©2014 Amprobe® For detailed specications and ordering go to www.Amprobe.com 6003578 BAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AMP-300 Series
Features
• True-RMS
• Motor Testing Capabilities
- Motor rotation
- 3-phase sequence testing
- Inrush current monitoring
during motor start-up
• HVAC Features
- Temperature measurement;
User selectable °F or °C
- DC Microamps for flame
sensor testing
- Capacitance measurement
for start and run motor
capacitors
• Amp-Tip Function
• Low Pass Filter for variable
frequency drives
• Safety Rated:
CAT III 600 V (AMP-310, AMP-320)
CAT IV 600 V, CAT III 1000 V (AMP-330)
AMP-310
AC Clamp Meter
HVAC
AMP-320
AC/DC Clamp Meter
Electrical Motor
Maintenance
AMP-330
AC/DC 1000 A Clamp Meter
Industrial Motor
Maintenance
AMP-300 Series
Motor Maintenance TRMS Clamp Meters
The Modern Evolution of the Professional Clamp Meter
Amprobe’s AMP-300 Series True-RMS Clamp Meters offer a complete range of measuring
functions for modern industrial environments, motor testing and HVAC applications.
All models feature True-RMS sensing, low pass lters and fast response processors for
quick, error-free measurements. The Amp-Tip function allows for precise measurement of
current down to the tenth of an Amp, and a third input jack enables motor rotation and
3-phase sequence testing.
©2014 Amprobe® For detailed specications and ordering go to www.Amprobe.com 6003578 BAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AMP-300 Series Applications
• Accurate measurement of current,
voltage and frequency on all
electrical systems including distorted,
non-sinusoidal signals (True-RMS
function) and variable frequency drives
(low pass lter).
• Capacitance measurement for start
and run motor capacitors.
• Resistance and continuity functions to
verify quality of electrical connections and
to check if motor and transformer coils
are working properly.
• 3-phase Motor and Phase Rotation
Tests allow proper connection of a
motor to a 3-phase system. Improperly
connected motors will spin in a reverse
direction, which may destroy the motor
or equipment connected to it.
• Low Pass lter allows measurement of
current and voltage on variable frequency
drives (motors with speed controlled by
frequency). Without this feature, the
meter would provide erroneous readings
when measuring voltage and current.
• DC Microamps output for measurement
of ame sensors. Test the proper
operation of the ame sensor safety
system in gas appliances. A broken
sensor in a gas appliance will prevent
the safety valve from opening and the
appliance will not work.
• Inrush current measurement for motor
start-up monitoring, allowing users to
verify that the motor is receiving the
required inrush current to support proper
motor start.
True-RMS
for accurate voltage
measurements in noisy
environments.
Low pass lter
for current and voltage
measurements on variable
frequency drives.
Amp-Tip function
for precise low-current
measurement of small
diameter wires down to 0.1
Amp to help with electrical
system troubleshooting.
Non-contact voltage
detection (NCV)
Audible continuity and
diode test
Data hold, relative zero,
MAX/MIN/AVG mode
Large LCD backlit
display
Safety rated
CAT III 600 V
(AMP-310, AMP-320)
CAT IV 600 V
CAT III 1000 V
(AMP-330)
Measurements:
AMP-300 Series Product Details
Model AMP-310 AMP-320 AMP-330
Safety Rating
CAT III 600 V CAT III 600 V CAT IV 600 V
CAT III 1000 V
Voltage
Up to 600 V AC/DC Up to 600 V AC/DC Up to 1000 V AC/DC
AC Current
Up to 600 A Up to 600 A Up to 1000 A
DC Current
–Up to 600 A Up to 1000 A
Frequency
5 to 999 Hz
Resistance 0 to 60 kΩ
Capacitance 0.0 to 2500 µF
Temperature • • •
AMP-310
AC Clamp Meter HVAC
AMP-320 AC/DC Clamp Meter
Electrical Motor Maintenance
AMP-330 AC/DC 1000 A Clamp Meter
Industrial Motor Maintenance
Model AMP-210 AMP-220 AMP-310 AMP-320 AMP-330
AC Clamp Meter
Electrical
AC/DC Clamp Meter
Electrical
AC Clamp Meter
HVAC
AC/DC Clamp Meter
Electrical Motor
Maintenance
AC/DC 1000 A Clamp Meter
Industrial Motor Maintenance
Safety Rating
CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT IV 600 V, CAT III 1000 V
Jaw Opening
1.18 in (30 mm) 1.37 in (35 mm) 1.18 in (30 mm) 1.37 in (35 mm) 2.0 in (51 mm)
AC Voltage
(True-RMS)
Range: 0 to 600.0 V
Accuracy: ±1.0% + 5LSD (50 to 60 Hz)
Range: 0 to 600.0 V
Accuracy: ±1.0% + 5LSD (50 to 60 Hz)
Range: 0 to 1000 V
Accuracy: ±0.8% + 5LSD (50 to 60 Hz)
±1.5% + 5LSD (20 to 200 Hz)
±10% + 5LSD (200 to 400 Hz)
DC Voltage
Range: 0 to 600.0 V
Accuracy: ±1.0% + 5LSD
Range: 0 to 600.0 V
Accuracy: ±1.0% + 5LSD
Range: 0 to 1000 V
Accuracy: ±0.8% + 5LSD
AC+DC Voltage
–
Range: 0 to 600.0 V
Accuracy: 1.2% ± 7LSD (DC,
50 to 60 Hz)
–
Range: 0 to 600.0 V
Accuracy: 1.2% ± 7LSD (DC, 50
to 60 Hz)
Range: 0 to 1000 V
Accuracy:
±1.0% + 7LSD (50 to 60 Hz)
±1.8% + 7LSD (DC, 40 to 200 Hz)
±12% + 7LSD (200 to 400 Hz)
AC Current
(True-RMS)
Range: 0 to 600.0 A
Accuracy: ±1.8% + 5LSD (50 to 100 Hz)
±2.0% + 5LSD (100 to 400 Hz)
Range: 0 to 600.0 A
Accuracy: ±1.8% + 5LSD (50 to 100 Hz)
±2.0% + 5LSD (100 to 400 Hz)
Range: 0 to 1000 A
Accuracy:
±1.8% + 5LSD (40 to 100 Hz)
±2.2% + 5LSD (100 to 400 Hz)
DC Current
–
Range: 0 to 600.0 A
Accuracy: ±2.0% + 5LSD
–
Range: 0 to 600.0 A
Accuracy: ±2.0% + 5LSD
Range: 0 to 1000 A
Accuracy: ±1.8% + 5LSD
AC+DC Current
–
Range: 0 to 600.0 A
Accuracy: ±2.2% + 7LSD
(DC, 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz)
–
Range: 0 to 600.0 A
Accuracy: ±2.2% + 7LSD
(DC, 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz)
Range: 0 to 1000 A
Accuracy: ±2.2% + 7LSD (DC, 40 to 100 Hz)
±2.5% + 7LSD (100 to 400 Hz)
Precise Low
Current AC
Range: 0 to 60.00 A
Accuracy: ±1.5% + 5LSD (50 to 60 Hz)
Range: 0 to 60.00 A
Accuracy: ±1.5% + 5LSD (50 to 60 Hz)
Range: 0 to 60.00 A
Accuracy:
