1
CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1
Mounting Brackets
E39-L/F39-L
Slits/Reflectors
E39-S/E39-R
Mounting Brackets [Refer to Dimensions on page 5.]
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L2 Iron, zinc plating 1 Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
5
E39-L4 Iron, zinc plating 1 Slotted/Phillips screws M3 × 12
(with spring and plain washers) Iron, zinc plating 2 E32-T16 (20)
E39-L6 Iron, zinc plating 1 Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
E39-L31 Iron, zinc plating 1 Slotted/Phillips screws, M3 × 12
(with spring washers) Iron, zinc plating 2 E3C-S50 (8)
E39-L40 Iron, zinc plating 1
Phillips screws M4 × 25
(with spring and plain washers)
Iron, zinc plating 2
E3JK
Nuts M4 Iron, zinc plating 2
E39-L41 Iron, zinc plating 2
Phillips screws M3 × 14
(with spring washers)
Iron, zinc plating 4
6
E3C-1 (10)
Plain washer M3 Iron, zinc plating 4
E39-L42 Iron,
black coating 2
Phillips screws M3 × 10
(with spring washers)
Plain washer M3
Iron, zinc plating
Iron, zinc plating
4
4
E3C-2 (20)
E3C-DS10 (19)
E3C-VS1G (19)
E3C-VS3R (19)
E39-L43 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L44 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L51 Iron, zinc plating 1
Slotted/Phillips screws M4 × 30
(with spring and plain washers)
Iron, zinc plating 2E3JM (40)
Nuts M4 Iron, nickel plating 2
E39-L53 Iron, zinc plating 1 --- --- --- E3JM (40)
E39-L54V Stainless steel
(SUS304) 1 --- --- --- E32-T54V
6
E39-L69 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R1@ (20)
E3S-R3@ (20)
E39-L70 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R6@ (20)
E3S-R8@ (20)
E39-L83 Stainless steel 1 --- --- --- E32-T24S
E32-A03
E39-L85 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E39-L86 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E39-L87 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E3S-CR62/67 (25.4)
2
E39-L/F39-L/E39-S/E39-R
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L93FH Stainless steel
(SUS304) 1
Holder (upper) Heat-resistant ABS resin 1
E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
8
Holder (lower) 66 nylon 1
Pipe Stainless steel (SUS304) 1
E39-L93FV Stainless steel
(SUS304) 1
Bolts M4 × 12 with Hexagonal
holes
Iron, nickel plating 2
Bolts M4 × 30 with hexagonal
holes
Iron, nickel plating 1
E39-L93H Stainless steel
(SUS304) 1Phillips screws M3 × 12
(with spring and plain washers)
Stainless steel (SUS304) 2
E39-L93V Stainless steel
(SUS304) 1
Spring washer M4 Iron, nickel plating 1
Plain washer M4 Iron, nickel plating 1
Nuts M4 Iron, nickel plating 3
E39-L93XY --- ---
Holder 66 nylon 1 E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
9
Pipe Stainless steel (SUS304) 1
Bolts M5 × 16 with hexagonal holes Stainless steel (SUS304) 2
Nuts M5 Stainless steel (SUS304) 2
E39-L94 Iron, zinc plating 2 Phillips screws M3 × 10 Iron, zinc plating 4 E32-T16P (19)
Nuts M3 Iron, zinc plating 4
E39-L96
* For installation
of Sensor
Adjuster E39-
L93
Stainless steel
(SUS304) 1Phillips screws M3 × 6
(with spring and plain washers) Iron, nickel plating 2 E39-R1
E39-L97 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R1@/R3@ (20)
E39-L98 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2
E3Z pre-wired model
(25.4)
E3S-R6@/R8@ (20)
E39-L102 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (horizontal type)
(25.4)
10
E39-L103 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (vertical type) (25.4)
E3S-CR62/67 (25.4)
E39-L104 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2
E3Z pre-wired model
(25.4)
E32-R21 (for installation of
E39-R3) (25.4)
E39-L109 Stainless steel
(SUS430) 1 --- --- --- E32-S15-@ (13.2)
E39-L114 Stainless steel
(SUS430) 2 Phillips screws M5 × 10 Iron, zinc plating 4 E3MC (28)
E39-L115 Stainless steel
(SUS304) 1Phillips screws M5 × 8 Iron, zinc plating 4 E3MC
Slotted/Phillips screws M3 × 8 Iron, nickel plating 2
E39-L116 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
11
E39-L117 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
E39-L118 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
E39-L119 Stainless steel
(SUS304) 1 --- --- --- E3T-F (8)
E39-L120 Stainless steel
(SUS304) 1 --- --- --- E3T-F (8)
E39-L127-T1 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
E3C-S10 (7.5)
Spring washer M2.3 Iron, zinc plating 4
E39-L127-T2 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
Spring washer M2.3 Iron, zinc plating 4
E39-L127-T3 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
Spring washer M2.3 Iron, zinc plating 4
E39-L/F39-L/E39-S/E39-R
3
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L131 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2
E3G-R1@ (25)
E3G-L7@ (25)
12
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L132 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2
E3G-R1@ (25)
E3G-L7@ (25)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L135 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2
E3G-MR19 (T)
E3G-ML79 (T)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L136 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2
E3G-MR19 (T)
E3G-ML79 (T)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L142 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L143 Stainless steel
(SUS304) 1 None --- ---
E3X-DA-S/MDA
E3X-NA
E3C-LDA
E2C-EDA
E4C-UDA
E39-L144 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
13
E39-L148 Stainless steel
(SUS304) 1 None --- --- E3X-NA
E39-L149 Iron,
black coating 1 None --- E3Z-G
E39-L150 Stainless steel
(SUS304) 1
Holder/bracket PBT (polybutylene tereph-
thalate) 1
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
Shaft (brace) Stainless steel (SUS304) 1
Bolt with hexagonal hole Stainless steel (SUSXM7) 1
Nut Stainless steel (SUS304) 1
Phillips screw Stainless steel (SUSXM7) 1
Slotted/Phillips screws Stainless steel (SUS304) 2
E39-L151 Stainless steel
(SUS304) 1
Holder/bracket PBT (polybutylene tereph-
thalate) 1
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
Shaft (brace) Stainless steel (SUS304) 1
Bolt with hexagonal hole Stainless steel (SUSXM7) 1
Nut Stainless steel (SUS304) 1
Phillips screw Stainless steel (SUSXM7) 1
Slotted/Phillips screws Stainless steel (SUS304) 2
E39-L153 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Stainless steel (SUSXM7)
Stainless steel (SUS304) 2E3Z pre-wired model
(25.4)
4
E39-L/F39-L/E39-S/E39-R
Contact Mounting Plates [Refer to Dimensions on page 13.]
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Slits
Note: Applicable models that appear shaded come with the Slits at left as accessories
Reflectors (Refer to Dimensions on page 14.)
*1. 40° or higher for E3JM-R and E3JK-R.
*2. 40° or higher for E3G-R.
* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@.
Model Material Count Applicable type Page
Dimensions
E39-L60 PBT (polybutylene terephthalate) 1 E3S-R@613
Model Slit width Installation procedure Applicable type
E39-S39 Width 1 × 20 mm Seal type E3JM-10@4 (T)-N
E3JK-5@@-N
E39-S60 Width 0.5, 1 × 15 mm Seal type E32-T16
E39-S61 Width 0.5, 1, 2, 4 × 11 mm
Plug-in type
E3S-CT@1
E39-S63 0.5-mm dia., 1 mm E3T-ST1@
E39-S64 0.5-mm dia., 1 mm E3T-FT1@
E39-S65A 0.5 mm dia.
E3Z-T@@
E39-S65B 1-mm dia.
E39-S65C 2-mm dia.
E39-S65D Width 0.5 × 10 mm
E39-S65E Width 1 × 10 mm
E39-S65F Width 2 × 10 mm
E39-S68 Width 0.5, 1 × 13.4 mm Seal type E32-T16P
E32-T16PR
Name Reflectors Non-fogging
reflective plate Reflectors Special Reflec-
tor for E3ZM-B
Item Model E39-R1 E39-R1S E39-R1K E39-R2 E39-R6 E39-R10 E39-RP1
Directional angle 30° min. *130° min. *230° min.
