TPS3836 TPS3837 TPS3838 www.ti.com SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 NanoPower Supervisory Circuits Check for Samples: TPS3836, TPS3837, TPS3838 FEATURES DESCRIPTION * * The TPS3836, TPS3837, and TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. 1 23 * * * * * Supply Current: 220 nA (typical) Precision Supply Voltage Supervision Range: 1.8 V, 2.5 V, 3.0 V, and 3.3 V Power-On Reset Generator With Selectable Delay Time: 10 ms or 200 ms Push/Pull RESET Output (TPS3836), Push/Pull RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset SOT23-5 and 2x2 SON-6 Packages Temperature Range: -40C to +85C APPLICATIONS * * * * * * * Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable- and Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430TM blank blank TPS3838DRV 2mm x 2mm SON-6 (TOP VIEW) VDD 1 GND 2 RESET 3 6 CT GND 5 N/C 1 GND 2 MR 3 (1) 5 4 When CT is connected to GND, a fixed delay time of typical 10 ms is asserted. When connected to VDD, the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider. The TPS3836 has an active-low, push-pull RESET output. The TPS3837 has an active-high, push-pull RESET, and the TPS3838 integrates an active-low, open-drain RESET output. The product spectrum is designed for supply voltages of 1.8 V, 2.5 V, 3.0 V, and 3.3 V. The circuits are available in either a SOT23-5 or 2x2 SON-6 package. The TPS3836, TPS3837, and TPS3838 families are characterized for operation over a temperature range of -40C to +85C. (1) 4 MR TPS3836K33 VDD TPS3837 DBV PACKAGE (TOP VIEW) TPS3836, TPS3838 DBV PACKAGE (TOP VIEW) CT During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output active as long as VDD remains below the threshold voltage of VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT. CT RESET VDD RESET CT 1 GND 2 MR 3 N/C: Not connected. 5 VDD RST MR T 4 MSP430 VCC GND Lithium Battery 3.6 V VSS RESET Typical Application Circuit 1 2 3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. MSP430 is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2000-2010, Texas Instruments Incorporated TPS3836 TPS3837 TPS3838 SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. Table 1. ORDERING INFORMATION (1) (1) (2) PRODUCT NOMINAL SUPPLY VOLTAGE THRESHOLD VOLTAGE (VIT) (2) TPS383xE18 1.8 V 1.71 V TPS383xJ25 2.5 V 2.25 V TPS383xH30 3.0 V 2.79 V TPS383xL30 3.0 V 2.64 V TPS383xK33 3.3 V 2.93 V For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Custom threshold voltages are available. Minimum order quantities apply. Contact factory for details and availability. ABSOLUTE MAXIMUM RATINGS (1) Over operating free-air temperature range, unless otherwise noted. Supply voltage, VDD All other pins (2) (2) (3) TPS383xx UNIT 7 V -0.3 to 7 V 5 mA Maximum high output current, IOH -5 mA Input clamp current, IIK (VI < 0 or VI > VDD) 10 mA 10 mA Maximum low output current, IOL Output clamp current, IOK (VO < 0 or VO > VDD) Continuous total power dissipation See Dissipation Ratings Table Operating temperature range, TA -40 to +85 C Storage temperature range, TSTG -65 to +150 C +260 C Soldering temperature (1) (2) (3) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to GND. If RESET or RESET are pulled above VDD, the internal ESD structure will present an effective 1.5 k resistor between these pins, causing leakage current to flow into the RESET or RESET pin. DISSIPATION RATINGS PACKAGE TA < +25C POWER RATING DERATING FACTOR ABOVE TA = +25C TA = +70C POWER RATING TA = +85C POWER RATING DBV 437 mW 3.5 mW/C 280 mW 227 mW DRV Low-K (1) 715 mW 7.1 mW/C 395 mW 285 mW 1540 mW 15.4 mW/C 845 mW 615 mW DRV High-K (1) (2) 2 (2) The JEDEC low-K (1s) board used to derive this data was a 3in x 3in, two-layer board with 2-ounce copper traces on top of the board. The JEDEC high-K (2s2p) board used to derive this data was a 3in x 3in, multilayer board with 1-ounce internal power and ground planes and 2-ounce copper traces on the top and bottom of the board. Submit Documentation Feedback Copyright (c) 2000-2010, Texas Instruments Incorporated TPS3836 TPS3837 TPS3838 www.ti.com SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 RECOMMENDED OPERATING CONDITIONS Supply voltage, VDD