TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 FEATURES APPLICATIONS * * * * * * * * * * * * 1 * Specified Break-Before-Make Switching Low ON-State Resistance High Bandwidth Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.5-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) Cell Phones PDAs Portable Instrumentation SC-70 (DCU) PACKAGE (TOP VIEW) TS5A3357 NO0 1 NO1 2 7 COM NO2 3 6 IN1 5 IN2 GND 4 Logic Control 8 V+ FUNCTION TABLE IN1 IN2 COM TO NO0 COM TO NO1 COM TO NO2 L L OFF OFF OFF H L ON OFF OFF L H OFF ON OFF H H OFF OFF ON Summary of Characteristics (1) DESCRIPTION/ORDERING INFORMATION The TS5A3357 is a high-performance, single-pole triple throw (SP3T) analog switch that is designed to operate from 1.65 V to 5.5 V. The device offers a low ON-state resistance and low input/output capacitance and, thus, causes a very low signal distortion. The break-before-make feature allows transferring of a signal from one port to another, with a minimal signal distortion. This device also offers a low charge injection which makes this device suitable for high-performance audio and data acquisition systems. Configuration Triple 3:1 Multiplexer/ Demultiplexer (1 x SP3T) Number of channels 1 5 ON-state resistance (ron) ON-state resistance match (ron) ON-state resistance flatness (ron(flat)) 0.1 6.5 Turn-on/turn-off time (tON/tOFF) 6.5 ns/3.7 ns Break-before-make time (tBBM) 0.5 ns Charge injection (QC) Bandwidth (BW) 3.4 pC 334 MHz OFF isolation (OISO) -82 dB at 10 MHz Crosstalk (XTALK) -62 dB at 10 MHz Total harmonic distortion (THD) Leakage current (ICOM(OFF)) Package option (1) 0.05% 1 A 8-pin DCU (US8) V+ = 5 V, TA = 25C 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2004-2007, Texas Instruments Incorporated TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ORDERING INFORMATION TA PACKAGE -40C to 85C (1) (2) (3) SOT (SC-70) - DCU (1) (2) ORDERABLE PART NUMBER Tape and reel TS5A3357DCUR TOP-SIDE MARKING (3) JA9_ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. DCU: The actual top-side marking has one additional character that designates the assembly/test site. ABSOLUTE MINIMUM AND MAXIMUM RATINGS (1) (2) over operating free-air temperature range (unless otherwise noted) Supply voltage range (3) VNO VCOM Analog voltage range (3) (4) (5) IK Analog port diode current VNO, VCOM < 0 or VNO, VCOM > V+ INO ICOM On-state switch current VNO, VCOM = 0 to V+ VI Digital input voltage range (3) (4) IIK Digital input clamp current I+ Continuous current through V+ IGND Continuous current through GND Tstg Storage temperature range V+ (1) (2) (3) (4) (5) VI < 0 MIN MAX -0.5 6.5 V -0.5 V+ + 0.5 V -50 50 mA -100 100 mA -0.5 6.5 V -50 UNIT mA 100 mA -100 100 mA -65 150 C Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 5.5 V maximum. PACKAGE THERMAL IMPEDANCE JA (1) 2 Package thermal impedance (1) MAX UNIT 165 C/W The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO Peak ON resistance rpeak 0 0 VNO V+, ICOM = -30 mA, Switch ON, See Figure 13 VNO = 0, ICOM = 30 mA ON-state resistance ron VNO = 2.4 V, ICOM = -30 mA Full 4.5 V 25C VNO = 4.5 V, ICOM = -30 mA 25C Full V 15 5 7 6 12 Full Switch ON, See Figure 13 V+ 7 4.5 V 12 25C 7 Full 15 15 ON-state resistance match between channels ron VNO = 3.15 V, ICOM = -30 mA, Switch ON, See Figure 13 25C 4.5 V 0.1 ON-state resistance flatness ron(flat) 0 VNO V+, ICOM = -30 mA, Switch ON, See Figure 13 25C 5V 6.5 NO OFF leakage current INO(OFF) VNO = 0 to V+, VCOM = V+ to 0 Switch OFF, See Figure 14 25C COM OFF leakage current ICOM(OFF) VCOM = 0 to V+, VNO = V+ to 0, Switch OFF, See Figure 14 25C NO ON leakage current INO(ON) VNO = 0 to V+, VCOM = Open, Switch