This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
17
4
Ceramic Trimmer Capacitors
TZC3 Series
■ Features
1. Small size with external dimension of 3.2(W)x
4.5(L)x1.6(H)mm (Cross slot type : 1.7(H)mm)
2. Color coded stator permits easy identification of
capacitance and reduces mounting errors.
3. Can be adjusted with conventional adjustment tools
having a thickness of 0.5mm.
4. Available for cross slot type to provide better
adjustability.
5. Providing mechanism to prevent air leak offers
better mountability with automatic mounter.
(Cross slot type)
6. Designed for automatic placement in surface mount
applications.
7. Heat resistant resin withstands reflow soldering
temperatures.
■ Applications
•Compact radios •Headphone stereos
•Pagers •Portable radio equipments
•Hybrid ICs •Cellular telephones
•Cordless telephones •Remote keyless entry systems
0.5
2.5 dia.
4.5
0.75
3.2
0.8
0.35
1.6
4.5
0.6 0.6
0.8
Tolerance:±0.1
in mm
Standard Type
ø2.5
4.5
0.6
0.5±0.05
Depth 0.4±0.05
1.7
0.6
0.75
0.8 3.2
Tolerance:±0.1
in mm
Cross Slot Type
Part Number Cmin.
(pF) Cmax.
(pF) TC Q Rated
Voltage Withstanding
Voltage Stator/Case Color
TZC3Z030Appp 1.4 max. 3.0 +50/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown
TZC3Z060Appp 2.0 max. 6.0 +50/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue
TZC3R100Appp 3.0 max. 10.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White
TZC3P200Appp 5.0 max. 20.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Red
TZC3P300Appp 6.5 max. 30.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Green
Insulation Resistance : 10000M ohm min. Torque : 1.5~10.0mNm Operating Temperature Range : -25~+85°C
The last three digits show the slot type. 110:standard(minus) type, 310:plus type.
■ Construction
Standard Type
Center axis
Rotor spring terminal
Ceramic plate
Stator
(One molded injection
with stator terminal)
Stator terminal
Cross Slot Type
Center axis
Rotor spring terminal
Ceramic plate
Stator
(One molded injection
with stator terminal)
Stator terminal
Continued on the following page.
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
18
4
Continued from the preceding page.
■ Temperature Characteristics
TZC3Z030
+8
+6
+4
+2
20
0
−10
−25 45 65 85
−2
−4
−6
−8
−10
−12
Temp.(˚C)
0
Z030 (NP0±300 ppm/˚C)
Cap.Change (%)
TZC3Z060
+8
+6
+4
+2
20
0
−10
−25 45 65 85
−2
−4
−6
−8
−10
−12
Temp.(˚C)
0
Z060 (NP0±300 ppm/˚C)
Cap.Change(%)
TZC3R100
+8
+6
+4
+2
0
−10
−25
45 65 85
−2
20
−4
−6
−8
−10
−12
Temp.(˚C)
0
R100 (N750±300 ppm/˚C)
Cap.Change(%)
TZC3P200
+8
+6
+4
+2
0
0
–10
–25
45 65 85
–2
–4
–6
–8
–10
–12
Temp.(°C)
20
P200 (N1200±500ppm/°C)
Cap.Change (%)
■ Frequency Characteristics
TZC3Z030
Z030
1000
100
Q
100 500 1000 1500
Frequency (MHz)
2000
10
1
1000
100
10
Capacitance (pF)
TZC3Z060
Z060
Q
1000
100
100 500 2000
15001000
Frequency (MHz)
10
1
1000
100
10
Capacitance (pF)
Continued on the following page.
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
19
4
Continued from the preceding page.
■ Frequency Characteristics
TZC3R100
R100
Q
1000
100
200 600400 800 1000
Frequency (MHz)
10
1
1000
100
10
Capacitance (pF)
TZC3P200
P200
Q
1000
100
200 1000600 800400
Frequency(MHz)
10
1
1000
100
10
Capacitance (pF)
■ Land Pattern
Standard Type
5.0 +0
−0.5
3.3±0.1
1.0±0.1
Tolerance:±0.1
in mm
Cross Slot Type
5.0 +0
−0.5
3.3±0.1
1.0±0.1
Tolerance:±0.1
in mm
■ Temperature Profile
230
183
100
020 sec. max.
60 sec. to 120 sec.
(Solder melting zone)
Preheating (in air)
Gradual Cooling
(in air)
Solderring
Temperature (°C)
Continued on the following page.
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
20
4
Continued from the preceding page.
■ Standard Type Screwdriver and Screwdirver Bit
Screwdriver for Manual Adjustment
Murata Part No. : KMDR010
Please use the following recommended screwdriver.
You can order this driver with below part number.
Though you can also adjust the capacitance value by
commercial products, please use one which has the same
head size as the below driver.
(in mm) (in mm)
Screwdriver Bit for Automatic Adjustment
Murata Part No. : KMBT010
30
2.2 dia.
