Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2015. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 16 SAW/FBAR DEVICES for MOBILE COMMUNICATIONS SAW/FBAR DEVICES for MOBILE COMMUNICATIONS REFLOW REFLOW PARTS NUMBER (A) Previous Rule (applied products registered on March 31, 2010 or before.) F A R D 6 N F 1 G 9 6 0 0 P 1 Family Package code Common sign Product code B Z Z Common sign Product Duplexer Duplexer Dual Duplexers Device Device Dual Devices Dual Devices Frequency RangeMH 700 - 1000 1000 - 5000 700 - 1000 700 - 1000 1000 - 5000 700 - 1000 1000 - 5000 Frequency Common sign Internal code Internal code Custom code HIGH FREQUENCY PRODUCTS Series name Code D5 D6 J5 F5 F6 G5 G6 Packaging (B) New Rule (applied to products registered on April 1, 2010 or later.) D 6 N F 1 G 9 6 0 0 P 1 B Z Series name Code Product Frequency RangeMH D5 Duplexer 700 - 1000 D6 Duplexer 1000 - 5000 J5 Dual Duplexers 700 - 1000 F5 Device 700 - 1000 F6 Device 1000 - 5000 G5 Dual Devices 700 - 1000 G6 Dual Devices 1000 - 5000 *For further details, please contact to TAIYO YUDEN CO., LTD. Z Package code Product code Frequency Internal code Internal code Custom code Packaging EXTERNAL DIMENSIONS 2.5x2.0x0.6 (9pin) 2.0x1.6x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.8x1.4x0.5 1.5x1.1x0.5 sawfilter_e-E04R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 16 151 PARTS NUMBER Duplexers System W-CDMA Band 1 PCS/W-CDMA Band 2 W-CDMA Band 4 CDMA/W-CDMA Band 5 LTE Band 7 W-CDMA Band 8 HIGH FREQUENCY PRODUCTS LTE Band 12 LTE Band 13 LTE Band 13+17 Triplexer LTE Band 17 LTE Band 21 LTE Band 25 LTE Band 26 LTE Band 28 CDMA BC0+BC10 CDMA/GSM850/Band 5 System CDMA Tx CDMA/GSM850 Tx CDMA/W-CDMA Band 5 Rx GSM850/CDMA Rx GSM850 Rx CDMA2000 BC0+BC10 System CDMA2000 BC0+10 Tx CDMA2000 BC0+10 Rx GSM/EGSM/Band 8 System EGSM Tx EGSM Rx W-CDMA/LTE Band 8 Part number D6PE2G140P3AW D6DA2G140K2A4 D6RB2G140E1AJ D6RB2G140E1AL D6PF1G960M3B6 D6PF1G960M3B9 D6PE1G960P3BY D6PE1G960P3BP D6RB1G960E1HB D6DA2G132K2D4 D6PE2G132P3DWB D6RB2G132E1DF FAR-D5PF-881M50-M3E7 FAR-D5PF-881M50-M3E9 FAR-D5PE-881M50-P3EZ FAR-D5PE-881M50-P3EY D5DA881M5K2E4 D5RB881M5E1BH D6HL2G655DL06 D6HN2G655BN54 D5PF942M5M3G6 D5PF942M5M3G9 D5DA942M5K2G6 D5PE942M5P3GT D5RB942M5E1CF D5DA737M5K2H2 D5PE782M0M3P9 D5DA782M0K2J6 J5NA782M0P1H6 D5PF740M0M3R9 D5PE740M0P3NZ D6PE1G503P3KW D6HL1G962DL39 D5PF876M5M3U9 D5PE876M5P3UZ D5PF773M0M3Y6 D5PF788M0M3Y9 D5PE878M0P3UT Package Sizemm Insertion LossdB 2.0x1.6x0.5 1.5/1.6 1.8x1.4x0.5 1.8/1.8 1.8x1.4x0.5 1.7/1.8 1.8x1.4x0.44 1.7/1.8 2.0x1.6x0.57 2.2/2.7 2.0x1.6x0.57 2.2/2.7 2.0x1.6x0.57 2.0/3.1 2.0x1.6x0.57 2.3/3.0 1.8x1.4x0.6 2.1/2.9 1.8x1.4x0.5 1.5/1.7 2.0x1.6x0.5 1.8/1.8 1.8x1.4x0.5 1.6/1.8 2.0x1.6x0.5 1.5/1.8 2.0x1.6x0.5 1.5/1.8 2.0x1.6x0.5 1.4/1.7 2.0x1.6x0.5 1.4/1.7 1.8x1.4x0.5 1.4/1.7 1.8x1.4x0.47 1.4/1.7 2.0x1.6x0.54 2.1/2.3 2.0x1.6x0.54 1.8/2.6 2.0x1.6x0.5 2.1/2.1 2.0x1.6x0.5 1.9/2.2 1.8x1.4x0.5 1.7/1.8 2.0x1.6x0.5 1.7/2.2 1.8x1.4x0.5 1.5/1.9 1.8x1.4x0.5 1.65/1.65 2.0x1.6x0.5 1.6/2.0 1.8x1.4x0.5 1.65/1.65 2.5x2.0x0.6 1.6/1.9 2.0x1.6x0.5 1.6/1.8 2.0x1.6x0.5 1.9/2.0 2.0x1.6x0.5 1.6/2.0 2.0x1.6x0.57 2.4/2.9 2.0x1.6x0.5 2.0/1.9 2.0x1.6x0.5 2.2/2.6 2.0x1.6x0.5 1.8/2.3 2.0x1.6x0.5 1.8/2.4 2.0x1.6x0.5 1.9/2.2 IsolationdB 59/47 56/51 57/48 57/51 55/52 57/52 57/53 56/52 56/55 57/55 55/50 62/54 58/51 58/51 59/52 59/52 58/59 58/52 53/57 55/42 57/55 60/52 58/59 58/54 56/51 63/58 53/64 63/58 60/53 50/50 63/60 55/56 56/56 50/50 60/49 60/53 60/54 59/51 Remarks 9 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 8 Pin B Type 9 Pin, B Type Rx : Bal.100ohm 8 Pin B Type Rx : Bal.100ohm 9 Pin, A Type 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, A Type Rx : Bal.100ohm 8 Pin, B Type 8 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type FBAR 9 Pin, B Type Bal.100ohm, FBAR WLAN coexistence Ver. 9 Pin, B Type for LTE 9 Pin, B Type 8 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type 9 Pin, B Type 8 Pin, B Type 9 Pin, B Type 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type FBAR 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm Block A 9Pin, B Type Block B 9Pin, B Type 9 Pin, B Type Rx : Bal.100ohm Part number FAR-F5KB-836M50-B4ER FAR-F5KB-836M50-B4EG F5QA836M5M2AR FAR-F5KA-836M50-D4DF FAR-F5KB-881M50-B4ED FAR-F5KY-881M50-B4UZ FAR-F5KB-881M50-B4EJ FAR-F5QB-881M50-P2BG F5QG881M5P2KG FAR-F5KA-881M50-D4DB FAR-F5QA-881M50-M2AF F5QA881M5M2AU FAR-F5KB-881M50-B4EA FAR-F5QB-881M50-P2BA Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 1.7 44 100ohm input 1.4x1.0x0.5 1.6 42 200ohm input 1.1x0.9x0.5 1.9 45 High Att. 1.4x1.0x0.5 1.9 44 High Att. 1.4x1.0x0.5 1.5 61 100ohm output 1.4x1.0x0.5 1.5 61 100ohm, High Att. 1.4x1.0x0.5 1.4 64 200ohm output 1.1x0.9x0.5 1.5 60 100ohm output 1.1x0.9x0.5 1.5 56 100ohm, High Att., Low Loss 1.4x1.0x0.5 1.7 56 High Att. 1.1x0.9x0.5 1.6 46 1.1x0.9x0.5 1.3 51 Low Loss/high Att. 1.4x1.0x0.5 1.7 53 150ohm output 1.1x0.9x0.5 1.3 63 150ohm output Part number F5KA833M0D4DU F5KA833M0D4MG F5KY878M0B4ND Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 2.3 43 High Att. 1.4x1.0x0.5 1.4 20 Low IL 1.4x1.0x0.5 2.1 53 100ohm output Part number FAR-F5KA-897M50-D4DC