ON, See Figure 14 25C COM ON leakage current ICOM(ON) VNO = Open, VCOM = 0 to V+, Switch ON, See Figure 14 25C Full 5.5 V 0 Full Full Full 5.5 V 5.5 V -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 A A A A Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V Input leakage current IIH, IIL (1) (2) VI = 5.5 V or 0 25C Full 5.5 V 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 3 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (continued) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VNO = V+ or GND, CL = 50 pF, RL = 500 , See Figure 16 25C 5V 1.5 6.5 Full 4.5 V to 5.5 V 1.5 7 Turn-off time tOFF VNO = V+ or GND, CL = 50 pF, RL = 500 , See Figure 16 25C 5V 0.8 3.7 Full 4.5 V to 5.5 V 0.8 7 Break-beforemake time tBBM VNO = V+, RL = 50 , CL = 50 pF, See Figure 17 25C 5V 0.5 Full 4.5 V to 5.5 V 0.5 VGEN = 0, CL = 0.1 nF, See Figure 21 25C 5V 3.4 pC Charge injection QC ns ns ns NO OFF capacitance CNO(OFF) VNO = V+ or GND, See Figure 15 Switch OFF, 25C 5V 4.5 pF COM OFF capacitance CCOM(OFF) VNO = V+ or GND, See Figure 15 Switch OFF, 25C 5V 10.5 pF NO ON capacitance CNO(ON) VNO = V+ or GND, See Figure 15 Switch ON, 25C 5V 17 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 15 25C 5V 17 pF VI = V+ or GND, See Figure 15 25C 5V 3 pF Digital input capacitance CI Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 4.5 V to 5.5 V 334 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 4.5 V to 5.5 V -82 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 4.5 V to 5.5 V -62 dB VI = V+ or GND, Switch ON or OFF Supply Positive supply current 4 I+ 25C Full 5.5 V Submit Documentation Feedback 1 10 A Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO Peak ON resistance rpeak 0 0 VNO V+, ICOM = -24 mA, VNO = 0 V, ICOM = 24 mA ON-state resistance ron VNO = 3 V, ICOM = -24 mA Switch ON, See Figure 13 Full 3V 25C Switch ON, See Figure 13 Full 25C V+ V 25 6.5 9 9 20 9 3V Full 20 ON-state resistance match between channels ron VNO = 2.1 V, ICOM = -24 mA, Switch ON, See Figure 13 25C 3V 0.1 ON-state resistance flatness ron(flat) 0 VNO V+, ICOM = -24 mA, Switch ON, See Figure 13 25C 3.3 V 13.5 NO OFF leakage current INO(OFF) VNO = 0 to V+, VCOM = V+ to 0 Switch OFF, See Figure 14 25C COM OFF leakage current ICOM(OFF) VCOM = 0 to V+, VNO = V+ to 0, Switch OFF, See Figure 14 25C NO ON leakage current INO(ON) VNO = 0 to V+, VCOM = V+ to 0, Switch ON, See Figure 14 25C COM ON leakage current ICOM(ON) VNO = Open, VCOM = 0 to V+, Switch ON, See Figure 14 25C Full Full Full Full 3.6 V 3.6 V 3.6 V 3.6 V -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 A A A A Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V 25C -1 0.1 Input leakage current (1) (2) IIH, IIL VI = 5.5 V or 0 Full 3.6 V 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 5 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT 25C 3.3 V 2 9.5 Full 3 V to 3.6 V 2 11 25C 3.3 V 1.3 5.1 Full 3 V to 3.6 V 1.5 5.5 Dynamic Turn-on time tON VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Turn-off time tOFF VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Break-beforemake time tBBM VNO = V+, RL = 50 , CL = 50 pF, See Figure 17 25C 3.3 V 0.5 Full 3 V to 3.6 V 0.5 Charge injection QC VGEN = 0, CL = 0.1 nF, See Figure 21 25C 3.3 V 1.75 pC CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 15 25C 3.3 V 4.5 pF VNO = V+ or CCOM(OFF) GND, Switch OFF, See Figure 15 25C 3.3 V 10.5 pF VNO = V+ or GND, Switch ON, See Figure 15 25C 3.3 V 17 pF VCOM = V+ or GND, Switch ON, See Figure 15 25C 3.3 V 17 pF VI = V+ or GND, See Figure 15 25C 3.3 V 3 pF NO OFF capacitance COM OFF capacitance NO ON capacitance CNO(ON) COM ON capacitance