Bit shape ; Minus (2.2×0.4)
50
122
20
Bit shape ; Minus (2.2×0.4)
■ Cross Slot Type Screwdriver and Screwdirver Bit
Screwdriver for Manual Adjustment
Murata Part No. : KMDR040
Please use the following recommended screwdriver.
You can order this driver with below part number.
Though you can also adjust the capacitance value by
commercial products, please use one which has the same
head size as the below driver.
(in mm) (in mm)
TORAY INDUSTRIES,INC. SA-1825 TORAY INDUSTRIES,INC. JB-1825
Screwdriver Bit for Automatic Adjustment
Murata Part No. : KMBT040
13
120
Bit shape ; Minus (1.8×0.45)
25 5
1.8 dia.
Bit shape ; Minus (1.8×0.45)
■ Notice (Storage and operating condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40°C and 30 to 85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of deliverly.
5. Open the package just before using.
6. Prior to storing previously opened packages, the
packaging should be heat-sealed. Avoid using rubber
bands for repackage.
7. Do not store under direct sunlight.
8. Do not use the trimmer capacitor under the conditions
listed below.
• Corrosive gasses atmosphere (Ex. Cl2, H2S, NH3,
SO2, NOx, etc.)
• In liquid (Ex. water, oil, medical liquid,
organic solvent, etc.)
• Dusty / dirty atmosphere
• Direct sunlight
• Static voltage nor electric/magnetic fields
• Direct sea breeze
• Other variations of the above
■ Notice (Soldering)
1. Soldering
(1)TZC3 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2)Standard soldering condition
(a)Reflow soldering : Refer to the standard
temperature profile.
(b)Soldering iron:
>Temperature of tip 260±10°C
>Soldering time 3 sec. max.
>Diameter 1mm max.
>Wattage of iron 20W max.
Continued on the following page.
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
21
4
Continued from the preceding page.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(3)The amount of solder is critical.
(4)The thickness of solder paste should be printed
from 150µm to 200µm and the dimension of land
pattern should be used Murata's standard land
pattern at reflow soldering. Insufficient amounts
of solder can lead to insufficient soldering
strength on PCB. Excessive amounts of solder may
cause the bridging between the terminals or the
contact failure due to flux wicking up.
(5)When using soldering iron, the diameter of the
string solder shall be less than 0.5mm. The string
solder shall be applied to the lower part of the
terminal only and do not apply flux except the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the terminal
may cause fixed metal rotor or the contact failure
due to flux invasion into the movable part and/or
the contact point. The soldering iron should not
come in contact with the stator of the trimmer
capacitor. If such contact does occur, the trimmer
capacitor may be damaged.
(6)Our recommendable chlorine content of solder is
as follows.
(a)Solder paste: 0.2wt% max.
(b)String solder: 0.5wt% max.
(7)Do not use water-soluble flux (for water cleaning).
To prevent the deterioration of trimmer capacitor
characteristics, apply flux only to terminals.
(8)When soldering the TZC3 series, the solder should
not flow into the staking part of the substrate.
If such flow does occur, driver slot rotation will
be damaged.
2. Mounting
(1)Do not apply excessive force (preferable 5.0N
(Ref.; 500gf)max.), when the trimmer capacitor is
mounted on the PCB.
(2)Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3)Use the suitable dimension of the pick-up nozzle.
(2.5mm external diameter and 1.5mm bore diameter.)
3. Cleaning
Can not be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
Standard type --> MURATA : KMDR010
Cross slot type --> TORAY : SA-1825
(Murata P/N is KMDR040)
(2) Recommended screwdriver bit
for automatic adjustment
Standard type --> MURATA : KMBT010
Cross slot type --> TORAY : JB-1825
(Murata P/N is KMBT040)
2. When adjusting with a screwdriver, do not apply
excessive force(preferable 1.0N(Ref;100gf) max.) to
minimize capacitance drift. If excessive force
applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
1. Before using trimmer capacitor, please test after
assembly in your particular mass production system.
2. MURATA cannot guarantee trimmer capacitor integrity
when used under conditions other than those
specified in this document.
3. We have an application manual for trimmer capacitor.
(Only for chip type) If you need it, please feel
free to contact us.
t
A
y
001
q
TZ
u
R00
r
200
e
R
w
Y2
2
(Global Part Number)
qProduct ID
TZ Trimmer Capacitors
Product ID
rMaximum Capacitance
Expressed by three figures. The unit is pico-farad(pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
If there is a decimal point, it is expressed by the capital letter "R".
In this case, all figures are significant digits.
