H cross section A-A Nietmutter / riveted nut : 5,5 E J M3 #4-40 +0,13 threaded bolt / sleeve : 3,05 A M3 oder/ or Gewindebolzen / Hulse #4-40 Schnitt A-A / A A 3,7 6,4 K Nietmutter / riveted nut : 12 M3 F L G 6,3 -0,3 D 3,9 B C Polzahl / Part No. : No. of contacts : Anschluart / Type : Anforderungsstufe / Aufdruck / Zubehor / CRIMP-SNAP IN Terminal Length : 1 Logo : Class : ERNI 1 Accessory : Sonderausfuhrung / 16.4 25.0 8.0 12.5 11.0 6.3 19.3 10.8 1.5 0.8 15 39.1 24.7 33.3 8.0 12.5 11.0 6.3 27.5 10.8 1.5 0.8 25 53.0 38.5 47.0 8.0 12.5 11.0 6.3 41.3 10.8 1.5 0.8 37 69.3 54.9 63.5 8.0 12.5 11.0 6.3 57.7 10.8 1.5 0.8 50 67.0 52.5 61.1 10.8 15.4 11.0 6.3 55.3 13.6 1.5 0.8 A B C D E F 0.3 -0.2 0.2 -0.2 0.3 0.2 Sonstige Angaben siehe Fertigungsunterlagen / Information: Refer to table on page 2 Refer to table on page 2 G -0.3 H 0.3 J K 0.2 max. L 0.1 Missing information and dimensions according to DIN 41652 Fehlende Masse und Angaben siehe DIN 41652 / Refer to table on page 2 Refer to table on page 2 Special : 30.8 Polzahl/ No. of contacts Refer to table on page 2 Terminal Type : Anschlulange / Bauart / Refer to table on page 2 Additional indications please see the production documentation Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 9 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 27.04.1999 Date TMC-S 9 bis 50-CSI TMC-S 9 to 50-CSI www.ERNI.com c Index Designation M:00021176.SZN 054872 TMCS I Ordering Information D-Sub Connector Crimp Snap-in Vertical Female Number of Pins 9 15 25 37 50 014178 014180 014182 014184 Through hole 014176 Ordering Information for Crimp Contacts Loose contacts Reel 500 pieces Reel 10.000 pieces AWG 26-20 014234 014237 014240 AWG 28-24 014233 014236 014239 Version Ordering Information for Processing Tools Version Hand crimping tool for loose contacts AWG 20-28 (0.08-0.56 mm 2) 014374 Hand crimping tool for reels with 500 contacts incl. reel holder AWG 20-28 014375 Mounting and dismounting tool for AWG 20-28 014373 www.erni.com