FAR-F5KA-897M50-D4VW F5QA897M5M2AC FAR-F5KA-942M50-D4DD FAR-F5KB-942M50-B4EB FAR-F5KB-942M50-B4ES FAR-F5QB-942M50-P2BB F5KA942M5D4MYB FAR-F5KY-942M50-B4UW F5QG942M5P2KB F5QG942M5P2KF Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 2.2 16 High Att. 1.4x1.0x0.5 2.6 38 High Att. 1.1x0.9x0.5 2.3 18 1.4x1.0x0.5 2.0 34 High Att. 1.4x1.0x0.5 1.6 26 150ohm output 1.4x1.0x0.5 2.4 29 100ohm output 1.1x0.9x0.5 1.6 28 150ohm output 1.4x1.0x0.5 1.9 53 High Att. 1.4x1.0x0.5 2.0 57 100ohm, High Att. 1.1x0.9x0.5 2.2 56 100ohm, High Att. 1.1x0.9x0.5 2.2 60 100ohm output for LTE sawfilter_e-E04R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 152 16 PARTS NUMBER DCS/Band 3 System DCS Tx DCS Rx W-CDMA/LTE Band 3 PCS/GSM1900/Band 2 System US-PCS Tx US-PCS Rx GSM1900/US-PCS Rx GSM1900 Rx EGSM+GSM850 RxCommon Input DCS+GSM1900 Rx DCS+GSM1900 RxCommon Input DCS+GSM1900 RxCommon Input GSM1900+DCS Rx GSM1900+DCS RxCommon Input GSM1900+DCS RxCommon Output GSM1900+850 Rx GPS System GPS GPS/GNSS GPS+GLONASS+Galileo+Compass Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 2.5 30 1.1x0.9x0.5 2.1 22 1.4x1.0x0.5 2.1 20 1.4x1.0x0.5 1.5 14 150ohm output 1.1x0.9x0.5 1.8 15 100ohm 1.1x0.9x0.5 1.6 17 150ohm 1.1x0.9x0.5 2.0 38 Unbal. 1.4x1.0x0.5 3.0 50 100ohm, High Att. 1.1x0.9x0.5 3.2 45 100ohm output Part number FAR-F6KA-1G8800-L4AF FAR-F6KB-1G8800-B4GS F6QA1G880M2AQ FAR-F6KA-1G9600-D4MT F6QA1G960M2AP FAR-F6KB-1G9600-B4GP FAR-F6KY-1G9600-B4UU F6KY1G960B4NF F6QG1G960P2KT FAR-F6KA-1G9600-D4CR FAR-F6KB-1G9600-B4GB F6QB1G960P2BK Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 2.4 35 High Att. 1.4x1.0x0.5 2.3 28 100ohm input 1.1x0.9x0.5 1.7 20 1.4x1.0x0.5 3.4 43 High Att. 1.1x0.9x0.5 2.8 39 High Att. 1.4x1.0x0.5 2.1 23 100ohm output 1.4x1.0x0.5 2.9 49 100ohm, High Att. 1.4x1.0x0.5 2.8 50 100ohm output 1.1x0.9x0.5 2.8 44 100ohm output 1.4x1.0x0.5 2.0 18 1.4x1.0x0.5 1.6 18 150ohm output 1.1x0.9x0.5 1.5 15 150ohm output Part number FAR-G5QC-942M50-N2FB FAR-G5KT-942M50-Y4RW FAR-G5KW-942M50-Y4YD FAR-G5KC-942M50-Y4YW FAR-G5QC-942M50-N2CD FAR-G5KT-942M50-Y4RZ FAR-G5QD-942M50-N2DB FAR-G6QC-1G9600-N2FA G6QJ1G960M2MB FAR-G6KT-1G9600-Y4RU G6QD1G960N2DY FAR-G6KC-1G9600-Y4YY G6QC1G960N2CH G6QN1G960M2RE FAR-G6KT-1G9600-Y4RY FAR-G6KW-1G9600-Y4YC G6QE1G960N2EC G6QE1G960N2EE G6QF1G960N2GA Package Sizemm Insertion LossdB AttenuationdB Remarks 1.5x1.1x0.5 1.5/1.8 50/29 GSM850 150ohm output EGSM 150ohm output 1.8x1.4x0.5 1.9/2.2 50/25 GSM850 150ohm output EGSM 150ohm output 1.8x1.4x0.5 2.5/1.8 32/38 EGSM 150ohm output GSM850 150ohm output 1.8x1.4x0.5 1.8/1.4 31/54 