SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
1.6X1.26mm SMD CHIP LED LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APHFT1612PBASURKVGAC
Blue
Hyper Red
Green
Features
z1.6x1.26mm SMT LED, 0.52mm THICKNESS.
zLOW POWER CONSUMPTION.
zIDEAL FOR BACKLIGHT AND INDICATOR.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
zRoHS COMPLIANT.
Description
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN on
G-SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APHFT1612PBASURKVGAC
Blue (InGaN)
WATER CLEAR
18 60
Hyper Red (InGaAlP) 70 150
Green (InGaN) 70 180
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Hyper Red
Green
468
650
520
nm IF=20mA
λD [1] Dominant Wavelength
Blue
Hyper Red
Green
470
635
525
nm IF=20mA
Δλ1/2 Spectral Line Half-width
Blue
Hyper Red
Green
21
28
35
nm IF=20mA
C Capacitance
Blue
Hyper Red
Green
100
35
100
pF VF=0V;f=1MHz
VF [2] Forward Voltage
Blue
Hyper Red
Green
3.2
1.95
3.2
4
2.5
4
V IF=20mA
IR Reverse Current
Blue
Hyper Red
Green
10
10
10
uA VR=5V
Parameter Blue Hyper Red Green Units
Power dissipation 120 75 120 mW
DC Forward Current 30 30 30 mA
Peak Forward Current [1] 100 185 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
APHFT1612PBASURKVGAC
Blue
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
Hyper Red
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
Green
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
APHFT1612PBASURKVGAC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323
PACKING & LABEL SPECIFICATIONS APHFT1612PBASURKVGAC