±1.5% + 5LSD (0.00 to 20.00 A, 40 to 100 Hz)
±2.0% + 5LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 5LSD (20.00 to 60.00 A, 40 to 100 Hz)
±3.0% + 5LSD (20.00 to 60.00 A, 100 to 400 Hz)
Precise Low
Current DC
–Range: 0 to 60.00 A
Accuracy: ±2.0% + 5LSD –Range: 0 to 60.00 A
Accuracy: ±2.0% + 5LSD
Range: 0 to 60.00 A
Accuracy: ±1.5% + 5LSD (0.00 to 20.00 A)
±3.0% + 5LSD (20.00 to 60.00 A)
Precise Low
Current AC+DC
–
Range: 0 to 60.00 A
Accuracy: ±2.0% + 5LSD
(DC, 50 to 60 Hz)
–
Range: 0 to 60.00 A
Accuracy: ±2.0% + 5LSD
(DC, 50 to 60 Hz)
Range: 0 to 60.00 A
Accuracy:
±2.0% + 7LSD (0.00 to 20.00 A, DC, 40 to 100 Hz)
±2.2% + 7LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 7LSD (20.00 to 60.00 A, DC, 40 to 100 Hz)
±3.0% + 7LSD (20.00 to 60.00 A, 100 to 400 Hz)
Frequency
Range: 5.00 to 999.9 Hz
Accuracy: ±1.0% + 5LSD (600 V range)
Range: 50.0 to 400.0 Hz
Accuracy: ±1.0% + 5LSD (600 A range)
Range: 5.00 to 999.9 Hz
Accuracy: ±1.0% + 5LSD (600 V range)
Range: 50.0 to 400.0 Hz
Accuracy: ±1.0% + 5LSD (600 A range)
Range: 5.00 to 999.9 Hz
Accuracy: ±1.0% + 5LSD (1000 V range)
Range: 40.0 to 400.0 Hz
Accuracy: ±1.0% + 5LSD (1000 A range)
Resistance
Range: 0.0 to 60.00 kΩ
Accuracy: ±1.0% + 5LSD
Range: 0.0 to 60.00 kΩ
Accuracy: ±1.0% + 5LSD
Capacitance
Range: 0.0 to 2500 µF
Accuracy: ±2.0% + 4LSD
Range: 0.0 to 2500 µF
Accuracy: ±2.0% + 4LSD
Continuity
Beeper
ON ≤ 10 Ω
OFF > 250 Ω
ON ≤ 10 Ω
OFF > 250 Ω
Non-Contact
Voltage
10V to 1000V AC, 50/60Hz 10V to 1000V AC, 50/60Hz
True-RMS
• • • • •
Low Pass Filter
• • • • •
Autoranging
• • • • •
Relative Zero
• • • • •
MAX/MIN/AVG
• • • • •
Diode Test
• • • • •
Data Hold
• • • • •
Backlight
• • • • •
Auto Power Off
• • • • •
300 Series:
DC Microamps
– – Range: 0.0 to 2000 µA
Accuracy: ±1.0% + 5LSD
Temperature*
(Type K
thermocouple)
*Error does not
include Type-K
thermocouple errors
– –
Range: -40.0 to 752°F, -40.0 to 400°C
Accuracy: -40.0 to 14.0°F (±1.0% +3.0°F), >14.0 to 99.9°F (±1.0% +1.5°F)
100 to 752°F (±1.0% +2°F), -40.0 to -10.0°C (±1.0% +1.5°C)
>-10.0 to 99.9°C (±1.0% +0.8°C), 100 to 400°C (±1.0% + 1°C)
3-Phase and
Motor Rotation
Indication
– – Rotation-R for mains supply
Rotation-M for motors
Inrush Current
– –
• • •
Peak Hold (Crest)
– – – –
•
Work Light
– – – –
•
AMP-200 and AMP-300
Detailed Specifications
©2014 Amprobe® For detailed specications and ordering go to www.Amprobe.com 6003578 BAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AMP-200 and AMP-300
General Specifications
Model AMP-210 AMP-220 AMP-310 AMP-320 AMP-330
Display 3-5/6 digits 6000 counts 3-5/6 digits 6000 counts 3-5/6 digits 6000 counts 3-5/6 digits 6000 counts 3-5/6 digits 6000 counts
Polarity Automatic Automatic Automatic Automatic Automatic
Update Rate
5 per second nominal 5 per second nominal 5 per second nominal 5 per second nominal 5 per second nominal
Operating
Temperature 32 to 104
°
F (0 to 40
°
C) 32 to 104
°
F (0 to 40
°
C)
32 to 104
°
F (0 to 40
°
C) 32 to 104
°
F (0 to 40
°
C)
14 to 122
°
F (-10 to 50
°
C)
Relative Humidity
80% at 30
°
C, 50% at 40
°
C
80% at 30
°
C, 50% at 40
°
C
80% at 30
°
C, 50% at 40
°
C80% at 30
°
C, 50% at 40
°
C
Non condensing at ≤10°C
90% at 10 to30°C
75% at 30 to 40°C
45% at 40 to 50°C
Operating Altitude
0 to 2000 m 0 to 2000 m
0 to 2000 m
0 to 2000 m 0 to 2000 m
Pollution Degree
2
2 2
2
2
Storage
Temperature
-4 to 140°F (-20°C to 60°C),
< 80% RH
-4 to 140°F (-20°C to 60°C),
< 80% RH
-4 to 140
°
F (-20
°
C to 60
°
C),
< 80% RH
-4 to 140°F (-20°C to 60°C),
< 80% RH
-4 to 140°F (-20°C to 60°C),
< 80% RH
Temperature
Coefcient
Nominal 0.15 x (specied
accuracy)/ °C @ (0°C to 18°C
or 28°C to 40°C)
Nominal 0.15 x (specied
accuracy)/ °C @ (0°C to 18°C
or 28°C to 40°C)
Nominal 0.15 x (specied
accuracy)/ °C @ (0°C to 18°C
or 28°C to 40°C)
Nominal 0.15 x (specied
accuracy)/ °C @ (0°C to 18°C or
28°C to 40°C)
Nominal 0.10 x (specied accuracy)/ °C @ (0°C
to 18°C or 28°C to 50°C)
Battery
Two AAA 1.5 V battery Two AAA 1.5 V battery Two AAA 1.5 V battery Two AAA 1.5 V battery Two AA 1.5 V battery
EMC
Meets EN 61326-1:2006 Meets EN 61326-1:2006 Meets EN 61326-1:2006 Meets EN 61326-1:2006 Meets EN 61326-1:2006
Safety Compliance
UL/IEC/EN 61010-1 ed. 3.0,
IEC/EN 61010-2-033 ed. 1.0,
CAN/CSA C22.2 NO. 61010-1
ed. 3.0, IEC/EN 61010-2-032
ed. 3.0 & IEC/EN 61010-031
ed. 1.1
UL/IEC/EN 61010-1 ed. 3.0,
IEC/EN 61010-2-033 ed. 1.0,
CAN/CSA C22.2 NO. 61010-1
ed. 3.0, IEC/EN 61010-2-032
ed. 3.0 & IEC/EN 61010-031
ed. 1.1
UL/IEC/EN 61010-1 ed. 3.0,
IEC/EN 61010-2-033 ed. 1.0,
CAN/CSA C22.2 NO. 61010-1
ed. 3.0, IEC/EN 61010-2-032
ed. 3.0 & IEC/EN 61010-031
ed. 1.1
UL/IEC/EN 61010-1 ed. 3.0, IEC/
EN 61010-2-033 ed. 1.0, CAN/CSA
C22.2 NO. 61010-1 ed. 3.0, IEC/
EN 61010-2-032 ed. 3.0 & IEC/EN
61010-031 ed. 1.1
UL/IEC/EN 61010-1 ed. 3.0, IEC/EN 61010-2-033
ed. 1.0, CAN/CSA C22.2 NO. 61010-1 ed. 3.0,
IEC/EN 61010-2-032 ed. 3.0 & IEC/EN 61010-
031 ed. 1.1
Certication UL (c/us) and CE UL (c/us) and CE UL (c/us) and CE UL (c/us) and CE UL (c/us) and CE
Dimensions
(L x W x H):
8.62 x 3.03 x 1.46 in
(219 x 77 x 37 mm)
8.82 x 3.03 x 1.46 in
(224 x 77 x 37 mm)
8.62 x 3.03 x 1.46 in
(219 x 77 x 37 mm)
8.82 x 3.03 x 1.46 in
(224 x 77 x 37 mm)
10.16 x 3.70 x 1.73 in
(258 x 94 x 44 mm)
Weight:
208 g (0.46 lb) 254 g (0.56 lb) 208 g (0.46 lb) 254 g (0.56 lb) 420 g (0.93 lb)
Accessories
Included:
User’s Manual
• • • • •
Test Leads
• • • • •
Carrying Case
• • • • •
Batteries
AAA (2) AAA (2) AA (2)
Alligator Clip Set
– –
• • •
Banana plug K-type
Thermocouple
– –
• • •
For complete information about Amprobe test tools, visit www.Amprobe.com
Amprobe®
info@amprobe.com
Fluke Corporation, Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
© 2014 Amprobe | Specications subject to change without notice. Printed In U.S.A. 6003578 B
