May 2018
EMC Components
For general signal line
MMZ1005 1005[0402 inch]*
* Dimensions Code JIS[EIA]
Chip beads
MMZ1005
type
MMZ series
(2/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
EMC Components
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
Chip beads
For general signal line
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 8 materials of different features for countermeasures against everything from general signals to
high-speed signals.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
The Storage temperature range is for after the circuit board is mounted.
Overview of MMZ1005 type
MMZ 1005 S 800 C T 000
Series name L×W×T dimensions Material name Impedance Characteristic
type Packaging style Internal code
(mm) () at 100MHz
1005 1.0×0.5x0.5 B 800 80 C T Taping 000
D 121 120
F
S
Y
Type
Temperature range Package quantity Individual weight
Operating
temperature
（°C）
Storage
temperature
（°C）(pieces/reel) （mg）
MMZ1005 –55 to +125 –55 to +125 10,000 1
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(5/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in
the GHz range.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
B
S
D
Y
0
200
400
600
800
1000
1200
1400
1600
1800
2000
10 100 1000
Frequency(MHz)
Impedance(Ω)
F
(6/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
0.5±0.05
1±0.05
0.1min.
0.5±0.05
Dimensions in mm
0.40.5 0.5
0.5
(7/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
○Measurement equipment
＊ Equivalent measurement equipment may be used.
Impedance DC resistance Rated current Part No.
[100MHz]
()Tolerance ()max. (mA)max.
80 ±25% 0.19 450 MMZ1005B800CT000
120 ±25% 0.25 400 MMZ1005B121CT000
600 ±25% 0.85 200 MMZ1005B601CT000
80 ±25% 0.12 500 MMZ1005S800CT000
120 ±25% 0.22 500 MMZ1005S121CT000
240 ±25% 0.28 400 MMZ1005S241CT000
600 ±25% 0.52 300 MMZ1005S601CT000
1000 ±25% 0.75 200 MMZ1005S102CT000
40 ±25% 0.10 550 MMZ1005Y400CT000
80 ±25% 0.17 450 MMZ1005Y800CT000
120 ±25% 0.18 400 MMZ1005Y121CT000
240 ±25% 0.26 300 MMZ1005Y241CT000
300 ±25% 0.38 250 MMZ1005Y301CT000
470 ±25% 0.47 250 MMZ1005Y471CT000
600 ±25% 0.54 250 MMZ1005Y601CT000
1000 ±25% 0.70 200 MMZ1005Y102CT000
1500 ±25% 1.00 100 MMZ1005Y152CT000
1800 ±25% 0.85 150 MMZ1005Y182CT000
10 ±50.10 500 MMZ1005D100CT000
22 ±25% 0.17 400 MMZ1005D220CT000
33 ±25% 0.24 400 MMZ1005D330CT000
68 ±25% 0.38 400 MMZ1005D680CT000
120 ±25% 0.60 350 MMZ1005D121CT000
240 ±25% 0.90 200 MMZ1005D241CT000
33 ±25% 0.50 200 MMZ1005F330CT000
47 ±25% 0.60 100 MMZ1005F470CT000
56 ±25% 0.70 100 MMZ1005F560CT000
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Keysight Technologies
DC resistance Type-7556 Yokogawa
(8/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ1005B series MMZ1005S series MMZ1005Y series
MMZ1005D series MMZ1005F series
0
100
200
300
400
500
600
700
800
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005B601C
MMZ1005B121C
MMZ1005B800C
0
200
400
600
800
1000
1200
1400
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005S102C
MMZ1005S601C
MMZ1005S241C
MMZ1005S121C
MMZ1005S800C
0
200
400
600
800
1000
1200
1400
1600
2200
1800
2000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005Y152C
MMZ1005Y182C
MMZ1005Y102C
MMZ1005Y601C
MMZ1005Y471C
MMZ1005Y301C
MMZ1005Y241C
MMZ1005Y121C
MMZ1005Y800C
MMZ1005Y400C
0
500
1000
1500
2000
2500
3000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005D241C
MMZ1005D121C
MMZ1005D680C
MMZ1005D330C
MMZ1005D220C
MMZ1005D100C
0
200
400
600
800
1000
1200
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005F560C
MMZ1005F470C
MMZ1005F330C
(9/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005B800CT000 MMZ1005B121CT000 MMZ1005B601CT000
MMZ1005S800CT000 MMZ1005S121CT000 MMZ1005S241CT000
MMZ1005S601CT000 MMZ1005S102CT000 MMZ1005Y400CT000
MMZ1005Y800CT000 MMZ1005Y121CT000 MMZ1005Y241CT000
MMZ1005Y301CT000 MMZ1005Y471CT000 MMZ1005Y601CT000
120
40
20
60
80
100
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
20
40
60
80
100
120
140
160
180
Frequency (MHz)
Impedance (Ω)
ZR
X
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
R
X
400
350
300
250
200
150
100
50
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
R
X
50
100
150
200
250
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
R
X
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
X
R
200
400
600
800
1000
1200
1400
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
10
20
30
40
50
60
70
80
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
100
200
300
400
500
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
Z
R
X
50
100
150
200
250
Frequency (MHz)
Impedance (Ω)
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
R
X
100
200
300
400
500
600
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200
400
600
800
1000
1200
(10/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005Y102CT000 MMZ1005Y152CT000 MMZ1005Y182CT000
MMZ1005D100CT000 MMZ1005D220CT000 MMZ1005D330CT000
MMZ1005D680CT000 MMZ1005D121CT000 MMZ1005D241CT000
MMZ1005F330CT000 MMZ1005F470CT000 MMZ1005F560CT000
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
1800
1600
1400
1200
1000
800
600
400
200
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
1
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
50
100
150
200
250
300
1 10 100 1000 10000
0
50
100
150
200
Frequency (MHz)
Impedance (Ω)
R
X
Z
70
60
50
40
30
20
10
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
1 10 100 1000 10000
0
200
400
600
800
1000
Frequency (MHz)
Impedance (Ω)
R
X
Z
3000
2500
2000
1500
1000
500
01 10 100 1000 10000
R
X
Z
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
600
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
1200
1000
800
600
400
200
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
1000
900
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
XR
100
200
300
400
500
600
700
(11/11)
20180521 / beads_commercial_signal_mmz1005_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1005 type
PACKAGING STYLE
REEL DIMENSIONS
TAPE DIMENSIONS
Dimensions in mm
Ty p e A B P1 K
MMZ1005 0.65±0.1 1.15±0.1 2.0±0.05 0.8max.
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
Dimensions in mm
1.0
ø60min.
14.4max.
8.4 +2.0
–0.0
4.0±0.12.0±0.05
B
A P1
8.0±0.3
1.75±0.1
3.5±0.05
K
1.5 +0.1
0
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