CCOM(ON) Digital input capacitance CI ns ns ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 3 V to 3.6 V 327 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 3 V to 3.6 V -82 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 3 V to 3.6 V -62 dB VI = V+ or GND, Switch ON or OFF Supply Positive supply current 6 I+ 25C Full Submit Documentation Feedback 3.6 V 1 10 A Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range Peak ON resistance ON-state resistance ON-state resistance match between channels VCOM, VNO rpeak 0 0 VNO V+, ICOM = -8 mA, VNO = 0 V, ICOM = 8 mA ron VNO = 2.3 V, ICOM = -8 mA Switch ON, See Figure 13 Full 2.3 V 25C Switch ON, See Figure 13 Full 25C 8 V+ V 50 12 12 2.3 V 11 Full 30 30 ron VNO = 1.8 V, ICOM = -8 mA, Switch ON, See Figure 13 25C 2.3 V 0.3 ron(flat) 0 VNO V+, ICOM = -8 mA, Switch ON, See Figure 13 25C 2.5 V 39 NO OFF leakage current INO(OFF) VNO = 0 to V+, VCOM = V+ to 0 Switch OFF, See Figure 14 COM OFF leakage current ICOM(OFF) VCOM = 0 to V+, VNO = V+ to 0, Switch OFF, See Figure 14 NO ON leakage current INO(ON) VNO = 0 to V+, VCOM = V+ to 0, Switch ON, See Figure 14 COM ON leakage current ICOM(ON) VNO = Open, VCOM = 0 to V+, Switch ON, See Figure 14 ON-state resistance flatness 25C Full 2.7 V 25C Full 2.7 V 25C Full 2.7 V 25C Full 2.7 V -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 A A A A Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Full V+ x 0.75 5.5 V Input logic low VIL Full 0 V+ x 0.25 V Input leakage current (1) (2) IIH, IIL VI = 5.5 V or 0 25C Full 2.7 V 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 7 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT 25C 2.5 V 3 15 Full 2.3 V to 2.7 V 3 16.5 25C 2.5 V 2 7.2 Full 2.3 V to 2.7 V 2 7.8 Dynamic Turn-on time tON VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Turn-off time tOFF VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Break-beforemake time tBBM VNO = V+, RL = 50 , CL = 50 pF, See Figure 17 25C 2.5 V 0.5 Full 2.3 V to 2.7 V 0.5 Charge injection QC VGEN = 0, CL = 0.1 nF, See Figure 21 25C 2.5 V 1.15 pC CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 15 25C 2.5 V 4.5 pF VNO = V+ or CCOM(OFF) GND, Switch OFF, See Figure 15 25C 2.5 V 10.5 pF VNO = V+ or GND, Switch ON, See Figure 15 25C 2.5 V 17 pF VCOM = V+ or GND, Switch ON, See Figure 15 25C 2.5 V 17 pF VI = V+ or GND, See Figure 15 25C 2.5 V 3 pF NO OFF capacitance COM OFF capacitance NO ON capacitance CNO(ON) COM ON capacitance CCOM(ON) Digital input capacitance CI ns ns ns Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 2.3 V to 2.7 V 320 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 2.3 V to 2.7 V -81 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 2.3 V to 2.7 V -61 dB VI = V+ or GND, Switch ON or OFF Supply Positive supply current 8 I+ 25C Full 2.7 V Submit Documentation Feedback 1 10 A Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range Peak ON resistance ON-state resistance ON-state resistance match between channels VCOM, VNO rpeak 0 0 VNO V+, ICOM = -4 mA, VNO = 0 V, ICOM = 4 mA ron VNO = 1.8 V, ICOM = -4 mA Switch ON, See Figure 13 Full 1.65 V 25C Switch ON, See Figure 13 Full 25C 10 V+ V 150 20 20 1.65 V 17 Full 50 50 ron VNO = 1.15 V, ICOM = -4 mA, Switch ON, See Figure 13 25C 1.65 V 0.3 ron(flat) 0 VNO V+, ICOM = -4 mA, Switch ON, See Figure 13 25C 1.8 V 140 NO OFF leakage current INO(OFF) VNO = 0 to V+, VCOM = V+ to 0 Switch OFF, See Figure 14 COM OFF leakage current ICOM(OFF) VCOM = 0 to V+, VNO = V+ to 0, Switch OFF, See Figure 14 NO ON leakage current INO(ON) VNO = 0 to V+, VCOM = V+ to 0, Switch ON, See Figure 14 COM ON leakage current ICOM(ON) VNO = Open, VCOM = 0 to V+, Switch ON, See Figure 14 ON-state resistance flatness 25C Full 1.95 V 25C Full 1.95 V 25C Full 1.95 V 25C Full 1.95 V -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 -0.1 0.1 -1 1 A A A A Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Full V+ x 0.75 5.5 V Input logic low VIL Full 0 V+ x 0.25 V Input leakage current (1) (2) IIH, IIL VI = 5.5 V or 0 25C Full 1.95 V 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 9 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Turn-off time tOFF VNO = V+ or GND, RL = 500 , CL = 50 pF, See Figure 16 Break-beforemake time tBBM VNO = V+, RL = 50 , CL = 50 pF, See Figure 17 VGEN = 0, CL = 0.1 nF, Charge injection QC 25C 1.8 V 5 32 Full 1.65 V to 1.95 V 5 34 25C 1.8 V 3 14 Full 1.65 V to 1.95 V 3 14.5 ns ns 25C 1.8 V 0.5 Full 1.65 V to 1.95 V 0.5 See Figure 21 25C 1.8 V 0.3 pC ns NO OFF capacitance CNO(OFF) VNO = V+ or GND, Switch OFF, See Figure 15 25C 1.8 V 4.5 pF COM OFF capacitance CCOM(OFF) VNO = V+ or GND, Switch OFF, See Figure 15 25C 1.8 V 10.5 pF NO ON capacitance CNO(ON) VNO = V+ or GND, Switch ON, See Figure 15 25C 1.8 V 17 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, See Figure 15 Switch ON, 25C 1.8 V 17 pF VI = V+ or GND, See Figure 15 25C 1.8 V 3 pF Digital input capacitance CI Bandwidth BW RL = 50 , Switch ON, See Figure 18 25C 1.65 V to 1.95 V 341 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 19 25C 1.65 V to 1.95 V -81 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 20 25C 1.65 V to 1.95 V -61 dB VI = V+ or GND, Switch ON or OFF Supply Positive supply current 10 I+ 25C Full 1.95 V Submit Documentation Feedback 1 10 A Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 TYPICAL PERFORMANCE C C C C Figure 1. ron vs VCOM Figure 2. ron vs VCOM (V+ = 3 V) C C C Figure 3. ron vs VCOM (V+ = 4.5 V) Figure 4. Leakage Current vs Temperature (V+ = 5.5 V) Figure 5. Charge Injection (QC) vs VCOM Figure 6. tON and tOFF vs V+ Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 11 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 TYPICAL PERFORMANCE (continued) C 12 Figure 7. tON and tOFF vs Temperature (V+ = 5 V) Figure 8. Logic-Level Threshold vs V+ Figure 9. Frequency Response (V+ = 3 V) Figure 10. OFF Isolation and Crosstalk vs Frequency (V+ = 3 V) Figure 11. Total Harmonic Distortion vs Frequency (V+ = 5 V) Figure 12. Power-Supply Current vs Temperature (V+ = 5 V) Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 PIN DESCRIPTION PIN NO. NAME 1 NO0 Normally open DESCRIPTION 2 NO1 Normally open 3 NO2 Normally open 4 GND Digital ground 5 IN2 Digital control to connect COM to NO 6 IN1 Digital control to connect COM to NO 7 COM 8 V+ Common Power supply PARAMETER DESCRIPTION SYMBOL VCOM VNO ron DESCRIPTION Voltage at COM Voltage at NO Resistance between COM and NC or COM and NO ports when the channel is ON rpeak Peak on-state resistance over a specified voltage range ron Difference of ron between channels in a specific device ron(flat) Difference between the maximum and minimum value of ron in a channel over the specified range of conditions INO(OFF) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state INO(ON) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output (COM) open ICOM(ON) Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state and the output (NC or NO) open ICOM(OFF) Leakage current measured at the COM port during the power-down condition, V+ = 0 VIH Minimum input voltage for logic high for the control input (IN) VIL Maximum input voltage for logic low for the control input (IN) VI Voltage at the control input (IN) IIH, IIL Leakage current measured at the control input (IN) tON Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning ON. tOFF Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning OFF. tBBM Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation delay between the output of two adjacent analog channels (NC and NO) when the control signal changes state. QC Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NO or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input. Charge injection, QC = CL x VCOM, CL is the load capacitance and VCOM is the change in analog output voltage. CNO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF CNO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON CCOM(ON) Capacitance at the COM port when the corresponding channel (COM to NO) is ON CCOM(OFF) Capacitance at the COM port when the corresponding channel (COM to NO) is OFF CI Capacitance of control input (IN) OISO OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency, with the corresponding channel (NC to COM or NO to COM) in the OFF state. XTALK Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to NC). This is measured in a specific frequency and in dB. BW I+ Bandwidth of the switch. This is the frequency in which the gain of an ON channel is -3 dB below the DC gain. Static power-supply current with the control (IN) pin at V+ or GND Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 13 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION Figure 13. ON-State Resistance (ron) OFF-State Leakage Current ON-State Leakage Current Figure 14. ON- and OFF-State Leakage Current (ICOM(ON), ICOM(OFF), INO(ON), INO(OFF)) Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. Figure 15. Capacitance (CI, CCOM(ON), CNO(OFF), CCOM(OFF), CNO(ON)) 14 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) x VOH x VOH + 0.3 V x VOL x V VOH - 0.3 V OH A. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 16. Turn-On (tON) and Turn-Off Time (tOFF) tr = < 2.5 ns tf = < 2.5 ns VOH A. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 17. Break-Before-Make Time (tBBM) Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 15 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) Channel ON: NO0 to COM Network Analyzer Setup Source Power = 0 dBM DC Bias = 350 mV Figure 18. Bandwidth (BW) Channel OFF: NO0 to COM Network Analyzer Setup Source Power = 0 dBM DC Bias = 350 mV Figure 19. OFF Isolation (OISO) Channel OFF: NO0 to COM Channel ON: NO0-NO1 to COM Network Analyzer Setup Source Power = 0 dBM DC Bias = 350 mV Figure 20. Crosstalk (XTALK) 16 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 TS5A3357 SINGLE 5- SP3T ANALOG SWITCH 5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS177A - OCTOBER 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) x A. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 21. Charge Injection (QC) Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3357 17 PACKAGE MATERIALS INFORMATION www.ti.com 6-May-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS5A3357DCUR Package Package Pins Type Drawing US8 DCU 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 3000 180.0 8.4 Pack Materials-Page 1 2.25 B0 (mm) K0 (mm) P1 (mm) 3.35 1.05 4.0 W Pin1 (mm) Quadrant 8.0 Q3 PACKAGE MATERIALS INFORMATION www.ti.com 6-May-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3357DCUR US8 DCU 8 3000 202.0 201.0 28.0 Pack Materials-Page 2 MECHANICAL DATA MPDS049B - MAY 1999 - REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM CCCCC CCCCC CCCCC CCCCC 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0 - 8 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion Falls within JEDEC MO-187 variation DA. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated