COMPACT FLASH CARD CONNECTORS 560H SERIES (CFA COMPATIBLE) FEATURES * The connectors conform to the Compact Flash Association (CFA) specifications. * The terminal of the plug is a 0.635 mm pitch, onerow, SMT type. * Raised mounting type connectors (standoff), which allow mounting components under a connector, are also available. * The ejector mechanism makes insertion and ejection of a card easier is available. * There are two types of sockets for CFA cards: a straddle mount type and single-sided mounting type. SPECIFICATIONS Item Specification Operating temperature range -55 to +85 C Rated current 0.5A DC Rated voltage 250V AC Contact resistance 80m max (DC 20mV, 10mA) Insulation resistance 1000M min., 500V DC, Dielectric withstand voltage 500V DC PIN CONNECTOR (PLUG) CONTACT LENGTH Contact Type Pin no. Contact length Power, ground pins 1, 13, 38, 50 4.98 mm (0.196 in.) Card dection pins 25, 26 3.48 mm (0.137 in.) Other signal pins Other 4.24 mm (0.167 in.) MATERIALS Item Material Insulating material Main body: PPS resin UL94V-0 Guide: PBT UL94V-0 Button: ABS UL94V-0 Conductor Copper alloy Plating Contact: gold Terminal: palladium Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 560H Series (Compact Flash Connector) RIGHT ANGLE PLUG, SMT TYPE (WITH NO EJECTOR) DIMENSIONS 1.27 (.050) No. 13 No. 38 40.16 (1.581) No. 50 1.75 (.069) No. 25 No. 13 5.1 (0.201) 2.5 (0.098) 3.508 (0.138003) Section B-B 2x0.890.05 (.035.002) B 5.25 (0.207) 3.5 (0.138) 9.5 (0.374) 4.5 (0.177) 2.54 (0.1) 11 (0.433) 1 (.039) 1.8 (.071) 1.5+0-0.1(0.059+0-0.004) 4.5 (.177) 2.60.03 (.102.0001) 1.40.05 (.055.002) 1.27(.050) No. 1 1 (0.039) 2 (.079) 35.9 (1.413) 50.6 (1.992) 43.030.06 (1.225.002) B 30.48 (1.200) 2x2 (0.079) Unit: mm (in.) PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 20.15 (0.0790.006) 3.5 (0.138) 1.85+0-0.1 (0.073+0-0.004) The End of the P.C. Board 3 0.0 1.7 1 2 x 70.00 ) (0.6 31.1150.05 (1.2250.002) 40.160.05 (1.5810.002) 46.130.15 (1.8160.006) 5.55-0 (0.219-0) No.50 No.38 0.6350.03 (0.0250.001) No.26 2x3 (.079 x .118) No.25 47.10 -0 (1.854-0) 7.45 (0.293) 20.5-0 (0.807-0) No.1 No.13 Component mounting prohibited area 7.6-0(0.299-0) 0.40.03 (0.0160.001) 2x (0. 2. 08 2 0. 7 0. 05 00 30.1 2) (.1180.004) 2 x 50.15 (0.1970.006) 3.5 (0.1380.002) 0.05 7.550.05 (0.2970.002) Recommended PCB Pattern 3 (.118) 4.5 (.177) 1.25 (.049) 1 16 (.630) (.039) 19 (.749) 25 (.984) 26.5 (1.043) 2x4 (0.157) .2 O2 2x 86) (.0 40.16 (1.581) 31.1150.2 (1.225.008) 0.6350.15 (.025.006) 0.790.06 (.031.002) Component mounting prohibited area Unit: mm (in.) ORDERING PART NUMBER FCN-568H050-G/A1 Specifications subject to change For above connector with ejector mechanism see page 3. Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 560H Series (Compact Flash Connector) RIGHT ANGLE PLUG, SMT TYPE (WITH EJECTOR) DIMENSIONS 10.95 (0.431) Connector/Ejector mechanism (P/N FCN-560HAC) Connector/Ejector Kit 7.85 (0.309) 47.6 (1.874) 5.5 (0.217) 28.6 (1.126) 5.8 (0.228) 0.3 (0.012) 1.5 (0.060) 17.4 (0.685) at card inserted 27.3 (1.074) 6.75 (0.266) 10.65 (0.420) at card ejected 23.8 (0.937) 29.25 (1.151) Unit: mm (in.) ORDERING PART NUMBER FOR CONNECTOR/EJECTOR KIT FCN-568H050-G/A1AC Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 560H Series (Compact Flash Connector) RIGHT ANGLE PLUG, SMT TYPE (WITH NO EJECTOR, TO BE MOUNTED ON BACK OF PC BOARD) DIMENSIONS B No. 50 (1.2250.002) No. 26 1.27 x (25-1) = 30.48 (1.200) No. 38 1.27 No. 13 (0.050) 40.16 (1.581) No. 25 9.5 (0.374) 11 (0.433) 1.5(0.059) 1.5+0-0.1(0.059+0-0.004) 26.5 (1.043) 5.1 (0.201) 1.4 0.05(0.0550.002) 43.030.06 0.79 0.05 (0.0310.002) 1.27 (0.050) 25 (0.984) 35.9 (1.413) 50.6 (1.992) 1.8 (0.070) 4.5 (0.177) 2 X 2.0 (0.079) 2.54 (0.1) B 19 (0.749) 16 (0.630) 2X4 (0.157) 4.5 (0.177) 1 (0.039) 3.5 (0.138) 5.25 (0.207) 4.5 (0.177) 1 (0.039) 0.6350.15 (0.0250.006) 2 x (0 2 .0 .2 86 ) 1.25 (0.049) 40.16 (1.581) 31.1150.15 (1.2250.006) 2.5 (0.098) 3.508 (0.138003) Section B-B No. 1 2 x 0.89 (0.035) Unit: mm (in.) PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 2x3 (.079 x .118) 47.10 -0 (1.854-0) 3 (0.118) 5.55 (0.219) 7.45 (0.293) 3.5 (0.138) 7.6-0 (0.299-0) 20.5-0(0.807-0) ) x 2 0.67 ( 2 x 50.15 (0.1970.006) (1180.004) 30.1 .0 02 2 (0 x 2 .0 .2 87 0. 05 0 No.1 No.25 No.13 0.6350.03 (0.0250.001) 0.635 x (50 - 1) = 31.1150.05 (1.2250.002) 3 .0 0 .7 001 ) 1 0. 3.50.05 (0.1380.002) 0.40.03 (0.0160.001) No.50 No.26 No.38 1.85+0-0.1 +0 (0.073-0.004 ) Component mounting prohibited area Recommended PCB pattern 20.15 (0.0790.006) 7.550.05 (0.2970.002) The End of the P.C. Board 46.130.15 (1.8160.006) Component mounting prohibited area Unit: mm (in.) ORDERING PART NUMBER FCN-568H050-G/A2 Specifications subject to change For above connector with ejector mechanism see page 5. Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 560H Series (Compact Flash Connector) RIGHT ANGLE PLUG, SMT TYPE (WITH EJECTOR, TO BE MOUNTED ON BACK OF PC BOARD) DIMENSIONS 10.95 (0.431) Connector/Ejector mechanism (P/N FCN-560HAD) 7.85 (0.309) Connector/Ejector Kit 23.8 (0.937) 1.5 (0.060) 5.8 (0.228) 29.25 (1.151) 0.3 (0.011) 10.65 (0.420) when card is ejected 28.6 (1.126) 27.3 (1.874) 17.4 (0.685) when card is inserted 5.5 (0.217) 47.6 (1.874) Unit: mm (in.) ORDERING PART NUMBER FOR CONNECTOR/EJECTOR KIT FCN-568H050-G/A2AD Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5 560H Series (Compact Flash Connector) RIGHT-ANGLE PLUG, SMT TYPE (WITH NO EJECTOR, 1.64mm RAISED TYPE) DIMENSIONS 35.9 (1.413) 1.4 0.05 (0.0550.002) 1.27 (0.050) 50.60 (1.992) 43.030.06 (1.2250.002) No. 1 No. 13 1.27 (0.050) No. 26 1.64 (0.065) 6.64 (0.261) 3.5 (0.138) 11 (0.433) A 9.5 (0.374) +0 -0.1(0.059 -0.004) 1.5+0 4.5 (0.177) 2.54 (0.1) 1.5 (0.060) 25 (0.984) 26.5 (1.043) 1.8 (0.070) 2.5 (0.098) 3.508 (0.138003) Section B-B No. 38 Unit: mm (in.) No. 50 2 x 0.890.05 (0.0350.002) 01 0.0 7 (0.6 ) ORDERING PART NUMBER FCN-568H050-G/A3 Specifications subject to change 2.3 (0.090) +0 +0 5.55 (0.219) 3 (0.118) 3.5 (0.138) 47.10 -0 (1.854-0) 7.45 (0.293) 3.0-0 (0.118-0) 2 x 50.15 (0.1970.006) 3 0.0 40.160.05 (1.5810.002) 46.130.15 (1.8160.006) 7 0.6350.03 (0.0250.001) 0.635 x (50 - 1) = 31.1150.05 (1.2250.002) 20.5-0 (0.807-0) 7.6-0 (0.299-0) 2 (0. x 2 08 .2 0 7 0. .05 00 2 ) 0.1 0.004 3 (118 ) No.26 No.38 No.50 1. 2x3 (0.079 x 0.118) Component mounting prohibited area 0.40.03 (0.0160.001) No.25 No.1 No.13 2x 20.15 (0.0790.006) 3.50.05 (0.1380.002) Recommended PCB pattern 1.85-0.1 (0.073-0.004) PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 7.550.05 (0.2970.002) No. 25 30.48 (1.2) 1 (0.039) 4.5 (0.177) 2.0 (0.079) 19 (0.749) B 0.79 0.05(0.0310.002) 1.75 (0.069) 16 (0.630) 2x4 (0.157) .2 2 ) 2 x .086 (0 0.6350.15 (0.0250.006) 4.5 (0.177) 1 (0.039) 31.1150.15 (1.2250.006) 1.25 (0.050) 40.16 (1.581) 5.25 (0.207) B The End of the P.C. Board Component mounting prohibited area Component with 1.1 mm (0.043 in.) or less height can be mounted. Unit: mm (in.) For above connector with ejector mechanism see page 7. Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6 560H Series (Compact Flash Connector) RIGHT-ANGLE PLUG, SMT TYPE (WITH EJECTOR, 1.64mm (0.065 in.) RAISED TYPE) DIMENSIONS 10.95 (0.431) Connector/Ejector mechanism (P/N FCN-560HAC) 7.85 (0.309) Connector/Ejector Kit 5.5 (0.217) 47.6 (1.874) 27.3 (1.074) 17.4 (0.685) when card is inserted 10.65 (0.420) when card is ejected 1.5 (0.060) 29.25 (1.151) 4.05 (0.159) 1.84 (0.072) 7.34 (0.289) 28.6 (1.126) 6.75 (0.266) 23.8 (0.937) Unit: mm (in.) ORDERING PART NUMBER FOR CONNECTOR/EJECTOR KIT FCN-568H050-G/A3AC Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 7 560H Series (Compact Flash Connector) RIGHT-ANGLE PLUG, SMT TYPE (WITH NO EJECTOR, 1.64mm (0.065) RAISED TYPE, TO BE MOUNTED ON BACK OF PC BOARD) DIMENSIONS No. 26 30.48 (1.200) No. 38 1.27 (0.050) No. 25 No. 13 40.16 (1.581) No. 1 2x0.89 0.05(0.0350.002) 5.25 (0.206) 3.5 (0.138) 9.5 (0.374) 11 (0.433) A 1.5+0-0.1(0.059+0-0.004) 1.5 (0.060) 26.5 (1.043) 2.54 (0.1) 3.508 (0.138003) Section B-B 2 (0.079) No. 50 2.5 (0.098) 1.64 (0.065) 6.64 (0.261) 1.4 0.05(0.0550.002) 1.75 (0.069) 50.6 (1.992) 43.030.06 (1.2250.002) 1.27 (0.050) 0.79 0.05 (0.0310.002) 25 (0.984) 35.9 (1.413) 2 x 0.89 (0.035) Unit: mm (in.) PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 3 0.0 40.160.05 (1.5810.002) 46.130.15 (1.8160.006) 2x3 (0.079 x 0.118) 1.85+0-0.1 +0 (0.073-0.004 ) 3.5 (0.138) 47.10 -0 (1.854-0) 7.45 (0.293) 3 (0.118) 5.55 (0.219) 2 x 50.15 (0.1970.006) No.1 0.6350.03 (0.0250.001) 0.635 x (50 - 1) = 31.1150.05 (1.2250.002) 7 1. .001 ) 2 x .670 (0 20.15 (0.0790.006) No.25 No.13 7.6-0 3.0-0 (0.118-0) (0.299-0) 30.1 No.38 Component mounting prohibited area (.1180.004) 0.40.03 (0.0160.001) No.50 No.26 2x (0. 2. 08 2 0.0 7 0. 5 00 2 ) 3.50.05 (0.1380.002) 7.550.05 (0.2970.002) Recommended PCB pattern 20.5-0(0.807-0) 19 (0.749) 16 (0.630) B 1.8 (0.071) 1 (0.039) 4.5 (0.177) 1 (0.039) 0.6350.15 (0.0250.006) 2x4 (0.157) .2 2 6) 2 x .08 (0 31.1150.15 (1.2250.006) 4.5 (0.177) 40.16 (1.581) 1.25 (0.049) B 2.3 (0.090) The End of the P.C. Board Component mounting prohibited area Component with 1.1 mm (0.043 in.) or less height can be mounted. Unit: mm (in.) ORDERING PART NUMBER FCN-568H050-G/A4 Specifications subject to change Dimensions are in millimeters (inches) For above connector with ejector mechanism see page 9. www.fcai.fujitsu.com 8 560H Series (Compact Flash Connector) RIGHT-ANGLE PLUG, SMT TYPE (WITH EJECTOR, 1.64mm (0.065 in.) RAISED TYPE, TO BE MOUNTED ON BACK OF PC BOARD) DIMENSIONS 10.95 (0.431) Ejector mechanism (P/N FCN-560 HAD) 7.85 (0.309) 47.6 (1.874) Connector/Ejector Kit 5.5 (0.217) 23.8 (0.937) 28.6 (1.126) 10.65 (0.420) when card is ejected 17.4 (0.685) when card is inserted 6.75 (0.265) 27.3 (1.074) 7.34 (0.289) 4.05 (0.159) 29.95 (1.151) 1.84 (0.072) 1.5 (0.060) Unit: mm (in.) ORDERING PART NUMBER FCN-568H050-G/A4AD Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 9 560H Series (Compact Flash Connector) FCN-560H Series Connector PLUG (Guide) 26.75 (1.053) 10.95 (0.431) 10.65 (0.420) when card is ejected 28.6 (1.126) 23.8 (0.937) 17.4 (0.685) when card is inserted 6.75 (0.266) 47.6 (1.874) 5.5 (0.217) 7.85 (0.309) 4.05 (0.159) 5.5 (0.216) 29.25 (1.151) Part No: FCN-560HAC FCN-560 Series Connector PLUG (GUIDE) 23.8 (0.937) 28.6 (1.126) 5.5 (0.217) 10.95 (0.431) 10.65 (0.420) when card is ejected 17.4 (0.685) when card is inserted 6.75 (0.266) 47.6 (1.874) 27.3 (1.075) 7.85 (0.309) 4.05 (0.159) 5.5 (0.216) 29.25 (1.151) Part No: FCN-560HAD Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 10 560H Series (Compact Flash Connector) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 11