Libertyville, IL (847) 680-7400
A
6
ASeries
High Performance 3-Phase
RFI Power Line Filters for
WYE Applications
UL Recognized
CSA Certified
TUV Approved*
A Series
The 3-phase filters are designed for 3-phase, four wire,
WYE applications providing filtering in each of the three
lines plus the neutral and ground line.
The 3-phase models feature:
•Both common mode and differential mode
suppression from 50 kHz to 30 MHz
•Effective for both balanced and unbalanced three
phase loads
•Ground choke included
•Made to IEC 380 specifications
•Shielded construction
The dual stage AYT provides higher performance,
while the single stage AYP is good for lower noise
environments.
Specifications
Maximum leakage current, each
line-to-ground@ 120 VAC 60 Hz:1.4 mA
@ 250 VAC 50 Hz:3.4 mA
Hipot rating (one minute):
line-to-ground1500 VAC
neutral-to-ground1500 VAC
line-to-neutral1450 VDC
Operating frequency:50/60 Hz
Rated voltage:
phase-to-phase440 VAC
phase-to-neutral/ground250 VAC
Minimum insertion loss in dB:
* 20AYT6C and 60AYT6Conly.
Line-to-ground in 50 ohm circuit
Current
Rating.05.1.15.5151030
AYP6C
20A2232395556656554
30A1524305555616350
45A819254949565845
60A516225050545447
AYT6C
20A4563707575757565
30A2953617575757560
45A1536437575757550
60A1237467575757045
Line-to-line in 50 ohm circuit
Current
Rating.05.1.15.5151030
AYP6C
20A2038506565656052
30A1828436565655948
45A820276065655643
60A2024276065655650
AYT6C
20A2756657070707070
30A1746557575757570
45A1441507575757565
60A2650587575757560
Frequency–MHz
Frequency–MHz
Resistor location for reference only.
AYT6C Models
AYP6C Models
Electrical Schematics
AYP / AYT
Libertyville, IL (847) 680-7400
A
7
Case Style
Metric shown in italics.
AYP6C & AYT6C
Case Dimensions
Metric shown in italics.
Part No.A*B C D E
(max)(max)(max)± .030± .015
± .76± .38
20AYP6C8.825.572.564.6161.5
224.0141.565.0117.238.1
30AYP6C8.825.572.564.6161.5
224.0141.565.0117.238.1
45AYP6C9.436.924.825.953.75
239.5175.8122.4151.195.3
60AYP6C9.436.924.825.953.75
239.5175.8122.4151.195.3
20AYT6C13.825.572.564.6161.5
351.0141.565.0117.238.1
30AYT6C13.825.572.564.6161.5
351.0141.565.0117.238.1
45AYT6C13.836.924.825.953.75
351.3175.8122.4151.195.3
60AYT6C13.836.924.825.953.75
351.3175.8122.4151.195.3
* For end bell covering terminals and connections, add:
20A&30A5.57
141.48
45A&60A6.45
163.83
Ordering Information
Consult your local Corcom sales representative for pricing.
Series A
End Bell Mounting Accessory
End Bell mounting accessory available in two sizes,
20/30 amp and 45/60 amp.
Mounting Hardware
Mounting Bracket Kit with KEPS Nuts:
AA400 (20/30 Amp)
AA405 (45/60 Amp)
End Bell Kit with KEPS Nuts:
AA406 (20/30 Amp)
AA407 (45/60 Amp)
Additional KEPS Nuts to Mount Filters:
AA401 10 Filters
Available Part Numbers
20AYP6C20AYT6C
30AYP6C30AYT6C
45AYP6C45AYT6C
60AYP6C60AYT6C