EGSM 150ohm output GSM850 150ohm output 1.5x1.1x0.5 1.7/1.4 29/51 EGSM 150ohm output GSM850 150ohm output 1.8x1.4x0.5 2.2/1.9 25/52 EGSM 150ohm output GSM850 150ohm output 1.5x1.1x0.5 2.5/2.0 25/55 EGSM 150ohm output GSM850 150ohm output 1.5x1.1x0.5 1.9/1.7 17/13 DCS 150ohm output GSM1900 150ohm output 1.5x1.1x0.5 1.9/1.9 19/19 Rx Dual Unbal 1.8x1.4x0.5 1.8/2.0 18/13 DCS 150ohm output GSM1900 150ohm output 1.5x1.1x0.5 1.8/1.9 18/14 1 IN 4 OUT 150ohm output 1.8x1.4x0.5 1.9/1.8 14/16 GSM1900 150ohm output DCS 150ohm output 1.5x1.1x0.5 1.6/1.6 13/15 GSM1900 150ohm output DCS 150ohm output 1.5x1.1x0.5 2.0/2.3 22/25 Unbal 1in2out 1.8x1.4x0.5 1.9/1.8 13/18 GSM1900 150ohm output DCS 150ohm output 1.8x1.4x0.5 2.2/3.1 13/15 170ohm output for IMC 1.5x1.1x0.5 2.5/2.5 18/13 GSM1900 150ohm output DCS 150ohm output 1.5x1.1x0.5 2.2/2.2 31/14 GSM1900/DCS 150ohm output Low Loss 1.5x1.1x0.5 1.6/1.4 14/54 GSM1900 150ohm output GSM850 150ohm output Part number FAR-F6KA-1G5754-L4AJ F6QA1G575H2JF FAR-F6KB-1G5754-B4GE FAR-F6KB-1G5754-B4GU FAR-F6KA-1G5859-D4MS F6QA1G585M2AT FAR-F6KB-1G5859-B4HR F6QB1G585P2BQ F6KA1G581D4JR F6QA1G581M2QZ F6QA1G582H2JM F6BG1G582R6TT Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 0.9 Low loss, High Att. 1.1x0.9x0.5 0.96 Low loss, High Att. 1.4x1.0x0.5 1.1 100ohm, Low loss 1.4x1.0x0.5 1.2 100ohm, High Att. 1.4x1.0x0.5 1.0/1.2 1.1x0.9x0.5 1.1/1.4 1.4x1.0x0.5 1.1/1.4 100ohm output 1.1x0.9x0.5 1.5/1.7 100ohm output 1.4x1.0x0.5 1.6 1.1x0.9x0.5 1.1/1.4 1.1x0.9x0.5 1.2/1.8 Ladder High Att. 1.1x0.9x0.44 1.7 100ohm output HIGH FREQUENCY PRODUCTS GSM Dual System GSM850+EGSM Rx GSM850+EGSM RxCommon Input GSM850+EGSM Rx Common Output EGSM+GSM850 Rx Part number FAR-F6KA-1G7475-D4CY F6QA1G747M2QS FAR-F6KA-1G8425-D4CK FAR-F6KB-1G8425-B4GA F6QB1G842P2BM F6QB1G842P2BF F6QA1G842M2AN F6KY1G842B4UM F6QG1G842P2KD sawfilter_e-E04R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 16 153 PARTS NUMBER W-CDMA System W-CDMA Band 1 Tx HIGH FREQUENCY PRODUCTS Part number FAR-F6KA-1G9500-D4DG FAR-F6KB-1G9500-B4GJ F6QA1G950M2AA W-CDMA Band 1/4 Rx FAR-F6KA-2G1400-D4CG FAR-F6KB-2G1400-B4GC FAR-F6KA-2G1400-D4DW FAR-F6KY-2G1400-B4UY F6QA2G140M2AM F6QG2G140P2KA W-CDMA Band 1+2 Rx G6QL2G140M2PA W-CDMA Band 2+1 Rx G6QH2G140N2LP W-CDMA Band 4 Tx FAR-F6KA-1G7400-D4DE W-CDMA Band 5+8 Rx G5QH942M5N2LN W-CDMA Band 8+5 RxCommon Output G5QT942M5N2VA W-CDMA Band 7 Tx F6KA2G535L4AM W-CDMA/LTE Band 7 Rx FAR-F6KY-2G6550-B4UN F6QG2G655P2KE W-CDMA Band 9 Tx FAR-F6KA-1G7675-D4CT W-CDMA Band 9 Rx FAR-F6KB-1G8625-B4GT LTE Band 12 Tx F5KA707M5D4JW LTE Band 12 Rx F5KY737M0B4NN