Ceramic Trimmer Capacitors
tTerminal Shape
Code Terminal Shape
A
B
C
D
E
F
N
T
Y
Top Adjustment;
Top Adjustment;
Rear Adjustment;
Top Adjustment;
Rear Adjustment;
Top Adjustment;
Rear Adjustment;
Top Adjustment;
Rear Adjustment;
Top Adjustment;
Side Adjustment;
TZS2,TZY2,
TZV2,TZC3,TZB4 (Chip Type)
TZB4 (Chip Type),
TZ03 (Lead Type)
TZB4 (Lead Type)
TZB4 (Lead Type)
TZ03 (Lead Type),
TZB4 (Chip Type)
TZ03 (Lead Type)
TZ03 (Lead Type)
TZ03 (Taping Type)
TZ03 (Lead Type)
uPackaging
Code
A00
B00
M00
R00
R01
Ammo Pack (Radial Taping)
Bulk
Magazine
Reel (Taping ø180mm)
Reel (Taping ø330mm)
Packaging
wSeries/Terminal
Code
03
B4
C3
S2
Y2
V2
6mm Size Lead Type
4mm Size Chip/Lead Type
3mm Size Chip Type
2mm Size Chip Type (Height 1.0mm)
2mm Size Chip Type (Height 1.25mm)
2mm Size Chip Type (Height 1.45mm)
Series/Terminal
eTemperature Characteristics
Code
Z
S
N
T
R
K
P
NP0 ppm/°C
N150ppm/°C
N200ppm/°C
N450ppm/°C
N750ppm/°C
N1000ppm/°C
N1200ppm/°C
Temperature Characteristics
Please refer to dimensions for terminals in detail.
yIndividual Specification
Code
001
110
169
310
A10
B10
TZS2,TZY2 Standard Type
TZV2,TZC3 (Minus Slot) Standard Type
TZ03 Standard Type
TZC3 (Plus Slot) Standard Type
TZB4 No-cover Film Standard Type
TZB4 with Cover Film Standard Type
Individual Specifications
Please refer to ratings for tolerance of temperature characteristics.
o Part Numbering The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.
()
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
Packaging
35
6
■ Minimum Quantity
Part Number
TZS2
TZY2
TZV2
TZC3
TZB4
TZ03
3000
2000
2000
1000
500
-
φ180mm Reel
10000
10000
8000
4000
2500
-
φ330mm Reel
-
-
-
-
-
1000
Ammo Pack
-
-
-
-
-
80
Magazine
500
500
500
500
500
1000∗
Bulk
Minimum Quantity (pcs.)
∗Depending on terminal shape, some products are supplied on the 500pcs./bulk basis.
■ Dimension of Tape
TZS02 Series
4.0±0.1
8.0±0.3
2.0±0.1
4.0±0.1 1.5 -0 dia.
+0.1
3.0±0.2
1.75±0.1
3.5±0.1
2.5±0.2
1.25±0.2
0.25±0.1
(in mm)
TZY2/TZV2 Series
1.5+0.1
− 0dia. 2.0 4.0
A
A2.7±0.2
4.0
3.5
0.25 t
8.0±0.2
1.75
A-Across
section
t=TZY2 (TZVY2) : 1.6±0.2
TZV2 (TZV02) : 1.9±0.2
3.6±0.2
Tolerance:±0.1
in mm
TZC3 Series
1.5+0.1
− 0dia.
4.9±0.2
A
2
8
4
5.5 1.75
12±0.3
0.3
2.0±0.2
A
A-Across
section
Tolerance:±0.1
in mm
3.6±0.2
TZB4 Series
1.5+0.1
− 0dia.
8.0 2.0 4 .0
A
A1.8
4.3
3.55±0.2
4.8
7.5
5.5
12.0±0.3
0.3±0.1
A-Across
section
Direction of feed
Tolerance:±0.1
in mm
1.75
■ Dimension of dia 178mm Reel
TZS2/TZY2/TZV2 Series
(in mm)
21±0.8 dia.
50 min.
178±2 dia.
13±0.5 dia.
2±0.5
2±0.5
9±1.5
TZC3/TZB4 Series
(in mm)
21±0.8 dia.
50 min.
178±2 dia.
13±0.5 dia.
2±0.5
2±0.5
14±1.5
This is the PDF file of catalog No.T13E-5 T13E5.pdf 01.5.29
Packaging
36
6
■ Dimension of dia 330mm Reel
TZS2/TZY2/TZV2 Series
(in mm)
21±0.8 dia.
50 min.
330±2 dia.
13±0.5 dia.
2±0.5
2±0.5
9.5±1.5
TZC3/TZB4 Series
(in mm)
21±0.8 dia.
50 min.
330±2 dia.
13±0.5 dia.
2±0.5
2±0.5
14±1.5
■ Dimension of Tape
TZ03 Series
12.7 6.35±1.30±1.5
ø0.6±0.1
9.0±0.5
10.0 max. 1.5±1.5
ø4.0±0.1 12.7±0.3 1.7 max.
1.3±0.5
1.5 max. 1.5 max.
18.0±0.5
3.85±0.7
5.0+0.8
−0.2
18.0±0.5
∗1
∗2
∗1 : Tolerance varies with ∆S.
∗2 : Except 1mm from the stand-off position. (in mm)
■ Ammo Pack
TZ03 Series
