Series-connected DIN/flange mount high-frequency noise
filter/surge suppressor. Ideal applications include critical
industrial loads drawing up to 20 amps of continuous current.
Typical applications include any microprocessor-based
products, including industrial PLCs, OEM applications, and
motion control systems.
Multi-staged design, combining a unique hybrid clamping
network with the Active Tracking Technology of the
Islatrol® family
Surge current capacity—45,000 Amps
Transient protection in all modes: line to neutral, line to
ground, and neutral to ground
LED status indication and form C contact for remote
indication
DIN mountable enclosure
UL 1449, 1283, CUL recognized, CE
10-year warranty
Print this page
MCOV
120 Volt 150 VRMS
240 Volt 275 VRMS
Line Frequency 47–63 Hz
Connection Terminal
Mounting Type DIN/Flange
Weight < 3 lbs
Response Time
Normal Mode < 0.5 ns
Common Mode < 5 ns
Operating
Temperature
–40ºC to +45ºC
Derate Linearly to 60% at +70ºC
Operating Humidity 0% to 95%
UL 1449 Classification
120V Normal Mode 330 Volts
120V Common Mode 400 Volts
240V Normal Mode 600 Volts
240V Common Mode 800 Volts
Peak Surge Current Capability (8 x 20 µs)
Line to Neutral 15,000 Amps
Line to Ground 15,000 Amps
Neutral to
Ground 15,000 Amps
Total 45,000 Amps
Frequency Response (Forward-Reverse)
Normal Mode 10 kHz to 50 MHz—
90 dB Min
Common Mode 5 MHz to 50 MHz—
60 dB Min
Typical Category A Ringwave
(6 kV, 200A, 100 kHz)
Normal Mode/Common Mode
3 Amp 1V / 300V
5 Amp 0.7V / 292V
10 Amp 0.7V / 300V
20 Amp 0.7V / 300V
Typical Category B Ringwave
(6 kV, 500A, 100 kHz)
Normal Mode/Common Mode
3 Amp 178V / 300V
5 Amp 162V / 291V
10 Amp 153V / 300V
20 Amp 200V / 300V
Voltage* Continuous Current Model
120V 3 Amps IE-103
120V 5 Amps IE-105
120V 10 Amps IE-110
120V 20 Amps IE-120
240V 3 Amps IE-203
240V 5 Amps IE-205
240V 10 Amps IE-210
240V 20 Amps IE-220
* All voltage configurations are single phase—2 wire + gnd.
