MINI-BEAM SME312 Expert Series Microprocessor-based TEACH mode photoelectric sensors * TEACH-mode sensors in the popular MINI-BEAM package * Easy push-button programming automatically adjusts sensitivity to optimal setting * Multiple sensing modes include retroreflective, polarized retro, clear object detection, diffuse, divergent, and convergent, plus glass and plastic fiber optic models * Fast, 500 microsecond (0.5 millisecond) output response * Bipolar NPN (sinking)/PNP (sourcing) outputs * Easy output programming eliminates the need for Light or Dark Operate selection * Separate TEACH input allows remote programming by an external device, such as a switch or a process controller * LED status indications for received signal strength (using Banner's AIDTM function), power ON, and output state * Green Stability indicator flashes when received signal level approaches the switching threshold, also indicates Power ON * Integral 2 meter (6.5 foot) cable or 5-pin Euro-style quick-disconnect (QD) connector, depending on model; 9 meter (30 foot) cable models are also available U.S. patent(s) issued or pending WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or deenergized sensor output condition. Retroreflective Models Sensing Mode Model * Range or Focus Retroreflective, 650 nm visible red SME312LV 5 m (15 ft)** Polarized retroreflective, 650 nm visible red SME312LP 10 mm to 3 m** (0.4 in to 10 ft) Polarized retroreflective, 650 nm visible red (clear object) SME312LPC 1 m (3.3 ft) with supplied reflector** Supply Voltage Output Type 10 to 30V dc Bipolar NPN/PNP ** Sensing ranges vary according to the efficiency and reflective area of the retroreflector(s) used. (Retroreflective tape is not recommended for use with Clear Object Detection models.) See Accessories and the Banner Engineering catalog for more information. Diffuse Models Sensing Mode Model * Range or Focus Diffuse, 880 nm infrared SME312D 380 mm (15 in) Diffuse, 650 nm visible red SME312DV 1100 mm (43 in) Divergent Diffuse, 880 nm infrared SME312W 130 mm (5 in) P/N 055214 Rev. F Supply Voltage Output Type 10 to 30V dc Bipolar NPN/PNP 1/23/2013 0 055214 1 MINI-BEAM SME312 Expert Series Convergent Models Sensing Mode Model * Range or Focus SME312CV 16 mm (0.65 in) Spot Size at Focus: 1.3 mm (0.05 in) SME312CV2 43 mm (1.7 in) Spot Size at Focus: 3.0 mm (0.12 in) Convergent, 650 nm visible red 16 mm (0.65 in) Spot Size at Focus: 1.0 mm (0.04 in) Convergent, 525 nm visible green SME312CVG Convergent, 475 nm visible blue SME312CVB Convergent, 450-650 nm visible white SME312CVW 16 mm (0.65 in) Spot Size at Focus: 1.8 mm (0.07 in) Sensing Mode Model * Range or Focus Glass Fiber Optic, 880 nm infrared SME312F Glass Fiber Optic, 650 nm visible red SME312FV Glass Fiber Optic, 525 nm visible green SME312FVG Glass Fiber Optic, 475 nm visible blue SME312FVB Glass Fiber Optic, 450-650 nm visible white SME312FVW Supply Voltage Output Type 10 to 30V dc Bipolar NPN/PNP Supply Voltage Output Type 10 to 30V dc Bipolar NPN/PNP Supply Voltage Output Type 10 to 30V dc Bipolar NPN/PNP Glass Fiber Optic Models Range varies by sensing mode and fiber optics used Plastic Fiber Optic Models Sensing Mode Model * Plastic Fiber Optic, 650 nm visible red SME312FP Plastic Fiber