LTE Band 13 Tx FAR-F5KA-782M00-D4VP F5QA782M0M2AZ LTE Band 13 Rx FAR-F5KY-751M00-B4UQ F5QA751M0M2QM LTE Band 17 Tx FAR-F5KA-710M00-D4VQ F5QA710M0M2AY LTE Band 17 Rx FAR-F5KY-740M00-B4UR F5QG740M0P2KH LTE Band 18 Tx F5KA822M5D4VR LTE Band 18+5 (BC0) Tx F5KA832M0D4JS LTE Band 20 Tx F5KA847M0D4ML LTE Band 20 Rx F5KY806M0B4NE F5QA806M0M2QE LTE Band 21 Rx F6KY1G503B4NS F6QA1G503M2QF LTE Band 25 Tx F6QA1G882M2AS LTE Band 26 Rx F5QG876M5P2KQ LTE Band 28 Rx F5QA773M0M2QC F5QA788M0M2QB LTE Band 29 Rx F5BA722M5M6UW TD LTE Bnad 38 Tx F6KA2G595A4VL TD LTE Bnad 38 Rx F6QA2G595M2QK F6KB2G595B4HS F6QB2G595P2BS TD LTE Band 38+40Common output G6QE2G595N2EJ TD LTE Band 40 Tx F6HF2G350AF41 TD LTE Band 40 Rx F6QA2G350M2QA F6KB2G350B4HT F6KB2G350B4HTB Band 41 F6KA2G605A4LA F6HP2G593AP20 Other System ISM900B.W.26MHz TD-SCDMA/TD-LTE Band 34 TD-SCDMA/TD-LTE Band 39 TD-SCDMA Band 34+39 Part number FAR-F5QA-915M00-M2AK FAR-F6KA-2G0175-D4DR FAR-F6KA-1G9000-D4DS G6QJ2G017M2MD G6QE2G017N2EU G6QN2G017M2RD G6QN2G017M2RF TD-SCDMA Band 39+34Common input G6QD2G017N2DU TD-SCDMA Band 34+39Common input G6QD2G017N2DC Wireless LAN FAR-F6KA-2G4418-D4CU FAR-F6KA-2G4418-A4VA FAR-F6KA-2G4500-A4VD F6KA2G436A4VE F6KA2G466A4VJ F6HF2G441AF46 Package Sizemm Insertion LossdB AttenuationdB Remarks 1.4x1.0x0.5 1.6 38 Low loss, High Att. 1.4x1.0x0.5 2.1 34 100ohm output 1.1x0.9x0.5 1.8 38 Low loss, High Att. 1.4x1.0x0.5 1.9 39 Unbal. 1.4x1.0x0.5 1.7 39 100ohm output 1.4x1.0x0.5 1.9 48 High Att. 1.4x1.0x0.5 1.8 64 100ohm, High Att. 1.1x0.9x0.5 1.9 46 Unbal. 1.1x0.9x0.5 1.7 55 100ohm, High Att. 1.5x1.1x0.5 1.9/3.0 48/41 Rx Div Unbal. 1.5x1.1x0.5 3.2/2.3 53/54 2 (1.9G)100ohm out 1 (2G)100ohm out 1.4x1.0x0.5 1.5 44 1.5x1.1x0.5 1.6/20 56/50 100ohm output 1.5x1.1x0.5 2.3/2.0 48/48 100ohm output 1.4x1.0x0.5 1.6 30 Unbal. 1.4x1.0x0.5 2.8 54 100ohm. High Att. 1.1x0.9x0.5 2.5 52 100ohm. High Att. 1.4x1.0x0.5 1.8 31 Unbal. 1.4x1.0x0.5 2.1 40 100ohm output 1.4x1.0x0.5 1.6 23 Unbal. 1.4x1.0x0.5 1.4 57 100ohm output 1.4x1.0x0.5 1.5 55 Unbal. 1.1x0.9x0.5 1.5 56 Unbal. 1.4x1.0x0.5 1.6 50 100ohm output 1.1x0.9x0.5 1.9 50 Unbal. 1.4x1.0x0.5 1.2 32 Unbal. 1.1x0.9x0.5 1.3 33 Unbal. 1.4x1.0x0.5 1.4 60 100ohm output 1.1x0.9x0.5 1.4 65 100ohm output 1.1x0.9x0.5 1.6 40 Unbal. 1.4x1.0x0.5 1.5 19 Unbal. 1.4x1.0x0.5 1.7 52 Unbal. 1.4x1.0x0.5 2.5 45 100ohm output 1.1x0.9x0.5 2.7 41 Unbal. 1.4x1.0x0.5 1.4 47 100ohm output Low loss 1.1x0.9x0.5 2.0 52 Unbal. 1.1x0.9x0.5 1.8 23 Unbal. 1.1x0.9x0.5 2.2 59 100ohm output 1.1x0.9x0.5 2.1 52 Block A 1.1x0.9x0.5 2.0 52 Block B 1.1x0.9x0.44 1.6 38 Unbal. 