Ambient operating
temperature range −25 to 55°C−40 to 60°C
Ambient storage
temperature range −40 to 70°C−40 to 55°C−40 to 70°C
Ambient operating
humidity range 35% to 85% 35% to 95% 35% to 85%
Ambient storage
humidity range 35% to 95%
Degree of protection IEC IP67
Accessories ---
Name Small reflector Tape reflector *
Item Model E39-R9 E39-R3 E39-R4 E39-R37-CA *E39-RS1
E39-RS1-CA
E39-RS2
E39-RS2-CA
E39-RS3
E39-RS3-CA
Directional angle 30° min.
Ambient operating
temperature range −25 to 55°C
Ambient storage
temperature range −40 to 70°C 0 to 40°C
Ambient operating
humidity range 35% to 95% 35% to 85%
Ambient storage
humidity range 35% to 95% 35% to 85%
Degree of protection IEC IP67
Accessories ---
Mounting Brack-
ets E39-L104
(with screws)
---
Phillips screws M3
× 3, spring wash-
ers M3, nuts M3
---
Name Laser Reflectors
Standard Short-distance transpar-
ent object detection Sheets
Item Model E39-R12 E39-R13 E39-R14 E39-RS4 E39-RS5
Ambient operating
temperature range −10 to 55°C (No icing)
Ambient storage
temperature range −25 to 70°C (No icing)
Ambient operating
humidity range 35 to 85% (No condensation)
Ambient storage
humidity range 35 to 85% (No condensation)
E39-L/F39-L/E39-S/E39-R
5
Mounting Bracket Dimensions (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
5
25
5
4.2
10.2
20.2
25.4
5.6
41
2.1R
4.2
25.4
Two, M4
slotted,
hexagonal
bolts
92.1
82.1
9 29.1
1.6
Optical axis
E39-L2
Material: Iron
E39-L4
Material: Iron
4
20
11
2.3
3.2
Four,
R1.6
Two,
3.2 dia.
1.2
5.5
20±0.2
58
33
5
3.2
4
3.2
20
Four, R1.6
E39-L6
4.2
4.2
4.2
5
5
25.4
6.5
(R2.1)
5
4.2
12
12
20
20
5
25.4 6.5
39
1.6
Material: Iron
E39-L31
Material: Iron
4.5 dia. max.
Pushing out height: 0.6 min.
10.5
3.2
17
12
4.2 3.2
3.9
6
10.5
3.2
17
Four, R1.6
4.2 3.2
3.9
6
1
8
6
R3 Two, M3
1
12 22
42
±0.1
50
40
±0.1
58
24 4.4
10°
45°
Two, R5.6
31.2
R2.2
R2.2
60°
2
21.9
Two, R5 Two, R5
Two, 4.4 dia.
5
Two, R5
60
49
18
±0.1
6 dia.
7
6.4
10
±0.1
R3.2 R3.2
6.4
Two, R5
R56.6
±0.1
E39-L40
Material: Iron
6
E39-L/F39-L/E39-S/E39-R
Material: Iron
10±0.1
R3
1
2-M3
6
4.5 dia. max.
Pushing out height: 0.6 min.
13.5
17.5
3.2
3.2
75.5
R1.6
R1.6
1
11
15.5
10
3.2
5
3.2
11.5
5
E39-L41 E39-L42
Material: Iron
23
27
6.5
3.2
12
4.5
3.2 8
3.2
21
15.5
4.5 R1.6
R1.6
17
3.2
1
13 6
3.4 5
30
1.2 3.5 3.5
R2
R2
3.4 15
40
25.4
7
7.5
Four, 3.2 dia.
R1
20°
R20
±0.1
Material: Stainless
steel (SUS304)
E39-L43 E39-L44
16.2
8.7
1.2
3.4 R1
3.2 dia.
R1
R2
31.2
18
9
614
6
R25.4
±0.1
36
1.2
23.2
3.5 R3.5
3.2
20°
Material: Stainless
steel (SUS304)
E39-L51
E3A2
E3A-M
E3A3
OA-5, OA-5N
E3A2, OA-5N
E3A-M, OA-5
E3A3
58
70
45
35.5
37.5
Material: Iron
E39-L53
6.4
6.5 Two, 3 dia.
20 R3.2
R3.2
12
12.4
6 dia.
18 6
6.4
12.4 22
39.5
35
4.5
40±0.2
29.5
6.5
5
20
13.5
R2.25 4.5 dia.
1.6
54.5
Material: Iron
E39-L54V
Material: Stainless steel (SUS304)
0.5
4
4.5 8
23 15
4.1
4.1
E39-L69
Material: Stainless steel (SUS304)
3.1
16.5
10.7
3.1 16.5
10.7
7.2
7.2
7.2
3.1
7.2
3.2
3.1
1.2
3.2
520±0.2
5
30
20±0.2
E39-L/F39-L/E39-S/E39-R
7
E39-L70
3.1
7.2
16.5
16.5
10.7
7.2
3.1
7.2 7.2
11.4 3.1
31.7±0.1
3.1 2.05
2.05
10.7
7.2
2.05
3.1
1.2
16.3
16.3
20±0.2
20±0.2
41.7
Material: Stainless steel (SUS304)
1.8
17.6113.5 4.3
0.4
Two, R1.6
Six, R1.2
R1.6
3.2
3.2
10
2.8
E39-L83
Material: Stainless steel
9.8 15.6
31
16
2.6
4.2
4.2
4.2
4.2
9.2
12.9
8
8
28.9 32.2
15.1
1.5
15
3237
(44.7)
43.8
19
E39-L85
Material: Stainless steel (SUS304)
E39-L86
32.239
9.2
4.2
9.2 20
12
4.2
4.2
12.9
31
20
2.6
43.8
1.5 12.9
4.2
31
Material: Stainless steel (SUS304)
E39-L87
1.5
25
10
4.2
12.4
4.1
6.2 8.2
7.2
15
2.6
25.4 41
10
9.2 4.2
75.6
25.4
43.7
4.2
4.2
Material:
Stainless steel (SUS304)
8
E39-L/F39-L/E39-S/E39-R
35
59
6
30
54
183 188
215
8
26.3
20.9
12 dia.
26
50
22.5
45
48
48
15°
15°
Two, 6.6 dia.
E3Z
E39-L93FH
35
50
53
12
24
48
176 181
208
8
26.3
20.9
12 dia.
29
53
48
15°
15°
Two, 6.6 dia.
E3Z
E39-L93FV
59
8
10
30
54
184 189
216
8
26.3
20.9
12 dia.
48
15°
15°
27
34
14
45
32
Two, 6.6 dia.
E3Z
E39-L93H
32
46
49
10
20
44
176 181
208
8
26.3
20.9
12 dia.
24
48
48
15°
15°
Two, 6.6 dia.
8
15
E3Z
E39-L93V
E39-L/F39-L/E39-S/E39-R
9
40
213
38
26.3
20.9
8
170
11
15°15°
23 Pipe (B)
Holder (A)
15
24
48
189
197
165
22
12 dia.
8
12 dia.
E3Z
E39-L93XY
Note: The E39-L93XY consists of only the one joint holder
(A) and pipe, and the two hexagonal bolts and nuts. It
cannot be mounted to the Sensor alone.
E39-L94
4
20
2.3
3.2
3.2 dia.
1.2
5.8
19
±0.2
52
35
3.2
4.8
3.2
4
20
Two, R1.6
Four, R1.6
+0.2
0
Material: Iron
E39-L96
29.5
9.5
60
15.5 Center
of pole
brace
E39-R1 reflector
(order separately)
E39-L96
27
17.5°
17.5°
45°
4.3 dia.
45°
34.5
4.6
4.6
Two, M3 Tap processing
Material:
Stainless steel
(SUS304)
2-mm-thick
20
20
3
26
2
56
16
An attached
screw
20
20
44±0.2
Two, M6
34
13.5
56 dia.
30°30°
Stainless steel
(SUS 304)
Four, R3.3 Two, R22
(E3S-R)
E3S-R 16
2.6
50
15
E39-L97
Mounting Holes
56 dia.
Two, R22
4 6.5
(For E3S-B)
(For E3Z) (For E3S-R)
20
16
25
Four, R3.3
Two, R28
Stainless steel
(SUS 304)
44
±0.2
Two, M6 30°30°
25.4
An attached
screw
8.2
E3S-R
8
24
34
48
56
16 2
61
38.5
(A)*
* Mounting Bracket can be attached to side (A)
Mounting Holes
E39-L98
10
E39-L/F39-L/E39-S/E39-R
E39-L102
1.5
38.2
4.2
8.3
8.3
6.2
6.2
4.2
4.2
9.2
9.2
9.317.
3
4.2 12 20
25.4
±0.1
25.4
±0.1
Material:
Stainless steel (SUS304)
E39-L103 31
±0.1
31
±0.1
43.8
4.2
9.2
4.2
9.2
12 20
4.2
12 20
4.2
12.9
12.9
1.5
Material:
Stainless steel (SUS304)
E39-L104
R1
R1
R1.7 R1.7 3.4
5.8 12.5 (13.7)
4.5
6
29
3.4
R20
14°
Two, 3.2 dia.
3.5
16
R3.5
37.8
(39)
3.2
R25.4
10°
R1.6
8.8
1.2
Material:
Stainless steel
(SUS304)
E39-L109
Material:
Stainless steel
(SUS430)
4636
6
3.2 8.2 8.2
32.6
(14.7)
45.8
12
10.6
5.4
3.4
3.4
26
6
Two, M3
36
Mounting Holes
E39-L114
10
28
70
54
3
R28R28
50
5.2
5.2 8.4 33.2 Six, R2.6
15°
15°
R1
11
5.2
6.8 6.8
22
Material:
Stainless steel (SUS430)
E39-L115
58
7
26
100
21 35
Four, 5.5 dia.
37
33
515
42
11.5
Two,
M3 28
Material: Stainless steel (SUS304)
E39-L/F39-L/E39-S/E39-R
11
E39-L116
7.5
(17.8)
4.1 Two, 3.4
(Two, R2)
(Two, R2)
(Two, R1.1)
(Two, R1.2)
(Two, R1.7)
5
1.6
4
11
9.5
2.2
31.2
2.4
10
90°
1.2
R1.5 max.
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
Material:
Stainless steel (SUS304)
1.2-mm-thick
3.1
3.1
1811.5
11.2
3.4
4.5
Two, R2(Two, R1.7)
(Two, R1.7)
90°
R1
max.
2.4
(23) 15
9
4
9
Two, 2.2
5
510
(11.2)
(Two, R1.1)
(Two, R2)
1.2
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
E39-L117
Material:
Stainless steel (SUS304)
1.2-mm-thick
E39-L118
90°
90°
11.5
11.5
22.7
5
2.4
Two, 2.2
4
9
9
15
4.5 (Two, R1.7)
53.4 (Four, R2)
(Two, R1.1)
(23)
1811.5
3.1
3.1
1.2
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
Material:
Stainless steel (SUS304)
1.2-mm-thick
E39-L119
1216
90°
8
Four, M2 Tap processing
97
3.2
2.4
8
2.4
15
10.5
1.2
Material:
Stainless steel (SUS304)
1.2-mm-thick
1216
8
Four, M2 Tap processing
13.56
3.2
2.4
2.4
8
14
22.5
4.2
(5.4)
1.2
E39-L120
Material: Stainless steel (SUS304)
1.2-mm-thick
E39-L127-T1
E39-L127-T2
E39-L127-T3
4
A
20
Two, 5 dia.
A+24
5.6
Four, M2.3
(Mounting sensor
screws)
2.3
7.5
12
5.6
1.6
20
Four, 3.2 dia.
(Mounting
bracket holes)
10
30
15
9
Material: Iron
Model Dimension A (mm)
E39-L127-T1 10
E39-L127-T2 20
E39-L127-T3 30
12
E39-L/F39-L/E39-S/E39-R
E39-L131
11.5
22
1.5
Two, R3.2
15°
R34
5.5
23.5
6.4
2-R3.2
45
25
±0.1
35
25
±0.1
65.5
Two,
4.2 dia.
Four, R2.1
4.2
R25
Four, R1
4.2
R25
23.5
35.5
8.5
90°
±1°
6.4
Material:
Stainless steel (SUS304)
E39-L132
1.5 90°
±1°
11.5
22
6.4
Two, R3.2 15°
R34
4.2 dia.
25
±0.1
4.4
10
Two, R2.2
5.5
23.5
11.5
8.5
4
5
23.5
6.4 Two, R3.2
Material: Stainless steel (SUS304)
E39-L135
48
Two, 4.2 dia.
58
74±0.1
118 123
54.62
37±0.1
10°
Four, R2.1
2-4.2
R82.8
6.4 Two, R3.2
32 7
18°
R44
28
15
6.4
Two, R3.2
2
90°±1°
Material:
Stainless steel (SUS304)
E39-L136
5°
Eight, 4.2
Fourteen,
R2.1
R82.7
R82.7
R82.7
85 74
5.5
5°
2°
5°
5°
2°
88
90
83
74
72
37
6.4
32
20.5
18°
R44
2
28
15
6.4 Two,
R3.2
Two,
R3.2
90°
±1
Material: Stainless steel (SUS304)
E39-L142
37
55
12
4.5
R12
14°
5
4
7.8
4.5
7
4.5 15.3
25.4
1.5
15.8 22 7
8.7
14
14 Four, 3.4-dia. hole
s
Material: Stainless steel (SUS304)
Material: Stainless steel (SUS304)
(10.3)
7
3.4
1
3163
710.3
7.3
5.3
2.5
34.8
22
16
26.8
3
3.4
1
Two, 3.2 dia.
Four, R1.7
10 max.
E39-L143
E39-L/F39-L/E39-S/E39-R
13
Contact Mounting Plate
E39-L144
38.5
7.3
25.4 Two, R25.4
1.5
14.2
25
Four, R1.6
Two, 50°
Two, R17
23
21
3.5
Four, R1.6
5°
Material: Stainless steel (SUS304)
E39-L148
12
1.5
9.1
12 max. 9 3.4
2
R1.7
R1.7
2
16
27
3
4
3
4.3
Two, 3.2 dia.
7.3
35
22
3.4
16
9.5
Material: Stainless steel (SUS304)
52
4513.6
5.5
24
4.5
1942.5
1
40.5
10.5
Four, R3
Four, 4.5 dia.
E39-L149 E39-L150
E39-L151
Model L
E39-L150 65
E39-L151 165
Length (mm)
34 32 19
46
L
35
21
Two, 6.5 dia.
10 dia.
Two, 3.5 dia.
5.4
5.5
4.5
22.7
6.8
20
14
Two, 3.5
Stainless steel
(SUS 304)
Polybutylene
terephthalate
Polybutylene
terephthalate
8
E39-L153 14
8
22
10
41
25.4
Four, 3.5
3.5
4-3
Eight, R1.75
4
7
7
3.5
4
Two, R1.75
1.2
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-L60
(33) 11.75
2.5
3.4 dia.
3.4 dia.
20
6.5
11.75
5
5
2.5
6.5
Material: PBT (polybutylene terephthalate)
14
E39-L/F39-L/E39-S/E39-R
Reflector dimensions (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-R1
E39-R1S
E39-R1K *
34
40.3
5259.9
2.7
8
1.6
7.5
7
Two, 3.5 dia.
Material,
reflective surface: acrylic
Rear surface: ABS
* E39-R1K only
Coating on reflective surface
E39-R2
Material,
reflective surface: acrylic
Rear surface: ABS
74.5
80.8
5259.9
2.7
1.6 7
6.5 34
7.5
7
8
7
Four, 3.5 dia.
E39-R9
42.3
30.9 × 30.9
15
25
35.4
8
3.5
5.5
8
(21)
4
Two,
3.6 dia.
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R10
30
47 × 47
Two,
4 dia.
10
(30.4)
5
61.4
40
51.6
3.5
5.5
8
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R3
29
4.5 6
R20
3.4
7
18.45
22.9
11
20 0.2
0.2
16
22.5
19.3
34
3834.8
Two,
M3
41.8
10.1 1.2
25.4 R25.4
3.2
10°
1.2
2.6
Stainless
steel
(SUS304)
Adhesive tape side
Two, 3.2 dia.
13.7
14°
3.4
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R4
13.7
9.7
2
4
23 19
Two, 2.2 dia. 1.4
4.9
4
2
Material,
reflective surface: acrylic
Rear surface: ABS
4060
34
40
52
3.5
3.5
4.8
E39-R6
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R37-CA
10.2
8.7 (1.1)
13.7 13.7 Eight, R1
18.323 18.3 23
Two, R1.55
Mounting
Bracket: t 0.5
Two, 3.1 dia.
Reflector: t0.5
(adhesive tape side)
Reflector
Mounting bracket
Note: The reflective plate and mounting plate (1) come as a set.
Reflectors only for E3T-SR4@.
Material:
Mounting plate: stainless steel (SUS301)
Reflective surface: acrylic
Retroreflector for E3ZM-B
E39-RP1
72 63.680
44
Two, 3.5 dia.
Reflector
3
8.5
0.2
E39-L/F39-L/E39-S/E39-R
15
* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@.
Sensitivity Adjuster
Sensitivity Adjustment Driver
E39-RS1
E39-RS1-CA *
35
Four, R1 Adhesive
tape side
0.5
10
Material: Acrylics
E39-RS3
E39-RS3-CA *
Material: Acrylics
80
Four, R1
70
0.5
Adhesive
ta
p
e side
E39-RS2
E39-RS2-CA *
Material: Acrylics Four, R1
40 0.5
35
Adhesive
tape side
37
7.3R
23
7.3R
15
30
23
45
5.5
2.9
Two, 3.4 dia.
Four, R1.4
Four, R3
1.6
24
17.2
4
7
2.3R
2.3R
712
6
Two, 3.4 dia.
Four, R2
Four, R1
E39-R12/R14 E39-R13
195
22
0.4
Adhesive
tape side
108
46
0.4
Adhesive
tape side
E39-RS4 E39-RS5
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-
G
1
Material: Polycarbonate
4
9.3 dia.13 dia.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-
G
2
8 dia.
7 dia.
0.8 1
(12.6)
Material: Polycarbonate
16
E39-L/F39-L/E39-S/E39-R
Connection Sockets
Lens Unit (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-F1V
8.9
0.5-dia. hole
6M2.6 × 0.45
Effective depth: 3.8
Countersunk with straight edge,
depth: 0.9
4 dia.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Front
C
onnection
S
ocket
PF113A 4
31 max.
35.4
722
Eleven, M3.5 × 7
Sems screw
23.5
43 max.
34 45
4
52 max.
34±0.2
Two, M4 or 4.5 dia.
101112
8
9
765
4
3
Mounting Holes
Terminal arrangement/Inter-
nal connections (top view)
Note: Rail mounting also possible.
Front
C
onnection
S
ocket
PYF08A Two, M3 or M
or 4.5 dia.
59±0.3
6
4
35.4
3.4
16.5
23 max.
30 max.
15±0.2
72 max.
6Eight, M3 × 8
Sems screw
Two, 4.2 × 5 mounting holes
1
5
9
12
14 13
8
4
Mounting Holes
Terminal arrangement/Inter-
nal connections (top view)
Note: Rail mounting also possible.
5.8
13.2
12.65
4.1
6.35
4.2
25.8±0.2
21.4+0.2
0
Eight, 1.3 dia. holes
6.4
29.5 max.
25.5 max.
2.6
24 max.
20 max.
7.7
Eight, 3 × 1.2 ellipse hole
2.7
9
13 14
12
8
41
5
Front Connection Socket
PY08
Terminal arrangement/Internal
connections (bottom view) Mounting Holes
PCB Cutout Dimensions
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2012.4
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2012 All Right Reserved.