Optic, 525 nm visible green SME312FPG Plastic Fiber Optic, 475 nm visible blue SME312FPB Plastic Fiber Optic, 450-650 nm visible white SME312FPW Range or Focus Range varies by sensing mode and fiber optics used * Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix "W/30" to the model number (e.g., SME312LV W/30.) To order the 5-pin Euro-style QD models, add suffix "QD" (e.g., SME312LVQD). Models with a QD connector require a mating cable. Overview MINI-BEAM(R) ExpertTM is a complete family of sensors, all housed in the popular, robust and compact rectangular housing. Their large push button and easy-to-see indicators provide easy configuration, alignment, and monitoring during use. Yellow output indicator LED Bi-color green/red indicator LED Retroreflective and Polarized Retroreflective Mode models are excellent for sensing relatively small items where opposed-mode sensing is not possible. They are recommended for relatively clean environments where high excess gain is not required. Polarized models filter out unwanted reflections. Polarized Retroreflective Mode - Clear Object Detection models reliably detect the presence of clear objects. 2 www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series Diffuse Mode models are excellent for sensing objects of adequate size and reflectivity at short range. Divergent models are useful for sensing small items and translucent or transparent materials at close range. The SME312DV sensors effectively sense specular surfaces like semi-conductor wafers, disk drive media, glass and machined surfaces. The collimated optics of the SME312DV also permits the sensor to be mounted against clear container walls, view ports and other types of optical "feed-throughs." Convergent Mode models are a good choice for counting adjacent radiused objects and for accurate position sensing. Blue, green and white beam models are recommended for color mark sensing. Glass Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand vibration and shock and are immune to electrical noise. Glass fibers withstand high temperatures, extreme moisture and corrosive materials. Glass fibers are not recommended for applications requiring bending or repeated flexing (see plastic fiber models). Visible beam models are recommended for color mark sensing. Plastic Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand vibration and shock and are immune to electrical noise. Plastic fibers function well at temperatures from -30 to +70 C (-20 F to +158 F), and stand up to repeated flexing. Most are easy to shorten in the field, for custom installations. Plastic fibers are not recommended for severe environments (see glass fiber models). Plastic fiber optic sensors are recommended for color mark sensing. Status Indicators Normal sensor operation is called RUN mode. Sensor configuration (setting the sensitivity threshold and selecting output ON and OFF conditions) is performed in TEACH mode. The two LED indicators (bi-color green/red and yellow) have distinct roles in the two operation modes. If contrast is marginal, the bi-color indicator will flash green to indicate instability. If this occurs, reconfigure or realign the sensor, or clean the sensor or fiber lenses. The Signal Strength indicator is Banner's exclusive AIDTM (Alignment Indicating Device). Its pulse rate increases as the received light signal strength increases (during programming). This feature simplifies accurate alignment during TEACH mode, and gives a relative indication of sensing contrast between the light and dark conditions. LED RUN Mode Solid green Power is on TEACH Mode Flashing green Sensed light level is approaching sensing threshold* Solid red Sensor "sees" its own modulated light source; pulse rate is proportional to the received light signal strength** Yellow on Outputs conducting Ready to TEACH output ON condition Yellow off Outputs not conducting Ready to TEACH output OFF condition * This is the Stability indicator, which signals when maintenance, realignment, or reconfiguration is needed during RUN mode. ** The faster the pulse rate, the stronger the light signal. Remote Configuration The remote function may be used to configure the sensor remotely or to disable the push button for security. Connect the gray wire of the sensor to ground (0V dc), with a remote programming switch connected between them. Pulse the remote line according to the diagrams in the configuration procedures. The length of the individual programming pulses is equal to the value T where: 0.04 seconds "T" 0.8 seconds Troubleshooting If the MINI-BEAM Expert's Power LED alternately flashes red/green, this indicates a microprocessor memory error. To clear the error, reteach the sensor or cycle the power ON and OFF and re-teach the sensor. If this does not solve the problem, or if it occurs frequently, replace the sensor. Static Teach The two sensing conditions may be presented in either order. The condition presented first is the condition for which the output will energize (the "Output ON" target). P/N 055214 Rev. F www.bannerengineering.com - tel: 763-544-3164 3 MINI-BEAM SME312 Expert Series 2nd Taught Condition 1st Taught Condition Sensor positions threshold between taught conditions Output OFF Output ON Sensitivity is automatically set (and optimized) when teaching the sensor the ON and OFF conditions. When the push button is clicked, the sensor samples each sensing condition and registers it into memory. After the second sensing condition is registered, the MINI-BEAM Expert automatically sets the sensitivity to the optimum value for the application, and then returns to RUN mode. Push button (0.04 seconds "Click" 0.8 seconds); Remote line (0.04 seconds "T" 0.8 seconds) 1. Access TEACH mode. Method Action Via push button Press and hold push button until the bi-color (green/red) indicator begins to flash red, or turns OFF. Via remote line No action required; sensor is ready for 1st sensing condition. Push button method only: The yellow LED is on. The red LED pulses to indicate relative received signal strength. The sensor is ready for the output ON condition. 2. Teach the first sensing condition. Method Action Via push button Present the first sensing condition and click the push button. Via remote line Present the first sensing condition and single-pulse the remote line. The yellow LED is off. The red LED pulses to indicate relative signal strength. The sensor registers the output ON condition and is ready for the output OFF condition. 