MIN MAX 1.6 6 V 0 VDD + 0.3 V Voltage range, CT, MR, RESET, and RESET pins High-level input voltage, VIH UNIT 0.7 x VDD Low-level input voltage, VIL V 0.3 x VDD Input transition rise and fall rate at MR, t/V Operating temperature range, TA -40 V 100 ns/V +85 C VPull-up Pull-up resistor value, RESET pin (TPS3838 only) 50 A ELECTRICAL CHARACTERISTICS Over recommended operating conditions, unless otherwise noted. PARAMETER VOH High-level output voltage VOL Low-level output voltage Power-up reset voltage (1) TEST CONDITIONS RESET (TPS3836) VDD = 3.3 V, IOH = -2 mA RESET (TPS3837) VDD = 1.8 V, IOH = -1 mA RESET (TPS3836, TPS3838) VDD = 1.8 V, IOL = 1 mA RESET (TPS3837) VDD = 3.3 V, IOL = 2 mA TPS3836, TPS3838 VDD 1.1 V, IOL = 50 mA TPS3837 VDD 1.1 V, IOL = -50 mA VDD = 6 V, IOH = -3 mA TPS383xJ25 Negative-going input threshold TPS383xH30 (2) voltage TPS383xL30 Hysteresis at VDD input IIH High-level input current IIL Low-level input current IOH High-level output current IDD (3) CT MR (3) CT TPS3838 Supply current TA = -40C to +85C (1) (2) (3) Input capacitance at MR and CT V 0.4 V 0.2 V 0.8 x VDD V 1.66 1.71 1.74 2.18 2.25 2.29 2.70 2.79 2.85 2.56 2.64 2.69 2.84 2.93 2.99 1.7 V < VIT < 2.5 V 30 2.5 V < VIT < 3.5 V 40 -40 CT = VDD = 6 V -25 MR = 0 V, VDD = 6 V -130 CT = 0 V, VDD = 6 V -25 -60 -200 VDD = VIT + 0.2 V, VOH = VDD mV -100 mA +25 nA -340 mA +25 nA 25 nA VDD > VIT, VDD < 3 V 220 400 VDD > VIT, VDD > 3 V 250 450 VDD < VIT 10 15 VI = 0 V to VDD V 50 MR = 0.7 x VDD, VDD = 6 V Internal pull-up resistor at MR CI UNIT VDD = 6 V, IOL = 3 mA 3.5 V < VIT < 5 V MR MAX 0.8 x VDD VDD = 3.3 V, IOL = 2 mA TPS383xK33 VHYS TYP VDD = 3.3 V, IOL = -2 mA TPS383xE18 VIT MIN nA mA 30 k 5 pF The lowest voltage at which the RESET output becomes active. tR, VDD 15 ms/V. To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 mF) should be placed near the supply terminal. If manual reset is unused, MR should be connected to VDD to minimize current consumption. Copyright (c) 2000-2010, Texas Instruments Incorporated Submit Documentation Feedback 3 TPS3836 TPS3837 TPS3838 SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 www.ti.com SWITCHING CHARACTERISTICS At TA = +25C, RL = 1 M, and CL = 50 pF, unless otherwise noted. PARAMETER tD TEST CONDITIONS Delay time MIN TYP MAX VDD VIT + 0.2 V, MR = 0.7 x VDD, CT = GND, (See Timing Diagram) 5 10 15 VDD VIT + 0.2 V, MR = 0.7 x VDD, CT = VDD, (See Timing Diagram) 100 200 300 UNIT ms Propagation (delay) time, high-to-low-level output VDD to RESET delay (TPS3836, TPS3838) VIL = VIT - 0.2 V, VIH = VIT + 0.2 V 10 tPHL VIL = 1.6 V 50 tPLH Propagation (delay) time, low-to-high-level output VDD to RESET delay (TPS3837) VIL = VIT - 0.2 V, VIH = VIT + 0.2 V 10 VIL = 1.6 V 50 tPHL Propagation (delay) time, high-to-low-level output MR to RESET delay (TPS3836, TPS3838) VDD VIT + 0.2 V, VIL = 0.3 x VDD, VIL = 0.7 x VDD 0.1 ms tPLH Propagation (delay) time, low-to-high-level output MR to RESET delay (TPS3837) VDD VIT + 0.2 V, VIL = 0.3 x VDD, VIL = 0.7 x VDD 0.1 ms ms ms TIMING REQUIREMENTS At TA = +25C, RL = 1 M, and CL = 50 pF, unless otherwise noted. PARAMETER tW 4 Pulse width TEST CONDITIONS MIN at VDD VIH = VIT + 0.2 V, VIL = VIT - 0.2 V 6 at MR VDD VIT + 0.2 V, VIL = 0.3 x VDD, VIH = 0.7 x VDD 1 Submit Documentation Feedback TYP MAX UNIT ms Copyright (c) 2000-2010, Texas Instruments Incorporated TPS3836 TPS3837 TPS3838 www.ti.com SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 FUNCTIONAL BLOCK DIAGRAM VDD CT R3 MR C1 R1 + S1 Reset Logic and Timer - RESET (TPS3837-Push-Pull) RESET (TPS3836-Push-Pull TPS3838-Open-Drain) R2 C2 S2 Band-Gap Reference S3 C3 Refresh Timer GND FUNCTION TABLE (1) (2) RESET (1) RESET (2) MR VDD > VIT L 0 L H L 1 L H H 0 L H H 1 H L TPS3836 and TPS3838. TPS3837. Copyright (c) 2000-2010, Texas Instruments Incorporated Submit Documentation Feedback 5 TPS3836 TPS3837 TPS3838 SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 www.ti.com TIMING DIAGRAM A B C D E F G VDD VIT < 1.1 V t MR t RESET t tD Undefined Output tD tD Undefined Output TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE MANUAL RESET CURRENT vs MANUAL RESET VOLTAGE 100 10 MR = Open CT = GND VDD = 6 V CT = GND IMR - Manual Reset Current - mA TA = 85C IDD - Supply Current - mA 8 TA = 25C 6 TA = 0C 4 TA = -40C 2 0 TA = -40C -100 TA = 0C -200 TA = 25C -300 TA = 85C -400 -500 0 2 4 VDD - Supply Voltage - V Figure 1. 