SMBJ5.0D thru SMBJ188D, SMBJ5.0CD thru SMBJ120CD www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * 3.5 %: very tight VBR tolerance * Low leakage current * Available in uni-directional and bi-directional * 600 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability SMB (DO-214AA) * Very fast response time * Low incremental surge resistance PRIMARY CHARACTERISTICS VBR (uni-directional) 6.5 V to 228 V VBR (bi-directional) 6.5 V to 145 V VWM (uni-directional) 5.0 V to 188 V VWM (bi-directional) 5.0 V to 120 V PPPM 600 W PD at TM = 50 C 5.0 W PD at TA = 25 C 1.0 W TJ max. 150 C Polarity Uni-directional, bi-directional Package SMB (DO-214AA) DEVICES FOR BI-DIRECTIONAL APPLICATIONS For bi-directional devices use CD suffix (e.g. SMBJ5.0CD). Electrical characteristics apply in both directions. * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFETs, signal lines of sensor units for consumer, computer, industrial, and telecommunication. MECHANICAL DATA Case: SMB (DO-214AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and industrial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test per Polarity: for uni-directional types the band denotes cathode end, no cathode band on bi-directional types MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL (1) Peak pulse power dissipation with a 10/1000 s waveform PPPM Peak pulse current with a 10/1000 s waveform IPPM (1) Power dissipation TM = 50 C TA = 25 C Operating junction and storage temperature range VALUE UNIT 600 W See next table A PD (2) 5.0 PD (3) 1.0 TJ, TSTG -55 to +150 W C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Power dissipation mounted on infinite heatsink (3) Power dissipation mounted on minimum recommended pad layout Revision: 16-Jan-18 Document Number: 87606 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMBJ5.0D thru SMBJ188D, SMBJ5.0CD thru SMBJ120CD www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE (+)SMBJ5.0D (+)SMBJ6.0D (+)SMBJ6.5D (+)SMBJ7.0D (+)SMBJ7.5D (+)SMBJ8.0D (+)SMBJ8.5D (+)SMBJ9.0D (+)SMBJ10D (+)SMBJ11D (+)SMBJ12D (+)SMBJ13D (+)SMBJ14D (+)SMBJ15D (+)SMBJ16D (+)SMBJ17D (+)SMBJ18D (+)SMBJ20D (+)SMBJ22D (+)SMBJ24D (+)SMBJ26D (+)SMBJ28D (+)SMBJ30D (+)SMBJ33D (+)SMBJ36D (+)SMBJ40D (+)SMBJ43D (+)SMBJ45D (+)SMBJ48D (+)SMBJ51D (+)SMBJ54D (+)SMBJ58D (+)SMBJ60D (+)SMBJ64D (+)SMBJ70D (+)SMBJ75D (+)SMBJ78D (+)SMBJ85D (+)SMBJ90D (+)SMBJ100D (+)SMBJ110D (+)SMBJ120D (+)SMBJ130D (+)SMBJ150D (+)SMBJ160D (+)SMBJ170D SMBJ188D DEVICE MARKING CODE UNI 6AA 6AB 6AC 6AD 6AE 6AF 6AG 6AH 6AK 6AL 6AM 6AN 6AP 6AQ 6AR 6AS 6AT 6AU 6AV 6AW 6AX 6AY 6AZ 6BA 6BB 6BC 6BD 6BE 6BF 6BG 6BH 6BK 6BL 6BM 6BN 6BP 6BQ 6BR 6BS 6BT 6BU 6BV 6BW 6BX 6BY 6BZ 6CA BI 6AA 6AB 6AC 6AD 6AE 6AF 6AG 6AH 6AK 6AL 6AM 6AN 6AP 6AQ 6AR 6AS 6AT 6AU 6AV 6AW 6AX 6AY 6AZ 6BA 6BB 6BC 6BD 6BE 6BF 6BG 6BH 6BK 6BL 6BM 6BN 6BP 6BQ 6BR 6BS 6BT 6BU 6BV - BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. 6.50 6.97 6.77 7.27 7.33 7.87 7.90 8.48 8.46 9.08 9.03 9.69 9.57 10.3 10.2 10.9 11.3 12.1 12.4 13.3 13.5 14.5 14.6 15.7 15.8 17.0 17.0 18.2 18.1 19.4 19.2 20.6 20.3 21.8 22.5 24.2 24.8 26.6 27.1 29.1 29.3 31.5 31.6 33.9 33.8 36.3 37.3 40.0 40.6 43.6 45.1 48.4 48.5 52.1 50.8 54.5 54.1 58.1 57.6 61.8 60.9 65.4 65.4 70.2 67.7 72.7 72.2 77.5 79.0 84.8 84.6 90.8 88.1 94.4 95.7 103 102 109 113 121 124 133 135 145 146 157 170 182 181 194 192 206 212 228 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) (2) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (3) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 188 500 500 300 150 75 35 15 5.0 2.0 2.0 2.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 65.9 58.9 54.5 50.8 47.2 44.8 42.2 39.7 35.9 33.5 30.6 28.3 26.2 25.0 23.4 22.1 20.8 18.8 17.1 15.6 14.5 13.4 12.6 11.5 10.5 9.43 8.76 8.40 7.90 7.40 7.00 6.50 6.28 5.88 5.40 5.06 4.86 4.46 4.17 3.77 3.45 3.15 2.94 2.53 2.34 2.23 2.03 9.1 10.2 11.0 11.8 12.7 13.4 14.3 15.1 16.7 17.9 19.6 21.2 22.9 24.0 25.6 27.2 28.8 32.0 35.1 38.4 41.6 44.7 47.7 52.5 57.3 63.6 68.5 71.6 76.3 81.2 85.9 92.3 95.5 102 111 119 124 135 144 159 174 190 206 239 256 270 301 Notes * All terms and symbols are consistent with ANSI/IEEE C62.35 (1) Pulse test: t 50 ms p (2) For bi-directional types having V WM of 12 V and less, the ID limit is doubled (3) Surge current waveform per fig. 3 and derate per fig. 2 (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional device Revision: 16-Jan-18 Document Number: 87606 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMBJ5.0D thru SMBJ188D, SMBJ5.0CD thru SMBJ120CD www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient Typical thermal resistance, junction to mount SYMBOL VALUE RJA (1) 125 RJA (2) 100 RJM 20 UNIT C/W Notes (1) Mounted on minimum recommended pad layout (2) Mounted on 5.0 mm x 5.0 mm copper pad area ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMBJ5.0D-M3/H 0.096 H 750 7" diameter plastic tape and reel SMBJ5.0D-M3/I 0.096 I 3200 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 10 1 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas 0.1 tr = 10 s 100 Peak value IPPM Half value - IPP/2 50 10/1000 s waveform as de ned by R.E.A. td 0 10 100 1000 0 10 000 td - Pulse Width (s) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 tp - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 10000 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % TJ = 25 C pulse width (td) is de ned as the point where the peak current decays to 50 % of IPPM 75 50 25 0 Measured at zero bias 1000 100 Measured at stand-off voltage, VWM 10 Uni-Directional Bi-Directional TJ = 25 C f = 1.0 MHz 1 0 25 50 75 100 125 150 TJ - Initial Temperature (C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature 1 10 100 VWM - Reverse Stand-Off Voltage (V) Fig. 4 - Typical Junction Capacitance Revision: 16-Jan-18 Document Number: 87606 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMBJ5.0D thru SMBJ188D, SMBJ5.0CD thru SMBJ120CD Vishay General Semiconductor 6 Transient Thermal Impedance (C/W) PM(av) - Steady State Power Dissipation (W) www.vishay.com TA=TM mounted on inifinite heatsink 5 4 3 2 Mounted on minimum recommend pad layout 1 0 0 25 50 75 100 125 150 1000 Junction to Ambient Mounted on minimum recommend pad area 100 10 1 Mounted on 5.0 x 5.0 mm copper pad area 0.1 0.001 0.1 10 1000 tp - Pulse Duration (s) TA - Ambient Temperature (C) Fig. 5 - Power Dissipation Derating Curve Fig. 6 - Typical Transient Thermal Impedance Note * Fig.1, 10 000 s Pppm is actual test for VWM 60 V types, over 60 V types 10 000 s Pppm is curve extensional value PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMB (DO-214AA) Cathode Band 0.086 (2.20) Mounting Pad Layout 0.155 (3.94) 0.130 (3.30) 0.077 (1.95) 0.085 (2.159) MAX. 0.180 (4.57) 0.160 (4.06) 0.086 (2.18) MIN. 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.220 REF. 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 16-Jan-18 Document Number: 87606 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000