1218 Reader's Spreads 6/19/02 3:46 PM Page 73 CCP chip fuse features * * * * * * * Immediate cut-off of excessive heat No generation of heat UL94V-0 epoxy case Suitable for flow and reflow soldering UL 198G approved, file #131375 One-time fuse device Marking: Black body color with yellow marking circuit protection dimensions and construction L Size Code W 2B h 2E t L W Dimensions inches (mm) t h .063.008 .047.008 .031.004 .126.008 (1.60.2) (1.20.2) (0.80.1) (3.20.2) .098.008 .087.008 .075.004 (2.50.2) (2.20.2) (1.90.1) e d .047.004 .024.004 (1.20.1) (0.60.1) .067.004 .02.004 (1.70.1) (0.50.1) Electrode e Molded Resin d Buffer Fuse Element ordering information Old Part # New Part # CCP 2E 20 T Type Size Rating Packaging CCP 2B 20 Type Size Code Rating 2B: 1206 2E: 1210 Reference rating chart T Termination Material T: Sn TE Packaging TE: 7" embossed plastic (2B - 3,000 pieces/reel) (2E - 2,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 74 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 1218 Reader's Spreads 6/19/02 3:46 PM Page 74 PMS 300 neg. Black neg. CCP chip fuse applications and ratings Current Rating Fusing Current CCP2B15 CCP2B20 CCP2B25 CCP2B30 CCP2B35 CCP2B40 CCP2B50 CCP2B63 CCP2E10 CCP2E13 CCP2E15 CCP2E20 CCP2E25 CCP2E30 CCP2E35 CCP2E38 CCP2E40 CCP2E45 CCP2E50 CCP2E63 0.75A 1.00A 1.25A 1.50A 1.75A 2.00A 2.50A 3.15A 0.4A 0.52A 0.6A 0.8A 1.0A 1.2A 1.4A 1.5A 1.6A 1.8A 2.0A 2.5A 1.5A 2.0A 2.5A 3.0A 3.5A 4.0A 5.0A 6.3A 1.0A 1.3A 1.5A 2.0A 2.5A 3.0A 3.5A 3.8A 4.0A 4.5A 5.0A 6.25A Fusing Time Internal R. Maximum (m) 1 second max. @ fusing current 150 100 75 60 50 45 35 23 200 170 150 100 75 60 50 48 45 40 35 23 Maximum Open Circuit Voltage Rated Ambient Temperature Operating Temperature Range +70C -40C to +125C 24V circuit protection Part Designation 72V environmental applications Derating Curve Fusing Characteristics CCP2B 100 15 20 25 30 35 40 50 10 CCP2E 63 101315 20 25 30 35 38 40 45 50 10 63 60 40 20 0 -40 -20 0 20 80 100 120 140 160 180 70 125 175 Ambient Temperature (C) 40 60 Fusing Time (Sec.) Fusing Time (Sec.) % Rated Power 80 1 .1 .01 .001 0 1 2 3 4 5 6 7 8 1 .1 .01 .001 0 1 2 Fusing Current (A) 3 4 5 6 7 Fusing Current (A) Performance Characteristics Parameter Clearing Time Requirement Within 1 second Open Circuit Voltage No fusing, flaming, explosion Residual Resistance Over 10k No breakdown of termination and disconnection R: 10% 95% coverage minimum R: 10% R: 10% R: 10% No aberration of marking in appearance Bending Test Resistance to Solder Heat Solderability Load Life Moisture Resistance Temperature Cycling Resistance to Solvent Test Method CCP2E, CCP2B: 250% of rated current shall be carried Apply DC voltage between the termination after fusing CCP2B: 24V, CCP2E: 72V Measuring DC resistance after fusing Holding point: 90mm, Bending: 10mm, 1 time 260C 5C, 0.5 seconds, 2 cycles 230C 5C, 3 seconds 0.5 seconds 70C 3C, 1000 hours, rated current 40C 2C, 90% RH, rated current -40C (30 minutes)/+125C (30 minutes), 10 cycles Conforming to MIL-STD-202F Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 75 8