101020026 - SEEED DEVELOPMENT LIMITED

Bazaar Propagate Wiki Login | Sign up

Feedback & Ideas｜Help

Bazaar / Grove / Sensor for Grove / Grove - Infrared Emitter

Fusion Community

Category

Search for products, brands and platforms

ADD TO CART

Description

Best-sellers

Technical Details

Learn

Reviews

Questions and Answers

View History

Best-sellers

Technical Details

Dimensions 20mm x 20mm x 18mm

Weight G.W 6g

Battery Exclude

Part List

Grove - Infrared Emitter 1

Documents

Wiki

IR Send and Receiver Library

Description

The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is

an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED,

with its color centered around 940nm. We can use the emitter not only to transmit data or

commands, but also to emulate remotes to control your home appliance using an Arduino. The

Infrared Emitter can transmit signals reliable up to 10 meters. Beyond 10 meters, the receiver

may not get the signals.

For all Grove users (especially beginners), we provide you guidance PDF documents. Please

download and read through Preface - Getting Started and Introduction to Grove before your

using of the product.

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help

us improve the documents, add more demo code or tutorials. For technical support, please

post your questions to our forum.

Grove - Infrared Emitter

SKU 101020026

Read all 1 reviews

IN STOCK 9 Available

Grove - Infrared Receiver

Grove - Relay

Grove - PIR Motion Sensor

Grove - Universal 4 Pin 20c…

USD 

NFC Card Controlled Remote Car

This is a remote control car. Not controlled by ubiquitous remotes,

like joystick, but a set of NFC cards. That makes it a challenge to

rational thinking. Want it run smoother and faster? That depends

on how you design the commands set it executes.

IR Remote Agent

Remote control is almost a standard accessory for most home

applications, like TV, Hi-Fi, air conditioner and so on. Though

remote control brings us leisure, when you really need it but have

completely no clue where it is, or which one it is, you have eve

Magic Bracelet

In this tutorial I would like to introduce the Magic Bracelet.

IR Remote

Remote control is almost a standard accessory for most home

applications, like TV, air conditioner and so on. Dozens of

companies have released many different kinds of IR remote control

products. Like airbox from haier.

Pet House Alarm

Are you afraid of dogs? It can be true for most people. But

sometimes you may approach a pet house with bad dogs inside by

accident. What can we do to avoid things like this? Our cool play

makers give us the answer!

TSAL6200 Datasheet

Grove-Infrared Emitter eagle files

Learn

Feb 22,2017 by Mark Tseng Taiwan Was this review helpful ?  0

Reviews

work good

good

lolop24 on Apr 13,2017

Can it work with odroid c2?

Is it possible to access this device via the Raspberry Pi? Does it expose itself as a serial device, or is it only

accesible via the GPIO library?

Questions and Answers

Have a question about this? Ask people who own it.



upvote (0)

ae on Apr 14,2017 10:34 AM

Hello, I am sorry but I don't know much about ordoid c2. Please refer to wiki for more details.Thanks.



upvote (0)

Brett Carlock on Oct 19,2016

CloudRuan on Oct 19,2016

Can it work with Raspberry Pi?

Lucas Coelho Cavalheiro on Oct 19,2016

Does it work with 3V supply and 3V TX logic signal? I want to use with a board which is completely powered

with a 3V coin battery.

Muhammad Aftab on Oct 19,2016

Hi, it's working with UNO, but I am unable to make it work with Arduino Mega ADK or Seeduino ADK. Any

suggestions? Thanks in advance

Hisham on Oct 19,2016

Can I Connect It And The Receiver As Well With Out Using The Grove Base Shield ??!

Mario Carta Loureiro Junior on Oct 19,2016

Could be a panel mounted of this and the IR receiver... Can you make it? Thanks!

Robert Barnes on Oct 19,2016

It's not an option in the customized grove kit?



upvote (0)

Martin Pydde on Oct 20,2016 10:43 AM

im not from seeed, but i guess 99% this is true:"you can panelize to save the cost, but you need to cut the board

by yourself"-that means no extra cutting option, you would have to just fit one board into 5x10, instead of 2, if you

want a cut.<



upvote (0)



upvote (0)



upvote (0)

Terry Chen on Oct 20,2016 10:46 AM

Hi.3.3V could supply this work.I think that you use 5V better than 3V~~



upvote (0)



upvote (0)

Alex Liu on Oct 20,2016 10:47 AM

Hello Muhammad, it is compatible with Mega ADK and Seeeduino ADK. When programming/compiling, you need

to change the option of the board in Arduino IDE from Arduino Uno to Arduino ADK.



upvote (0)



upvote (0)

Jacket Chen on Oct 20,2016 10:45 AM

Hi.Of course yes,our base shield is a transfer borad.You can connect it to Arduino/Seeeduino directly.



upvote (0)



upvote (0)

Jacket Chen on Oct 20,2016 10:44 AM

Hi Mario.Maybe you could do that, but we have not provided this.



upvote (0)



upvote (0)

haozhang on Oct 20,2016 10:40 AM

Thanks for asking. It's added into the list.

Got a status update. Apparently they just shipped it. Thank you.



upvote (0)

email address

Select Language ▼