SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE *
SHIELD TERMINATOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. DOCUMENT NO. B-053-70-01
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D981269 REPLACES:
D961370
DRAWN BY:
M. FORONDA DATE: 6-Nov-98 PROD. REV.:
SEE TABLE DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product
Name øA
min øB
min L
max øD
max ød
min øE
min
B-053-70-01 K 10.0
(0.395) 11.6
(0.455) 31.2
(1.230) 10.0
(0.395) 4.4
(0.175) 8.0
(0.315)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX: (Qty: 2)
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: clear.
4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: red.
APPLICATION
1. This controlled soldering device is designed for termination of a tin plated braid to the tin plated shield of a cable having an
insulation rated for at least +125°C.
2. Temperature range: -55°C to +150°C.
3. For application tooling , contact your local Raychem technical service.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