1.4x1.0x0.5 1.5 Input Power +29dBm 1.1x0.9x0.5 1.9 1.4x1.0x0.5 2.6 150ohm output 1.1x0.9x0.5 2 Balanced 100ohm 1.5x1.1x0.5 2.9/2.8 Balanced 100ohm 1.4x1.0x0.6 2.3 Input Power +29dBm FBAR 1.1x0.9x0.5 2.2 1.4x1.0x0.5 2.7 150ohm output 1.4x1.0x0.5 2.5 Balanced 100ohm 1.4x1.0x0.5 2.4 Unbal High power design 2555-2655MHz BW100MHz 2.0x1.6x0.6 2.9 Unbal High power design 2496-2690MHz BW194MHz Package Sizemm Insertion LossdB AttenuationdB Remarks 1.1x0.9x0.5 1.8 1.4x1.0x0.5 1.8 High Att 1.4x1.0x0.5 1.6 1.5x1.1x0.5 1.3/1.4 2 IN/2 OUT 1.5x1.1x0.5 1.8/1.8 Balanced 100ohm 1.5x1.1x0.5 1.6/2.0 1 IN/2 OUT 1.5x1.1x0.5 1.5/1.8 1 IN/2 OUT Good Shape Factor 1.5x1.1x0.5 1.7/2.0 Balanced 100ohm 1.5x1.1x0.5 2.2/1.8 Balanced 200ohm 1.4x1.0x0.5 2.6 +10dBm 1.4x1.0x0.5 3.0 +23dBm 1.4x1.0x0.5 1.9 Low IL,+19dBm 1.4x1.0x0.5 2.5 BW=72MHz,+24dBm 1.4x1.0x0.5 2.8 BW=68MHz,+24dBm 1.4x1.0x0.6 1.6 2402.5-2481.5MHz Input Power +28dBm FBAR sawfilter_e-E04R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 154 16 MULTILAYER EMI SUPPRESSION FILTERS PACKAGING Minimum Quantity Taped package Standard Quantity [pcs] Embossed tape 3000 Thickness mminch 1.00.039 Type FK 21250805 Tape material Embossed Tape Top tape Sprocket hole Base tape Chip cavity Chip filled Chip Taping dimensions Embossed tape 8mm wide Chip cavity A B 1.50.2 2.30.2 0.0590.008 0.0910.008 Type FK 21250805 Insertion pitch F 4.00.1 0.1570.004 Tape thickness K T 2.0 max. 0.3 max. 0.079 max. 0.012 max. Unit : mminch Leader and Blank portion Blank portion 160mm or more (6.3inches or more) Chip cavity Blank portion Leader 100mm or more (3.94inches or more) Direction of tape feed 400mm or more (15.7inches or more) This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . emifilter_pack_e-E02R01 Reel size t E C R B D A W A 1782.0 B 50min. C 13.00.2 D 21.00.8 E 2.00.5 R 1.0 t 2.5max. W 101.5 Unitmm Top tape strength The top tape requires a peel;-off force of 0.10.7N in the direction of the arrow as illustrated below. Pull direction 015 Top tape Base tape This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . emifilter_pack_e-E02R01 Filter RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bending Test. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 11. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 12. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 Duplexer RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 51 sec. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. High Temperature Bias Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 50, 29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01