3. Teach the second sensing condition and return to RUN mode. Method Action Via push button Present the second sensing condition and click the push button. Via remote line Present the second sensing condition and single-pulse the remote line. If the teach is accepted the green LED is on (or flashes if the signal is close to the switching threshold) and the yellow LED is off until the sensing condition changes; the sensor registers the output OFF condition, positions the threshold, and returns to RUN mode. If the teach is not accepted, the yellow LED is on and the red LED pulses to indicate the relative received signal strength. The sensor returns to its wait state and is ready for the first sensing condition. NOTE: The sensor returns to RUN mode if the first TEACH condition is not registered within 90 seconds. TEACH mode may be cancelled before either the first or second condition by holding the push button depressed for more than two seconds. Enabling or Disabling the Push Button In addition to its programming function, the remote line may be used to disable the push buttons for security. Disabling the push buttons prevents undesired tampering with the sensor configuration settings. 1. Connect the sensor's gray wire. 2. Four-pulse the remote line to enable or disable the push button. The sensor toggles between enable and disable settings and returns to RUN mode. Specifications General Outputs Supply Voltage and Current 10 to 30V dc (10% maximum ripple) at less than 45 mA, exclusive of load 4 Output Configuration Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series General Outputs Supply Protection Circuitry Protected against reverse polarity and transient voltages Adjustments Push-button TEACH mode sensitivity setting; remote TEACH mode input is provided Indicators Two LEDs: yellow and bi-color green/red Construction Reinforced thermoplastic polyester housing, totally encapsulated, o-ring seal, acrylic lenses, and stainless steel screws. Connections PVC-jacketed 5-conductor 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or 5-pin Euro-style quick-disconnect (QD) fitting are available. QD cables are ordered separately. Application Notes The first condition presented during TEACH mode becomes the output ON condition. Output Rating 150 mA maximum each output at 25 C, derated to 100 mA at 70 C (derate 1 mA per C) Off-state leakage current: less than 5 A at 30V dc ON-state saturation current: less than 1V at 10 mA; less than 1.5V at 150 mA Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Output Response Time Sensors will respond to either a "light" or a "dark" signal of 500 microseconds or longer duration, 1 kHz max. NOTE: 1 second delay on power-up; outputs do not conduct during this time. Repeatability 100 microseconds (all models) Environmental Certifications Rating Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67 Operating Conditions Temperature: -20 to +70 C (-4 to +158 F) Max. Relative Humidity: 90% at 50 C (non-condensing) Performance Curves Retroreflective Excess Gain Beam Pattern 1000 E X C E S S G A I N SME312LV 75 mm Retroreflective Mode 50 mm SME312LV 2.0" 1.0" 0 10 0 25 mm 1.0" 50 mm 2.0" 75 mm 3.0" 0 1 .01 m .033' 3.0" Retroreflective Mode 25 mm 100 Excess Gain 1m 3' 2m 6' 3m 9' DISTANCE .10 m .33' 1.0 m 3.3' DISTANCE P/N 055214 Rev. F 10 m 33' 4m 12' 5m 15' Beam Pattern 1000 E X C E S S G A I N SME312LP SME312LP 60 mm Retroreflective Mode 100 1.6" 20 mm 0.8" 0 0 20 mm 0.8" 40 mm 1.6" 60 mm 10 2.4" 0 1 .01 m 0.03' 2.4" Retroreflective Mode 40 mm .6 m 2' 1.2 m 4' 1.8 m 6' 2.4 m 8' 3.0 m 10' DISTANCE 0.1 m 0.3' 1m 3' 10 m 30' DISTANCE www.bannerengineering.com - tel: 763-544-3164 5 MINI-BEAM SME312 Expert Series Excess Gain Beam Pattern 1000 E X C E S S G A I N 100 SME312LPC 150 mm Retroreflective Mode 100 mm with BRT-77X77 Reflector SME312LPC Excess Gain Beam Pattern 4" 2" with BRT-2X2 Reflector 0 with BRT-77X77 Reflector 50 mm 10 Beam Pattern 6" Retroreflective Mode 50 mm with BRT-2X2 Reflector Excess Gain 0 2" 100 mm 4" 150 mm 6" 0 .5 m 1.7' 1m 3.3' 1.5 m 5' 2m 6.6' 2.5 m 8.3' DISTANCE 1 .01 m .033' .1 m .33' 1.0 m 3.3' 10.0 m 33' DISTANCE Diffuse Diffuse-mode performance based on 90% reflectance white test card. Excess Gain Beam Pattern 1000 SME312D 15 mm 0.6" Diffuse Mode 10 mm 0.4" 5 mm 0.2" 0 0 5 mm 0.2" 10 mm 0.4" 15 mm 0.6" 0 75 mm 3.0" 150 mm 6.0" 225 mm 9.0" 300 mm 12.0" 375 mm 15.0" E X C E S S G A I N Diffuse Mode 100 20 mm SME312DV 0.8" 15 mm Diffuse Mode 0.6" 10 mm 0.4" 5 mm 0.2" 0 10 0 5 mm 0.2" 10 mm 0.4" 15 mm 0.6" 20 mm 0.8" 0 1 10 mm 0.4" DISTANCE SME312DV 100 mm 4.0" 1000 mm 40" 250 mm 10.0" 500 mm 20.0" 10000 mm 400" 750 mm 1000 mm 1250 mm 30.0" 40.0" 50.0" DISTANCE DISTANCE 1000 E X C E S S G A I N SME312W SME312W 22.5 mm Diffuse Mode 100 0.9" Diffuse Mode 15.0 mm 0.6" 7.5 mm 0.3" 0 10 0 7.5 mm 0.3" 15.0 mm 0.6" 22.5 mm 0.9" 0 25 mm 1.0" 50 mm 2.0" 75 mm 3.0" 100 mm 4.0" 125 mm 5.0" DISTANCE 1 1 mm .04" 10 mm .4" 100 mm 4" 1000 mm 40" DISTANCE Convergent Excess Gain Beam Pattern 1000 E X C E S S G A I N SME312CV Convergent Mode 100 0.12 " Convergent Mode 2.0 mm 0.08 " 0.04 " 1.0 mm 0 1.0 mm 0.04 " 2.0 mm 0.08 " 3.0 mm 0.12 " 0 7.5 mm 0.3 " 15 mm 0.6 " 22.5 mm 0.9 " DISTANCE 10 mm .4 " 100 mm 4" DISTANCE 6 SME312CV 3.0 mm 0 10 1 1 mm .04 " Excess Gain 1000 mm 40 " 30 mm 1.2 " 37.5 mm 1.5 " 1000 E X C E S S G A I N Beam Pattern SME312CV2 SME312CV2 3.0 mm Convergent Mode 100 0.08" 1.0 mm 0.04" 0 10 0 1.0 mm 0.04" 2.0 mm 0.08" 3.0 mm 0.12" 0 1 1 mm .04 " 0.12" Convergent Mode 2.0 mm 25 mm 1" 50 mm 2" 75 mm 3" 100 mm 4" 125 mm 5" DISTANCE 10 mm .4 " 100 mm 4" 1000 mm 40 " DISTANCE www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series Excess Gain Beam Pattern 1000 E X C E S S G A I N SME312FPG SME312FPB SME312FPW 100 1.0 mm Convergent Mode 0.04" PBT46U Fiber Beam Pattern Excess Gain Beam Pattern 0.08" 0 Diffuse Mode Plastic Fiber 10 0.12" 2.0 mm SME312CVG SME312CVB SME312CVW 3.0 mm Excess Gain 0 1.0 mm 0.04" 2.0 mm 0.08" 3.0 mm 0.12" 0 7.5 mm 0.3" 15 mm 0.6" 22.5 mm 0.9" 30 mm 1.2" 37.5 mm 1.5" DISTANCE 1 .1 mm .004 in 1 mm .04 in 10 mm .4 in 100 mm 4 in DISTANCE Glass Fiber Optic Excess Gain Beam Pattern 1000 E X C E S S G A I N SME312F 75 mm Opposed Mode Glass Fibers 50 mm 100 10 2" 25 mm 1" IT13S 0 IT23S 25 mm 1" 50 mm 2" 75 mm IT13S Fibers 1 .01 m .033' 3" Opposed Mode 0 IT23S Fibers w/L9 lenses 1000 SME312F 3" IT23S Fibers 0 100 mm 4" 200 mm 8" 300 mm 12 " 500 mm 20 " 400 mm 16 " E X C E S S G A I N 1m 3.3' 10 m 33' Diffuse Mode Glass Fibers 100 G A I N 10 IT13S Fiber 1" IT13S 10 mm .40" 100 mm 4.0" 0 IT23S 25 mm 1" 50 mm 2" 75 mm 3" 0 1 1 mm .04" 2" 25 mm 0 IT23S Fiber 3" Opposed Mode 50 mm 100 50 mm 2" 100 mm 4" 150 mm 6" 200 mm 8" 250 mm 10 " DISTANCE 1000 mm 40" SME312FVG SME312FVB SME312FVW Diffuse Mode 100 SME312FVG SME312FVB SME312FVW 0.12" 2.0 mm 1.0 mm Diffuse Mode 0.04" 3.0 mm 0 BT23S Fiber BT13S 0.025 " 1.3 mm 0.050 " 0.075 " 7.5 mm 0.3 " BT13S Fiber 15 mm 0.6 " 22.5 mm 0.9 " 30 mm 1.2 " 37.5 mm 1.5 " DISTANCE 10 mm .4 " 100 mm 4" 1000 mm 40 " E X C E S S G A I N SME312FV SME312FV 1.95 mm 0.075 " Diffuse Mode 1.30 mm Diffuse Mode 0.050 " 0.65 mm 100 0.025 " 0 10 BT13S 0.025 " 1.30mm 0.050 " 0.075 " 0 BT13S Fiber 0 0.65 mm 1.95 mm BT23S Fiber 1 mm .04 " BT23S 5 mm 0.2 " 10 mm 0.4 " 15 mm 0.6 " 20 mm 0.8 " 25 mm 1.0 " DISTANCE 10 mm .40 " 100 mm 4" BT13S Fiber 0.08" 1.0 mm 0.04" 2.0 mm 0.08" 0.12" 0 1 mm 0.04 " 0 0.65 mm 0 BT23S 3.0 mm 10 1 .1 mm .004 " BT23S DISTANCE 1000 G A I N BT13S 0 1 .1 mm .004 " DISTANCE E X C E S S 0.025 " 0 1.9 mm 1000 SME312FV 75 mm Opposed Mode 0.050 " DISTANCE 1000 SME312FV 0.075 " SME312F Diffuse Mode 0.65 mm BT23S Fiber 10 DISTANCE E X C E S S 1.9 mm 1.3 mm 1 1 mm .04 " DISTANCE .1 m .33' SME312F 8 mm 0.3" 16 mm 0.6" 24 mm 0.9" 32 mm 1.2" 40 mm 1.5" DISTANCE 10 mm 0.40 " 100 mm 4.0 " DISTANCE P/N 055214 Rev. F www.bannerengineering.com - tel: 763-544-3164 7 MINI-BEAM SME312 Expert Series Plastic Fiber Optic Excess Gain Beam Pattern 1000 E X C E S S G A I N SME312FP 45 mm Opposed Mode Plastic Fibers 30 mm PIT46U Fiber PIT26U Fiber 1.2" 0.6" 0 PIT46U PIT26U 15 mm 0.6" 30 mm 1.2" 45 mm 1.8" 0 1 1 mm .04 " 1.8" Opposed Mode 0 25 mm 1" 50 mm 2" 75 mm 3" 100 mm 4" 125 mm 5" DISTANCE 10 mm .40 " 100 mm 4.0 " 1000 1000 mm 40 " G A I N SME312FPG SME312FPB SME312FPW 3.0 mm 2.0 mm Diffuse Mode Plastic Fiber 1.0 mm 0 Diffuse Mode Plastic Fiber 3.8 mm Diffuse Mode Plastic Fibers 2.5 mm SME312FP 0.15 " Diffuse Mode 0.10 " 1.2 mm 100 0.05 " 0 PBT46U Fiber 10 0 PBT46U PBT26U 1.2 mm 0.05 " 2.5 mm 0.10 " 3.8 mm 0.15 " 0 PBT26U Fiber 7.5 mm 0.3 " 15 mm 0.6 " 22.5 mm 0.9 " 30 mm 1.2 " 37.5 mm 1.5 " DISTANCE 1 mm .04 " 10 mm .4 " 100 mm 4" 0.08" 0 0.04" 2.0 mm 10 0.12" 0.04" PBT46U 1.0 mm PBT46U Fiber 0.08" 3.0 mm 0.12" 0 1 .1 mm .004 in G A I N SME312FP DISTANCE SME312FPG SME312FPB SME312FPW 100 E X C E S S 1 .1 mm .004 " DISTANCE E X C E S S Beam Pattern 1000 SME312FP 15 mm 100 10 Excess Gain 4 mm 0.15" 8 mm 0.30" 12 mm 0.45" 16 mm 0.60" 20 mm 0.75" DISTANCE 1 mm .04 in 10 mm .4 in 100 mm 4 in DISTANCE Dimensions Cabled Models (Suffix E, EL, EPD, R, RL, RPD, LV, LVAG, LP, LPC, D, C, C2, CV, CV2, CVG, CV2G, CVB, CV2B, CVW ) 3.2 mm (0.13") Divergent Diffuse Models (Suffix DBZ and W) 12.2 mm (0.48") 3 mm dia Clearance (2) 30.7 mm (1.21") Bezel 24.1 mm (0.95") 3 mm dia Clearance (2) 18.0 mm (0.71") M18 x 1 x 15 mm Thread (Mounting nut supplied) 2 m (6.5') Cable Mounting peg (6.3 mm dia x 2.5 mm) 39.1 mm (1.54") 19.1 mm (0.75") 13.2 mm (0.52") 27.4 mm (1.08") 53.3 mm (2.10") 8 www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series Glass Fiber Models (Suffix F, FV, FVB, FVG, FVW) Plastic Fiber Models (Suffix FP, FPB, FPG, FPH, FPW) 3.2 mm (0.13") M18 x 1 x 19 mm Thread (Mounting Nut Supplied) 30.7 mm (1.21") 12.2 mm (0.48") 24.1 mm (0.95") 3 mm dia clearance (2) Fiber Optic Fitting Fiber Optic Fitting 2 m (6.5') Cable Mounting Peg (6.3 mm dia x 2.5 mm) 57.5 mm (2.27") 22.3 mm (0.88") 19.1 mm (0.75") 31.2 mm (1.23") 16.2 mm (0.64") 42.1 mm (1.66") QD Models 12 mm Thread Quick-disconnect 20.0 mm (0.79") Wiring Cabled Models bn bu wh bk gy QD Models + 10-30V dc - Load Load Remote Teach bn bu wh bk gy + 10-30V dc - Load Load Remote Teach Accessories Retroreflective Targets Banner offers a wide selection of high-quality retroreflective targets. See your current Banner Engineering Corp catalog for complete information on available models. Sensing range will vary, according to the retroreflector's efficiency and reflective area. * For high-vibration applications: model BRT-36X40BM (micro-prism geometry) is recommended. * For long-range applications: model BRT-77X77C reflector provides a range up to 2 m (6.5'). * For clear object detection (low-contrast applications): reflector model BRT-2X2 is recommended; one comes bundled with each SME312LPC(QD) sensor. * Polarized sensors require corner-cube type retroreflective targets only; reflective tape is not recommended. Before installing retroreflective tape, clean the mounting surface with an isopropyl alcohol wipe. Optional brackets for mounting reflective targets are available. See the Accessories section of your current Banner catalog or our website at www.bannerengineering.com. P/N 055214 Rev. F www.bannerengineering.com - tel: 763-544-3164 9 MINI-BEAM SME312 Expert Series BRT-2X2 * Square, acrylic target * Reflectivity factor: 1.0 * Max. temperature: +50 C (+122 F) * Optional brackets are available * Approximate size: 51 mm x 51 mm 51 mm (2.0") 51 mm (2.0") 56 mm (2.2") 10 mm (0.4") BRT-77X77C * Square, acrylic target * Reflectivity Factor: 2.0 * Temperature: -20 to +60 C (-4 to +140 F) * Optional brackets are available * Approximate size: 84.5 mm x 84.5 mm 8.9 mm (0.40") Clear Acrylic Lens 30 mm 3.5 mm (0.14") (1.2") 4.2 mm x 14.2 mm Slot (2) (0.16" x 0.56") 84.5 mm (3.3") 61 mm (2.4") 77 mm (3.0") 9 mm (0.4") 84.5 mm (3.3") 77 mm (3.0") BRT-36X40BM * Rectangular, acrylic target * Reflectivity Factor: 1.2 * Max. Temperature: +50 C (120 F) * Approximate size: 51 mm x 51 mm * Micro-prism geometry BRT-TVHG * Reflectivity factor: 0.8 * Max. Temperature: +60C (+140F) Clear Acrylic Lens 51 mm (2.0") 38 mm (1.5") 51 mm (2.0") 40 mm (1.6") 4.3 mm (0.16") 10 mm (0.4") 7 mm (0.3") 61 mm (2.4") Clear Acrylic Lens 20 mm (0.8") 3.5 mm (0.14") 10 mm (0.4") Retroreflective tape is available in a variety of sizes and shapes; see your Banner Catalog for more information. Not recommended for use with clear object detection sensors. 3.5 mm (0.13") 5-Pin Euro-Style Cordsets 5-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC1-501.5 0.50 m (1.5 ft) MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) MQDC1-515RA 4.57 m (15 ft) Style Dimensions 10 9.14 m (30 ft) 2 44 Typ. 1 Straight 3 M12 x 1 o 14.5 4 5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle MQDC1-530RA Pinout M12 x 1 o 14.5 [0.57"] www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series Mounting Brackets SMB46L * Right-angle * L bracket * 14-ga. 316 stainless steel SMB46S * Right-angle * S bracket * 14-ga. 316 stainless steel Hole center spacing: A = 16.0 Hole size: A = 16.5 x 18.7 Hole center spacing: A = 16.0 Hole size: A = 16.5 x 18.7, B = 34.0 x 10.0 SMB46U * Right-angle * U bracket for sensor protection * 14-ga. 316 stainless steel SMB18A * Right-angle mounting bracket with a curved slot for versatile orientation * 12-ga. stainless steel * 18 mm sensor mounting hole * Clearance for M4 (#8) hardware Hole center spacing: A = 16.0 Hole size: A = 16.5 x 18.7, B = 34.0 x 13.0 SMB18AFA.. * Protective, swivel bracket with tilt and pan movement for precision adjustment * Easy sensor mounting to extruded rail T-slots * Metric and inch size bolts available * Mounting hole for 18 mm sensors 30 C A 41 B 46 Hole center spacing: A to B = 24.2 Hole size: A = o 4.6, B = 17.0 x 4.6, C = o 18.5 66 B 69 A SMB18Q * Right-angle flanged bracket * 18 mm sensor mounting hole * 12-ga. stainless steel Hole center spacing: A to B = 24.2 Hole size: A = o 4.6, B = 17.0 x 4.6, C = o 19.0 Hole size: B = o 18.1 Model Bolt Thread (A) SMB18AFA 3/8 - 16 x 2" SMB18AFAM10 M10 - 1.5 x 50 SMB18SF * 18 mm swivel bracket with M18 x 1 internal thread * Black thermoplastic polyester * Stainless steel swivel locking hardware included P/N 055214 Rev. F SMB18UR * 2-piece universal swivel bracket * 300 series stainless steel * Stainless steel swivel locking hardware included www.bannerengineering.com - tel: 763-544-3164 11 MINI-BEAM SME312 Expert Series Hole center spacing: A = 36.0 Hole size: A = o 5.3, B = o 18.0 * Mounting hole for 18 mm sensor Hole center spacing: A = 25.4, B = 46.7 Hole size: B = 6.9 x 32.0, C = o 18.3 SMB312PD * Right-angle mounting bracket with a curved slot for versatile orientation * 12-ga. stainless steel * 18 mm sensor mounting hole * Clearance for M4 (#8) hardware NOTE: Not for use with plastic fiber optic sensors SMBAMS18RA * Right-angle SMBAMS series bracket with 18 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel 40 C 48 A 45 B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = o 6.5, C = o 19.0 Hole center spacing: A to B = 24.2 Hole size: A = o 4.6, B = 17 x 4.6, C = o 18.5 SMBAMS18P * Flat SMBAMS series bracket with 18 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel C 78 A B 45 Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = o 6.5, C = o 19.0 SMB30SK * Flat-mount swivel bracket with extended range of motion * Black reinforced thermoplastic polyester and 316 stainless steel * Stainless steel swivel locking hardware included 68 B 57 78 Hole center spacing: A = 50.8 Hole size: A = o 7, B = o 18 SMB3018SC * 18 mm swivel side or barrel-mount bracket * Black reinforced thermoplastic polyester * Stainless steel swivel locking hardware included SMB3018SUS * Side-mount swivel with extended range of motion * Black reinforced thermoplastic polyester * Stainless steel swivel locking hardware included Hole center spacing: A = 50.8 Hole size: A = o 7.0, B = o 18.0 Hole center spacing: A = Hole size: A = o , B = o SMB312S * Stainless steel 2-axis, side-mount bracket SMB312B * Stainless steel 2-axis, bottom-mount bracket * Includes mounting foot 12 A www.bannerengineering.com - tel: 763-544-3164 P/N 055214 Rev. F MINI-BEAM SME312 Expert Series Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - tel: 763-544-3164