working Voltage (Vdc)
4.0 6.3 10 16 25 35 50
0.1 - - - - - - 1993
0.22 - - - - - - 906
0.33 - - - - - - 604
0.47 - - - - - - 424
1.0 - - - - - - 199
2.2 - - - - - - 90.6
3.3 - - - - - - 60.4
4.7 - - - - 49.5 - 42.4
10 - - - 26.6 - 19.9 19.9
22 - 22.6 - 12.1 - 9.05 -
33 - 15.1 11.1 - 7.05 - -
47 17.7 10.6 - 5.66 - - -
100 8.31 4.98 - - - - -
220 3.77 - - - - - -
12
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
13
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Surface Mount Aluminum Electrolytic Capacitors NACH Series
STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm)
DIMENSIONS (mm)
µ
NACH 100 M 35V 5x6.3 TR 13 F
RoHS Compliant
97% Sn (min.), 3% Bi (max.)
330mm (13”) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, rst 2 digits are signicant
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
PART NUMBER SYSTEM
0.3mm max.
Dφ
L
+ -
II
W
P
A
B
Case Size Dφ ±0.5 L max. A ±0.2 B ±0.2 I ±0.2 W P ±0.2
4 x 6.3 4.0 6.3 4.3 4.3 1.8 0.5 ~ 0.8 1.0
5 x 6.3 5.0 6.3 5.3 5.3 2.2 0.5 ~ 0.8 1.5
6.3 x 6.3 6.3 6.3 6.6 6.6 2.5 0.5 ~ 0.8 2.2