6 0 Submit Documentation Feedback 6 -2 0 2 4 6 VMR - Manual Reset Voltage - V Figure 2. Copyright (c) 2000-2010, Texas Instruments Incorporated TPS3836 TPS3837 TPS3838 www.ti.com SLVS292E - JUNE 2000 - REVISED OCTOBER 2010 TYPICAL CHARACTERISTICS (continued) LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 2.0 VDD = 2 V MR = OPEN CT = GND VOH - High-Level Output Voltage - V VOL - Low-Level Output Voltage - V 2.0 1.5 TA = 25C 1.0 TA = 85C TA = 0C 0.5 TA = -40C VDD = 2 V MR = OPEN CT = GND 1.5 TA = 85C TA = 25C 1.0 TA = 0C 0.5 TA = -40C 0 0 0 1 2 3 4 5 6 0 7 IOL - Low-Level Output Current - mA 2 3 4 Figure 3. Figure 4. NORMALIZED RESET THRESHOLD VOLTAGE VS FREE-AIR TEMPERATURE MINIMUM PULSE DURATION AT VDD vs VDD THRESHOLD OVERDRIVE 22 1.001 CT = GND MR = Open 5 MR = Open CT = GND TA = +25C 20 Minimum Pulse Duration at VDD - ms Normalized Reset Threshold Voltage - V 1 IOH - High-Level Output Current - mA 1.000 0.999 0.998 0.997 0.996 18 16 14 12 10 8 6 4 2 0.995 -40 -15 10 35 60 TA - Free-Air Temperature - C Figure 5. Copyright (c) 2000-2010, Texas Instruments Incorporated 85 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VDD - Threshold Overdrive - V Figure 6. Submit Documentation Feedback 7 PACKAGE OPTION ADDENDUM www.ti.com 28-Oct-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3836E18DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836E18DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836H30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836H30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836H30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836H30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 28-Oct-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3836L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3836L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3836L30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3837L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3837L30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838E18DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 28-Oct-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3838E18DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838K33DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838K33DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3838K33DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838K33DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3838L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device TPS3838L30DBVTG4 28-Oct-2010 Status (1) ACTIVE Package Type Package Drawing SOT-23 DBV Pins 5 Package Qty 250 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) CU NIPDAU Level-1-260C-UNLIM Samples (Requires Login) Request Free Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TPS3836E18, TPS3836H30, TPS3836J25, TPS3836K33, TPS3836L30, TPS3837E18, TPS3837J25, TPS3837K33, TPS3837L30, TPS3838E18, TPS3838J25, TPS3838K33, TPS3838L30 : * Automotive: TPS3836E18-Q1, TPS3836H30-Q1, TPS3836J25-Q1, TPS3836K33-Q1, TPS3836L30-Q1, TPS3837E18-Q1, TPS3837J25-Q1, TPS3837K33-Q1, TPS3837L30-Q1, TPS3838E18-Q1, TPS3838J25-Q1, TPS3838K33-Q1, TPS3838L30-Q1 * Enhanced Product: TPS3836J25-EP, TPS3836L30-EP, TPS3837K33-EP NOTE: Qualified Version Definitions: Addendum-Page 4 PACKAGE OPTION ADDENDUM www.ti.com 28-Oct-2010 * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 27-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS3836E18DBVR SOT-23 DBV 5 3000 178.0 9.0 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836E18DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836H30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836H30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836J25DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836K33DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3836L30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3837E18DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3837E18DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3837J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3837J25DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3837K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3837L30DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3837L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3837L30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 27-Aug-2012 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TPS3837L30DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838E18DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838E18DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838E18DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838E18DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838J25DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3838J25DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838J25DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838J25DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3838K33DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838K33DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838K33DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838K33DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838K33DRVR SON DRV 6 3000 179.0 8.4 2.2 2.2 1.2 4.0 8.0 Q2 TPS3838K33DRVT SON DRV 6 250 179.0 8.4 2.2 2.2 1.2 4.0 8.0 Q2 TPS3838L30DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS3838L30DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3838L30DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838L30DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 27-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3836E18DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3836E18DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3836H30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3836H30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3836J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3836J25DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3836K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3836K33DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3836L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3836L30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3837E18DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TPS3837E18DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS3837J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3837J25DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3837K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3837L30DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TPS3837L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3837L30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS3837L30DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TPS3838E18DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 27-Aug-2012 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3838E18DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TPS3838E18DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TPS3838E18DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS3838J25DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TPS3838J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3838J25DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838J25DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TPS3838J25DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS3838K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3838K33DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838K33DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TPS3838K33DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 TPS3838K33DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS3838K33DRVR SON DRV 6 3000 203.0 203.0 35.0 TPS3838K33DRVT SON DRV 6 250 203.0 203.0 35.0 TPS3838L30DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS3838L30DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TPS3838L30DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS3838L30DBVT SOT-23 DBV 5 250 203.0 203.0 35.0 Pack Materials-Page 4 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated