Amphenol
Interconnection
Accessories
•For use on 62GB, MIL-C-26482, BS9522, F0017 connector ranges.
•MIL-C-38999 Series1, BS9522, F0029, BS9520, G0001, HE308.
•The 5001 Backshells are suitable for termination using Bandit, Zetalock and
Heatshrink product.
•The 5001 Backshell is designed to give 360º screening.
Amphenol
Amphenol Interconnection Accessories - Amphenol Distributor:
5001 Backshell Series
Amphenol
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
MM
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5001 SERIES
BACKSHELL
STRAIGHT
A THREAD
1.431 MAX
1.179 MAX
∅H MAX
∅G MAX
∅B MAX
PART NUMBER A-THREAD ∅B MAX ∅G MAX ∅H MAX REC HELLERMAN REC HELLERMAN SPRING
BOOT 90o BOOT STRAIGHT REF
5001-08-00-00-10-AA-XX 7/16-28 UNEF 18.14 6.48 14.04 1152-4-GW24 152-42-GW24 HE 050
5001-10-00-00-10-AA-XX 9/16-24 UNEF 20.45 8.05 15.61 1154-4-GW24 154-42-GW24 HE 100
5001-12-00-00-10-AA-XX 11/16-24 UNEF 24.64 11.25 18.81 1155-4-GW24 155-42-GW24 HE 100
5001-14-00-00-10-AA-XX 13/16-20 UNEF 29.13 12.83 20.39 1155-4-GW24 155-42-GW24 HE 200
5001-16-00-00-10-AA-XX 15/16-20 UNEF 32.13 16.00 23.57 1156-4-GW24 156-42-GW24 HE 200
5001-18-00-00-10-AA-XX 1 1/16-18 UNEF 32.64 19.18 26.74 1156-4-GW24 156-42-GW24 HE 300
5001-20-00-00-10-AA-XX 1 3/16-18 UNEF 39.78 22.38 29.92 1157-4-GW24 157-43-GW24 HE 300
5001-22-00-00-10-AA-XX 1 5/16-18 UNEF 43.28 25.55 33.09 1157-4-GW24 157-43-GW24 HE 300
5001-24-00-00-10-AA-XX 1 7/16-18 UNEF 44.25 25.55 33.09 1157-4-GW24 157-43-GW24 HE 300
5001-08-06-00-10-AA-XX 7/16–28 UNEF 18.14 4.83 14.04 1152-4-GW24 152-42-GW24 HE 050
5001-10-08-00-10-AA-XX 9/16-24 UNEF 20.45 6.48 14.04 1154-4-GW24 154-42-GW24 HE 050
5001-12-10-00-10-AA-XX 11/16-24 UNEF 24.64 8.05 15.61 1155-4-GW24 155-42-GW24 HE 100
5001-14-12-00-10-AA-XX 13/16-20 UNEF 29.13 11.25 18.81 1155-4-GW24 155-42-GW24 HE 100
5001-16-14-00-10-AA-XX 15/16-20 UNEF 32.13 12.83 20.39 1156-4-GW24 156-42-GW24 HE 200
5001-18-16-00-10-AA-XX 1 1/16-18 UNEF 32.64 16.00 23.57 1156-4-GW24 156-42-GW24 HE 200
5001-20-18-00-10-AA-XX 1 3/16-18 UNEF 39.78 19.18 26.74 1157-4-GW24 157-43-GW24 HE 300
5001-22-20-00-10-AA-XX 1 5/16-18 UNEF 43.28 22.38 29.92 1157-4-GW24 157-43-GW24 HE 300
5001-24-22-00-10-AA-XX 1 7/16-18 UNEF 44.25 25.55 33.09 1157-4-GW24 157-43-GW24 HE 300
Amphenol
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
INCHES
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5001 SERIES
BACKSHELL
STRAIGHT
A THREAD
1.431 MAX
1.179 MAX
∅H MAX
∅G MAX
∅B MAX
PART NUMBER A-THREAD ∅B MAX ∅G MAX ∅H MAX REC HELLERMAN REC HELLERMAN SPRING REF
BOOT 90o BOOT STRAIGHT
5001-08-00-00-10-AA-XX 7/16-28 UNEF 0.714 0.255 0.5528 1152-4-GW24 152-42-GW24 HE 050
5001-10-00-00-10-AA-XX 9/16-24 UNEF 0.805 0.317 0.6146 1154-4-GW24 154-42-GW24 HE 100
5001-12-00-00-10-AA-XX 11/16-24 UNEF 0.970 0.443 0.7406 1155-4-GW24 155-42-GW24 HE 100
5001-14-00-00-10-AA-XX 13/16-20 UNEF 1.147 0.505 0.8028 1155-4-GW24 155-42-GW24 HE 200
5001-16-00-00-10-AA-XX 15/16-20 UNEF 1.265 0.630 0.9280 1156-4-GW24 156-42-GW24 HE 200
5001-18-00-00-10-AA-XX 1 1/16-18 UNEF 1.285 0.755 1.0528 1156-4-GW24 156-42-GW24 HE 300
5001-20-00-00-10-AA-XX 1 3/16-18 UNEF 1.566 0.881 1.1780 1157-4-GW24 157-43-GW24 HE 300
5001-22-00-00-10-AA-XX 1 5/16-18 UNEF 1.704 1.006 1.3028 1157-4-GW24 157-43-GW24 HE 300
5001-24-00-00-10-AA-XX 1 7/16-18 UNEF 1.742 1.006 1.3028 1157-4-GW24 157-43-GW24 HE 300
5001-08-06-00-10-AA-XX 7/16 – 28 UNEF 0.714 0.190 0.5528 1152-4-GW24 152-42-GW24 HE 050
5001-10-08-00-10-AA-XX 9/16-24 UNEF 0.805 0.255 0.5528 1154-4-GW24 154-42-GW24 HE 050
5001-12-10-00-10-AA-XX 11/16-24 UNEF 0.970 0.317 0.6146 1155-4-GW24 155-42-GW24 HE 100
5001-14-12-00-10-AA-XX 13/16-20 UNEF 1.147 0.443 0.7406 1155-4-GW24 155-42-GW24 HE 100
5001-16-14-00-10-AA-XX 15/16-20 UNEF 1.265 0.505 0.8028 1156-4-GW24 156-42-GW24 HE 200
5001-18-16-00-10-AA-XX 1 1/16-18 UNEF 1.285 0.630 0.9280 1156-4-GW24 156-42-GW24 HE 200
5001-20-18-00-10-AA-XX 1 3/16-18 UNEF 1.566 0.755 1.0528 1157-4-GW24 157-43-GW24 HE 300
5001-22-20-00-10-AA-XX 1 5/16-18 UNEF 1.704 0.881 1.1780 1157-4-GW24 157-43-GW24 HE 300
5001-24-22-00-10-AA-XX 1 7/16-18 UNEF 1.742 1.006 1.3028 1157-4-GW24 157-43-GW24 HE 300
Amphenol
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
MM
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5001 SERIES
BACKSHELL
RIGHT ANGLE
A THREAD
D MAX
J MAX
E MAX
17.98 MAX
PART NUMBER A-THREAD D MAX ∅B MAX E MAX ∅G MAX ∅H MAX J MAX REC HELLERMAN SPRING
BOOT STRAIGHT REF
5001-08-00-90-10-AA-XX 7/16-28 UNEF 35.18 18.14 25.98 6.48 14.04 32.39 152-42-GW24 HE 050
5001-10-00-90-10-AA-XX 9/16-24 UNEF 38.35 20.45 29.16 8.05 15.61 35.56 154-42-GW24 HE 100
5001-12-00-90-10-AA-XX 11/16-24 UNEF 39.75 24.64 32.33 11.25 18.81 38.74 155-42-GW24 HE 100
5001-14-00-90-10-AA-XX 13/16-20 UNEF 46.30 29.13 37.11 12.83 20.39 43.51 155-42-GW24 HE 200
5001-16-00-90-10-AA-XX 15/16-20 UNEF 47.70 32.13 40.28 16.00 23.57 46.69 156-42-GW24 HE 200
5001-18-00-90-10-AA-XX 1 1/16-18 UNEF 47.70 32.64 40.28 19.18 26.74 46.69 156-42-GW24 HE 300
5001-20-00-90-10-AA-XX 1 3/16-18 UNEF 55.63 39.78 48.21 22.38 29.92 54.61 157-43-GW24 HE 300
5001-22-00-90-10-AA-XX 1 5/16-18 UNEF 58.80 43.28 51.38 25.55 33.09 57.79 157-43-GW24 HE 300
5001-24-00-90-10-AA-XX 1 7/16-18 UNEF 58.80 44.25 51.38 25.55 33.09 57.79 157-43-GW24 HE 300
5001-08-06-90-10-AA-XX 7/16 – 28 UNEF 33.40 18.14 25.98 4.83 14.04 32.39 152-42-GW24 HE 050
5001-10-08-90-10-AA-XX 9/16-24 UNEF 36.58 20.45 29.16 6.48 14.04 35.56 154-42-GW24 HE 050
5001-12-10-90-10-AA-XX 11/16-24 UNEF 39.75 24.64 32.33 8.05 15.61 38.74 155-42-GW24 HE 100
5001-14-12-90-10-AA-XX 13/16-20 UNEF 44.53 29.13 37.11 11.25 18.81 43.51 155-42-GW24 HE 100
5001-16-14-90-10-AA-XX 15/16-20 UNEF 47.70 32.13 40.28 12.83 20.39 46.69 156-42-GW24 HE 200
5001-18-16-90-10-AA-XX 1 1/16-18 UNEF 47.70 32.64 40.28 16.00 23.57 46.69 156-42-GW24 HE 200
5001-20-18-90-10-AA-XX 1 3/16-18 UNEF 55.63 39.78 48.21 19.18 26.74 54.61 157-43-GW24 HE 300
5001-22-20-90-10-AA-XX 1 5/16-18 UNEF 58.80 43.28 51.38 22.38 29.92 57.79 157-43-GW24 HE 300
5001-24-22-90-10-AA-XX 1 7/16-18 UNEF 58.80 44.25 51.38 25.55 33.09 57.79 157-43-GW24 HE 300
∅G MAX
∅B MAX
∅H MAX
Amphenol
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
INCHES
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5001 SERIES
BACKSHELL
RIGHT ANGLE
A THREAD
D MAX
J MAX
E MAX
0.708 MAX
PART NUMBER A-THREAD D MAX ∅B MAX E MAX ∅G MAX ∅H MAX J MAX REC HELLERMAN SPRING
BOOT STRAIGHT REF
5001-08-00-90-10-AA-XX 7/16-28 UNEF 1.385 0.714 1.023 0.255 0.5528 1.275 152-42-GW24 HE 050
5001-10-00-90-10-AA-XX 9/16-24 UNEF 1.510 0.805 1.148 0.317 0.6146 1.400 154-42-GW24 HE 100
5001-12-00-90-10-AA-XX 11/16-24 UNEF 1.565 0.970 1.273 0.443 0.7406 1.525 155-42-GW24 HE 100
5001-14-00-90-10-AA-XX 13/16-20 UNEF 1.823 1.147 1.461 0.505 0.8028 1.713 155-42-GW24 HE 200
5001-16-00-90-10-AA-XX 15/16-20 UNEF 1.878 1.265 1.586 0.630 0.9280 1.838 156-42-GW24 HE 200
5001-18-00-90-10-AA-XX 1 1/16-18 UNEF 1.878 1.285 1.586 0.755 1.0528 1.838 156-42-GW24 HE 300
5001-20-00-90-10-AA-XX 1 3/16-18 UNEF 2.190 1.566 1.898 0.881 1.1780 2.150 157-43-GW24 HE 300
5001-22-00-90-10-AA-XX 1 5/16-18 UNEF 2.315 1.704 2.023 1.006 1.3028 2.275 157-43-GW24 HE 300
5001-24-00-90-10-AA-XX 1 7/16-18 UNEF 2.315 1.742 2.023 1.006 1.3028 2.275 157-43-GW24 HE 300
5001-08-06-90-10-AA-XX 7/16 – 28 UNEF 1.315 0.714 1.023 0.190 0.5528 1.275 152-42-GW24 HE 050
5001-10-08-90-10-AA-XX 9/16-24 UNEF 1.440 0.805 1.148 0.255 0.5528 1.400 154-42-GW24 HE 050
5001-12-10-90-10-AA-XX 11/16-24 UNEF 1.565 0.970 1.273 0.317 0.6146 1.525 155-42-GW24 HE 100
5001-14-12-90-10-AA-XX 13/16-20 UNEF 1.753 1.147 1.461 0.443 0.7406 1.713 155-42-GW24 HE 100
5001-16-14-90-10-AA-XX 15/16-20 UNEF 1.878 1.265 1.586 0.505 0.8028 1.838 156-42-GW24 HE 200
5001-18-16-90-10-AA-XX 1 1/16-18 UNEF 1.878 1.285 1.586 0.630 0.9280 1.838 156-42-GW24 HE 200
5001-20-18-90-10-AA-XX 1 3/16-18 UNEF 2.190 1.566 1.898 0.755 1.0528 2.150 157-43-GW24 HE 300
5001-22-20-90-10-AA-XX 1 5/16-18 UNEF 2.315 1.704 2.023 0.881 1.1780 2.275 157-43-GW24 HE 300
5001-24-22-90-10-AA-XX 1 7/16-18 UNEF 2.315 1.742 2.023 1.006 1.3028 2.275 157-43-GW24 HE 300
∅B MAX
∅H MAX
∅G MAX
Amphenol
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
MM
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5101 SERIES
BACKSHELL STRAIGHT
FOR HEATSHRINK BOOT
G MAX
H MAX
A THREAD
∅
∅
B MAX
∅
0.969
0.721
Amphenol
ÆB MAX
ÆG MAX
∅H MAX
A-THREAD
0.969
0.721
MATERIAL AND FINISH CODES
ARE SPECIFIED ON ORDER
NOTE:
ALL DIMENSIONS SHOWN ARE
FINISHED DIMENSIONS AFTER
PLATING/METAL FINISHING
AMPHENOL LTD
Amphenol Ltd
Thanet Way,
Whitstable, Kent.
CT5 3JF
Tel: 01227 773200 Fax: 01227 276571
CHECKED DIMENSIONS IN
Inches
SCALE TOLERANCES
This drawing is the property of Amphenol Ltd
and shall not be copied or
disclosed to a third party without the
express permission of Amphenol Ltd
Amphenol Ltd 2000©
TITLE
Drawing Number
THIRD ANGLE
PROJECTION 5101 SERIES
BACKSHELL STRAIGHT
WITH HEATSHRINK BOOT
XXXX01 XX
AIA Series - Backshell Connectors
Amphenol Thanet Way, Whitstable, Kent. CT5 3JF. Tel: 01227 773200 Fax: 01227 276571
01.11.2000
Notice: Products are sold subject to Amphenol’s conditions of sale (“the standard conditions”). All specifications and statements contained herein are believed to be correct at the time
of printing, but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance
characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or
that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe
any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement.
For further information on cables, connectors and assemblies please consult your local office.
Product specifications and performance characteristics are typical only, and subject to change.
Part Number Information XX XX
Denotes Connector Style
01 = Series 2 62GB
AIA50
Denotes Connector Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24
Denotes Backshell Inlet Size
See Chart for Inlet Standard
Consult Factory for Alternatives
Denotes Backshell Exit Angle
00 = 0o
45 = 45o
90= 90o
Consult Factory for Alternatives
Denotes Working Length
00 = Standard
Consult Factory for Alternatives
Denotes Backshell Material
AA = Aluminium Alloy
RB = Aluminium Bronze
SS = Stainless Steel
XX
Denotes Backshell Plating Finish
01 = Unplated
02 = Electroless Nickel
03 = Cadmium with Olive Drab Chromate Passivation
04 = Zinc Cobalt with Green Chromate Passivation
05 = Zinc Cobalt with Black Chromate Passivation
Denotes Backshell Style
50 = Zeta Lock Termination with heatshrink
boot groove
51 = Spin Coupler to take heatshrink boot
