Part Number: XZMG54W-1
2.0x1.25mm SMD CHIP LED LAMP
Mar 25,2014 XDSA1280 V9-Z Layout: Maggie L.
P. 1/4
Features
● Ideal for indication light on hand held products
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
Absolute Maximum Ratings
(TA=25°C)
MG
(GaP) Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS 140 mA
Power Dissipation PD 62.5 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
Package Schematics
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
MG
(GaP) Unit
Forward Voltage (Typ.)
(IF=20mA) VF 2.2 V
Forward Voltage (Max.)
(IF=20mA) VF 2.5 V
Reverse Current (Max.)
(VR=5V) IR 10 uA
Wavelength of Peak
Emission CIE127-2007*(Typ.)
(IF=20mA)
λP 565* nm
Wavelength of Dominant
EmissionCIE127-2007* (Typ.)
(IF=20mA)
λD 568* nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ 30 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C 15 pF
Operating Characteristics
(TA=25°C)
Part
Number
Emitting
Color
Emitting
Material Lens-color
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
min. typ.
XZMG54W-1 Green GaP Water Clear 5* 11* 565* 120°
Luminous Intensity
CIE127-2007*
(IF=20mA)
mcd
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Part Number: XZMG54W-1
2.0x1.25mm SMD CHIP LED LAMP
Mar 25,2014 XDSA1280 V9-Z Layout: Maggie L.
P. 2/4
MG
LED is recommended for reflow soldering and
soldering profile is shown below.
Part Number: XZMG54W-1
2.0x1.25mm SMD CHIP LED LAMP
Mar 25,2014 XDSA1280 V9-Z Layout: Maggie L.
P. 3/4
The device has a single mounting surface.
The device must be mounted according to
the specifications.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Part Number: XZMG54W-1
2.0x1.25mm SMD CHIP LED LAMP
Mar 25,2014 XDSA1280 V9-Z Layout: Maggie L.
P. 4/4
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp
