EE-1006T - OMRON - Product.Network

CSM_EE-SPX303_403_DS_E_3_1

Slot-type Photomicrosensor with Cable

EE-SPX303/403

Long sensing distance (13 mm)

without external light interference.

• Easy adjustment and optical axis monitoring with a light indicator.

• Connection possible with Programmable Controllers (PLCs).

• Easy-to-wire connector assures ease of maintenance.

• Wide operating voltage range: 12 to 24 VDC

Be sure to read Safety Precautions on

page 3.

Ordering Information

Sensors

Accessories (Order Separately)

* Refer to Accessories for details.

Appearance Sensing method Sensing distance

(slot width) Output type Output

configuration Model

Through-beam type

(with slot) NPN output

Dark-ON EE-SPX303

Light-ON EE-SPX403

Type Cable length Model

Connector EE-1001

EE-1009

Connector with

Cable

1 m EE-1006

EE-1010

2 m EE-1006

EE-1010

Connector with

Robot Cable

1 m EE-1010-R

2 m EE-1010-R

NPN/PNP Conversion Connector 0.46 m (total length) EE-2002

Infrared li

13 mm

(slot width)

EE-SPX303/403

Ratings and Specifications

Engineering Data (Typical)

Sensing Position Characteristics

EE-SPX303

Item Models EE-SPX303, EE-SPX403

Sensing distance 13 mm (slot width)

Sensing object Opaque: 2.2 × 0.5 mm min.

Differential distance 0.05 mm max.

Light source GaAs infrared LED (pulse lighting) with a peak wavelength of

940 nm

Indicator *1Light indicator (red)

Supply voltage 12 to 24 VDC ±10%, ripple (p-p): 5% max.

Current consumption Average: 15 mA max., Peak: 50 mA max.

Control output

NPN voltage output:

Load power supply voltage: 12 to 24 VDC

Load current: 80 mA max.

OFF current: 0.5 mA max.

80 mA load current with a residual voltage of 1.0 V max.

10 mA load current with a residual voltage of 0.4 V max.

Response frequency *2100 Hz min.

Ambient illumination 3,000 lx max. with incandescent light or sunlight on the surface of

the receiver.

Ambient temperature

range

Operating: −10 to +55°C

Storage: −25 to +65°C

Ambient humidity range Operating: 5% to 85%

Storage: 5% to 95%

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each

in X, Y, and Z directions

Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC IP50

Connecting method Special connector (soldering not possible)

Weight Approx. 3 g

Material Polycarbonate

*1. The indicator is a GaP red LED

(peak wavelength: 700 nm).

*2. The response frequency was measured by

detecting the following rotating disk.

2 mm

Disk

2 mm

0 1 2 3 4 5 6

Distance d

(

)

Tr ON

Tr OFF

Dark-ON

0 1 2 3 4 5 6

Distance d

(

)

Tr ON

Tr OFF

Dark-ON

EE-SPX303/403

I/O Circuit Diagrams

NPN Output

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

Make sure that this product is used within the rated ambient

environment conditions.

● Wiring

•Connection is made using a connector. Do not solder to the pins

(leads). The pins (leads) are soldered to the internal board of the

Sensor. Therefore, direct soldering of the pins (leads) may result in

an internal disconnection causing malfunction.

•When extending the cable, use an extension cable with conductors

having a total cross-section area of 0.3 mm2. The total cable length

must be 2 m maximum.

•To use a cable length longer than 2 m, attach a capacitor with a

capacitance of approximately 10 µF to the wires as shown below.

The distance between the terminal and the capacitor must be within

2 m. (Use a capacitor with a dielectric strength that is at least twice

the Sensor's power supply voltage.)

•Make sure the total length of the power cable connected to the

product is less than 10 m even if a capacitor is inserted.

Model Output

configuration Timing charts Output circuit

EE-SPX403 Light-ON

EE-SPX303 Dark-ON

Incident

Interrupted

OFF

Operates

Releases

Light indicator

(red)

Output

transistor

Load 1

(relay)

Load 2

Light indicator (red)

1.5 to

3 mA Load 1

Load 2

Main

circuit

OUT

∗

* Volta

e out

(

when the sensor is connected to a transistor circuit

)

12 to 24 VDC

Incident

Interrupted

OFF

Operates

Releases

Light indicator

(red)

Output

transistor

Load 1

(relay)

Load 2

WARNING Precautions for Correct Use

OUT

Extension cabl

A capacitance of

10 µF min.

−

12 to 24 VDC

0 V

2 m max.

EE-SPX303/403

(Unit: mm)

Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Sensors

Accessories (Order Separately)

*Refer to Accessories for details.

13 7.4 0.2

3.2

Four, R1.6

2-3.7

5.08

19.5

2.54 0.7 0.3

Indicator window

321

Sensing window

0.5 × 2.2

EE-SPX303, EE-SPX403

Terminal Arrangement

(1) +Vcc

(2) OUT OUTPUT

(3) −GND (0 V)

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2008.10

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/