Series 732 DPDT Non-Latching Commercial Electromechanical Relay COMMERCIAL SENSITIVE TO-5 RELAYS DPDT SERIES RELAY TYPE 732 DPDT basic relay 732D DPDT relay with internal diode for coil transient suppression 732TN DPDT relay with internal transistor driver and coil transient suppression diode DESCRIPTION The TO-5 relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to 1 ampere. Designed for high-density PC board mounting, the Series 732 relays are some of the most versatile ultraminiature relays available because of their small size and low coil power dissipation. The following unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability: * Advanced cleaning techniques provide maximum assurance of internal cleanliness. * Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. The Series 732D relay has an internal discrete silicon diode for coil transient suppression. The hybrid Series 732TN relay has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PC board floor space requirements as well as component installation costs. By virtue of its inherently low intercontact capacitance and contact circuit losses, the 732 has proven to be excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the TO-5 relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching The 732 feature: *All welded construction. * Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. * High force/mass ratios for resistance to shock and vibration. Part Numbering System 732 Y M4 - 26 / S Q Q = Solder-Coated Leads1 G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder2 Relay Series Ground Pin Option (See Appendix) Pad Option (See Appendix) S = 0.187" Leads No Suffix = 0.75" Leads Nominal Coil Voltage (26 = 26.5 V, See Page 2 for more Voltages) ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Operating) -55C to +85C Vibration (General Note I) 10 g's to 500 Hz Shock (General Note I) 30 g's, 6ms half sine Enclosure Hermetically sealed Weight 0.09 oz. (2.55g) max. (c) 2018 TELEDYNE RELAYS INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT UNI-FRAME ARMATURE LOWER STATIONARY CONTACT (800) 284-7007 * www.teledynerelays.com MOVING CONTACT 732 Page 1 732\082018\Q3 Series 732 DPDT Non-Latching Commercial Electromechanical Relay SERIES 732 GENERAL ELECTRICAL SPECIFICATIONS (@25C) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.15 max.; 0.25 max. afterlife at A / 28 Vdc Contact Load Rating (DC) Resistive: Inductive: Lamp: Low level: 1 A/ 28 Vdc 200 mA/ 28 Vdc (320mH) 100 mA / 28 Vdc (320mH) 10 to 50 A @ 10 to 50 mV Contact Load Rating (AC) Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded) 100 mA / 115 Vac, 60 and 400 Hz (Case grounded) Contact Life Ratings 10,000,000 cycles (typical) at low level 1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Coil Operating Power 200 mW typical at nominal rated voltage Contact Carry Rating Contact Factory Operate Time 6.0 msec max. at nominal rated coil voltage Release Time 732: 3.0 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 1,000 M min. between mutually isolated terminals Dielectric Strength 350 Vrms (60 Hz) @ atmospheric pressure Negative Coil Transient (Vdc) 2.0 Vdc Max. Diode P.I.V. (Vdc) 60 Vdc Min. 732TN Transistor Characteristics 732D, 732TN: 7.5 ms max. Base Voltage to Turn Off (Vdc) 0.3 min Emitter-Base breakdown Voltage (BVEBO) (Vdc) 6.0 min Collector-Base breakdown Voltage (BVCBO) (Vdc) 60 min DETAILED ELECTRICAL SPECIFICATIONS (@25C) BASE PART NUMBERS (732, 732D, 732TN) 732-5 732D-5 732TN-5 732-6 732D-6 732TN-6 732-9 732D-9 732TN-9 732-12 732D-12 732TN-12 732-18 732D-18 732TN-18 732-26 732D-26 732TN-26 5.0 6.0 9.0 12.0 18.0 26.5 Nom. Coil Voltage 7.5 10.0 15.0 20.0 30.0 40.0 Coil Resistance (Ohms 20%) 100 200 400 850 1600 3300 Pick-up Voltage (Vdc, Max.) Pulse Operation 3.5 4.5 6.8 9.0 13.5 18.0 732TN Base Current to Turn On (mAdc, min.) 1.5 1.00 0.75 0.47 0.38 0.24 Max. GENERAL NOTES 1. Relay contacts will exhibit no chatter in excess of 10 sec or transfer in excess of 1 sec. 2. "Typical" characteristics are based on available data and are best estimates. No on-going verification tests are performed. 3. Unless otherwise specified, parameters are initial values. 4. Relays can be supplied with a spacer pad. See appendix. PERFORMANCE CURVES (Note 2) TYPICAL DC CONTACT RATING (RESISTIVE) TYPICAL RF PERFORMANCE INSE 10 20 30 40 50 60 70 LOSS 300 1.92 SS 1.22 RN LO RETU TS C A 1.07 NT S CO ROS 1.02 C A N LES O IO P T S A S 1.01 ISOL ACRO TION ISOLA 1.00 1.00 0.5 .1 .5 1.0 R) (VSW .01 732 Page 2 LOAD VOLTAGE (VDC) RTIO N VSWR dB 0 .1 .2 .3 .4 250 200 150 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) LOAD CURRENT (AMPS DC) FIGURE 1 FIGURE 2 0.8 0.9 1.0 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (c) 2018 TELEDYNE RELAYS 732\082018\Q3 Series 732 DPDT Non-Latching Commercial Electromechanical Relay SERIES 732 OUTLINE DIMENSIONS CASE DETAIL .370 (9.40) DIA. MAX. TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY) (Viewed from Terminals) .335 (8.51) DIA. MAX. 75$16,6725%$6( &211(&7,21)25 7121/< .385 (9.76) MAX. WIRE LEAD: .75 (19.05) MIN. ',$ (.05) .017 (.43) +.002 -.001 (.03) DIA. 7<3 (Viewed From Terminals) SCHEMATIC DIAGRAMS 9 9 1 8 2 3 7 4 6 1 0 1 8 2 7 3 6 732 4 9 8 7 1 2 3 6 732D 4 732TN NOTES: 1. RELAY CONTACTS WILL EXHIBIT NO CHATTER IN EXCESS OF 10 SEC OR TRANSFER IN EXCESS OF 1 SEC. 2. "TYPICAL" CHARACTERISTICS ARE BASED ON AVAILABLE DATA AND ARE BEST ESTIMATES. NO ON-GOING VERIFICATION TESTS ARE PERFORMED. 3. UNLESS OTHERWISE SPECIFIED, PARAMETERS ARE INTIAL VALUES. 4. FOR REFERENCE ONLY. COIL RESISTANCE NOT DIRECTLY MEASURABLE ON 732TN RELAYS. 5. CIRCUIT IS TYPICAL FOR ALL SERIES 732TN. VALUES SHOWN ARE FOR 732TN-5 RELAY AND APPLY FOR FULL TEMPERATURE RANGE.LIMIT BASE-EMITTER CURRENT TO 15 MADC. 6. UNLESS OTHERWISE SPECIFIED, RELAYS WILL BE SUPPLIED WITH EITHER GOLD-PLATED OR SOLDER-COATED LEADS. 7. THE SLASH AND CHARACTERS APPEARING AFTER THE SLASH ARE NOT MARKED ON THE RELAY. TYPICAL LOGIC INTERFACE (See Note 5) Vcc Vr Pin 1 Notes: Logic 1 activates the relay. Logic 0 de-activates the relay. Vcc = logic bias power. Vr = coil energization voltage. Logic element Pin 10 1 = 0.50 to 3.00mA 0 = 0.3Vdc min. (c) 2018 TELEDYNE RELAYS Pin 9 (800) 284-7007 * www.teledynerelays.com 732 Page 3 732\082018\Q3 APPENDIX: Spacer Pads Pad designation and bottom view dimensions Height O.150 [3.81] (REF) Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for Centigrid(R) .156 [3.96] (REF) Dim H MAX .256 [6.5] (REF) "M9" Pad for Centigrid(R) For use with the following: Dim. H Max. ER412, ER412D, ER412DD .295 (7.49) 712, 712D, 712TN, RF300, RF310, RF320 RF700, RF703 .300 (7.62) ER420, ER420D, ER420DD, 421, ER421D, ER421DD, ER422, ER422D, ER422DD, 722, 722D, RF341 .305 (7.75) ER431T, ER432T, ER432, ER432D, ER432DD .400 (10.16) 732, 732D, 732TN, RF303, RF313, RF323 .410 (10.41) RF312, RF332 SI800, SI803 .350 (8.89) ER411, ER411D, ER411DD, ER411T .295 (7.49) ER431, ER431D, ER431DD .400 (10.16) RF311 .300 (7.62) RF331 .410 (10.41) 172, 172D .305 (7.75) ER114, ER114D, ER114DD, J114, J114D, J114DD .300 (7.62) ER134, ER134D, ER134DD, J134, J134D, J134DD .400 (10.16) RF100 .315 (8.00) RF103 .420 (10.67) 122C, A152 .320 (8.13) ER116C, J116C .300 (7.62) ER136C, J136C .400 (10.16) RF180 .325 (8.25) A150 .305 (7.75) Notes: 1. Spacer pad material: Polyester film. 2. To specify an "M4" or "M9" spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specified, tolerance is .010" (.25 mm). 5. Add 10 m to the contact resistance shown in the datasheet. 6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. Page 4 (800) 284-7007 * www.teledynerelays.com * +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2016 TELEDYNE RELAYS APPENDIX: Spreader Pads Pad designation and bottom view dimensions Height For use with the following: .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .300 [7.62] .150 [3.81] .014 [0.36] (REF) .100 [2.54] .370 [9.4] MIN .200 [5.08] "M" Pad 5/ 6/ .390 [9.91] SQ .100 [2.54] .150 [3.81] .300 [7.62] .300 [7.62] .150 [3.81] Dim H MAX .130 [3.3] "M2" Pad 7/ 8/ .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .300 [7.62] .150 [3.81] .014 [0.36] (REF) .100 [2.54] .200 [5.08] "M3" Pad 5/ 6/ 9/ ER411T, J411T, ER412, ER412D ER412DD, J412, J412D, J412DD ER412T, J412T .388 (9.86) 712, 712D, 712TN .393 (9.99) ER431T, J431T, ER432, ER432D ER432DD, J432, J432D, J432DD ER432T, J432T .493 (12.52) 732, 732D, 732TN .503 (12.78) ER420, J420, ER420D, J420D ER420DD, J420DD, ER421, J421 ER421D, J421D, ER421DD J422D, ER422DD, J422DD, 722 .398 (10.11) ER411T ER412, ER412D, ER412DD J412, J412D, J412DD .100 [2.54] .370 [9.4] MIN Dim. H Max. .441 (11.20) 712, 712D .451 (11.46) ER421, ER421D, ER421DD 722, 732D .451 (11.46) ER431T ER432, ER432D, ER432DD .546 (13.87) 732, 732D .556 (14.12) ER411, ER411D, ER411DD, ER411TX ER412X, ER412DX, ER412DDX ER412TX .388 (9.86) 712X, 712DX, 712TNX .393 (9.99) ER420X, ER420DX, ER420DDX ER421X, ER421DX, ER421DDX ER422X, ER422DX ER422DDX, 722X, 722DDX .398 (10.11) ER431, ER431D, ER431DD ER431TX ER432X, ER432DX, ER432DDX ER432TX .493 (12.52) 732X, 732DX, 732TNX .503 (12.78) Notes: 1. Spreader pad material: Diallyl Phthalate. 2. To specify an "M", "M2" or "M3" spreader pad, refer to the mounting variants portion of the part number example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specified, tolerance is .010" (0.25 mm). 5/. Add 25 m to the contact resistance shown in the datasheet. 6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. 7/. Add 50 m to the contact resistance shown in the datasheet. 8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet. 9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.) (c) 2016 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 5 APPENDIX: Ground Pin Positions O.200 [O5.08] 363 "Z" "Z" POSITION "X" POSITION "Y" POSITION O.200 [O5.08] "Y" 453 TO-5 Relays: TO-5 Relays: ER411T, ER412, ER412T, ER420, ER421, ER422, ER431T, ER432, ER432T, 712, 712TN, 400H, 400K, 400V, RF300, RF303, RF341, RF312, RF332, RF310, RF313, RF320, RF323, SI800, SI803, RF700, RF703 ER411, ER431, RF311, RF331 "Y" POSITION .100 [2.54] .050 [1.27] POSITION "Y" POSITION "Z" POSITION .100 [2.54] .100 [2.54] "W" POSITION POSITION "Z" POSITION "X" POSITION .100 [2.54] .100 [2.54] "U" POSITION (ER116C and ER136C only) .100 [2.54] Centigrid(R) Relays: Centigrid(R) Relays: RF100, RF103, ER114, ER134, 172 RF180, ER116C, 122C, ER136C "Z" Position Loopback Relays: LB363 "Y" Position Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type Page 6 NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: .010 (.25) unless otherwise specified 4. Ground pin positions are within .015 (0.38) dia. of true position 5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref. 6. Lead dia. 0.017 (0.43) nom. (800) 284-7007 * www.teledynerelays.com * +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2016 TELEDYNE RELAYS