Silizium-Fotodiode mit V Charakteristik Silicon Photodiode with V Characteristics Lead (Pb) Free Product - RoHS Compliant SFH 2430 Wesentliche Merkmale Features * Spektrale Empfindlichkeit angepasst an die Augenempfindlichkeit (V) * Niedriger Temperaturkoeffizient der Fotoempfindlichkeit * Gute Linearitat * DIL-Plastikbauform mit hoher Packungsdichte * Spectral sensitivity adapted to Human Eye Sensitivity (V) * Low temperature coefficient of spectral sensitivity * high linearity * DIL plastic package with high packing density Anwendungen Applications * Umgebungslichtsensor (Handy, Regensensor, Klimaanlagensteuerung) * Ambient light sensor (Mobile phone, rain sensor, regulation of air conditioning) Typ Type Bestellnummer Ordering Code Fotostrom, Ev=1000 lx, standard light A, VR = 5 V Photocurrent Ip (A) SFH 2430 Q65110A2673 6.3 (>5) 2011-10-14 1 SFH 2430 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Top; Tstg - 40 ... + 100 C Sperrspannung Reverse voltage VR 6 V Verlustleistung, TA = 25 C Total power dissipation Ptot 150 mW Betriebs- und Lagertemperatur Operating and storage temperature range Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotoempfindlichkeit, VR = 5 V Spectral sensitivity S 6.3 (>5) nA/Ix Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 570 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 400 ... 900 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 7.00 mm2 Abmessung der bestrahlungsempfindlichen Flache Dimensions of radiant sensitive area LxB 2.65 x 2.65 mm x mm LxW Halbwinkel Half angle 60 Grad deg. Dunkelstrom, VR = 5V Dark current IR 0.1 (<5) nA Spektrale Fotoempfindlichkeit, = 550 nm Spectral sensitivity S 0.17 A/W Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 k; VR = 5 V; = 550 nm tr , tf 200 s Durchlaspannung, IF = 100 mA, E = 0 Forward voltage VF 1.2 V 2011-10-14 2 SFH 2430 Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 1000 pF Temperaturkoeffizient von ISC Temperature coefficient of ISC TCI 0.16 %/K 2011-10-14 3 SFH 2430 Photocurrent IP/IP(25 C) = f (TA) Ev = 1000 lx, VR = 5 V Relative Spectral Sensitivity Srel = f () OHF02387 100 Srel % OHF02389 1.15 IP I P (25 C) 80 1.05 70 60 1.00 50 0.95 40 30 0.90 20 0.85 10 0 400 500 600 700 800 900 0.80 -40 -20 nm 1100 0 20 40 60 C 100 TA Dark Current IR = f (VR), E = 0 IR Capacitance C = f (VR), f = 1 MHz, E = 0 OHF02390 10 0 nA OHF02388 1200 pF C 5 800 10 -1 600 5 400 200 10 -2 0 1 2 3 4 0 -2 10 5 V 6 5 10 -1 5 10 0 V 10 1 VR VR Directional Characteristics Srel = f () 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2011-10-14 0.8 0.6 0.4 0 20 40 60 80 100 4 120 Total Power Dissipation Ptot = f (TA) SFH 2430 Mazeichnung Package Outlines 6.7 (0.264) 6.2 (0.244) 4.5 (0.177) 4.3 (0.169) 0.2 (0.008) 0.1 (0.004) 1.1 (0.043) 0.9 (0.035) 0...5 1.2 (0.047) 1.1 (0.043) 0...0.1 (0...0.004) 0.45 (0.018) 0.32 (0.013) Chip position SFH 2430 0.9 (0.035) 0.7 (0.028) 1.7 (0.067) 1.5 (0.059) 4.0 (0.157) 3.7 (0.146) 1.4 (0.055) 1.0 (0.039) Photosensitive area = A Cathode lead GEOY6599 Mae in mm (inch) / Dimensions in mm (inch) 2011-10-14 5 SFH 2430 Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020C) (acc. to J-STD-020C) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Published by OSRAM Opto Semiconductors GmbH Leibnizstasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2011-10-14 6