Ordering number:ENN1426C PNP/NPN Epitaxial Planar Silicon Transistors 2SA1381/2SC3503 High-Definition CRT Display, Video Output Applications Package Dimensions * High breakdown voltage : VCEO300V. * Small reverse transfer capacitance and excellent high frequency characteristic : Cre=1.8 pF (NPN), 2.3pF (PNP), VCB=30V. * Adoption of MBIT process. unit:mm 2009B [2SA1381/2SC3503] 8.0 2.7 4.0 1.5 7.0 3.0 11.0 Features 3.0 1.6 0.8 0.8 0.6 15.5 0.5 ( ) : 2SA1381 2 3 1 : Emitter 2 : Collector 3 : Base SANYO : TO-126 1.2 1 2.4 4.8 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (-)300 V Collector-to-Emitter Voltage VCEO VEBO (-)300 V IC (-)100 mA ICP (-)200 mA 1.2 W Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg (-)5 V 7 W 150 C -55 to +150 C Tc=25C Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(-)200V, IE=0 (-)0.1 A Emitter Cutoff Current IEBO VEB=(-)4V, IC=0 (-)0.1 A DC Current Gain hFE fT VCE=(-)10V, IC=(-)10mA VCE=(-)30V, IC=(-)10mA Gain-Bandwidth Product 40* * : The 2SA1381/2SC3503 are classified by 10mA hFE as follows : Rank C D E F hFE 40 to 80 60 to 120 100 to 200 160 to 320 320* 150 MHz Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92502AS (KT)/71598HA (KT)/3107KI/D134MW, TS No.1426-1/5 2SA1381/2SC3503 Continued from preceding page. Parameter Symbol Output Capacitance Cob Reverse Transfer Capacitance typ VCB=(-)30V, f=1MHz VCE(sat) VBE(sat) Base-to-Emitter Saturation Voltage min VCB=(-)30V, f=1MHz Cre Collector-to-Emitter Saturation Voltage Ratings Conditions Unit max 2.6 pF (3.1) pF 1.8 pF (2.3) pF IC=(-)20mA, IB=(-)2mA (-)0.6 V IC=(-)20mA, IB=(-)2mA (-)1.0 V Collector-to-Base Breakdown Voltage V(BR)CBO IC=(-)10A, IE=0 (-)300 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(-)1mA, RBE= (-)300 V Base-to-Emitter Breakdown Votage V(BR)EBO (-)5 V IE=(-)10A, IC=0 IC -- VCE --20 2SA1381 --18 --140A --120A Collector Current, IC - mA --80A --10 --60A --8 --40A --6 --4 --20A --2 100A 16 14 80A 12 10 60A 8 40A 6 4 20A 2 0 0 --1 IB=0 --2 --3 --4 --5 --6 --7 --8 --9 --10 Collector-to-Emitter Voltage, VCE - V ITR03346 0 IB=0 0 1 2 3 4 5 2SC3503 --60A 9 60A --8 --50A 8 50A --7 --40A Collector Current, IC - mA --9 --30A --5 --4 --20A --3 --2 --10A --1 8 9 10 ITR03347 40A 6 30A 5 4 20A 3 2 10A 1 0 IB=0 --10 --20 --30 --40 --50 --60 --70 --80 --90 --100 Collector-to-Emitter Voltage, VCE - V ITR03348 0 IB=0 0 10 20 30 40 50 60 70 80 90 Collector-to-Emitter Voltage, VCE - V IC -- VBE --120 100 ITR03349 IC -- VBE 120 2SA1381 VCE=10V --100 2SC3503 VCE=10V --40 --20 80 --25C --25C Collector Current, IC - mA --60 25C Ta=75C Collector Current, IC - mA 100 --80 0 7 25C 0 7 IC -- VCE 10 2SA1381 --6 6 Collector-to-Emitter Voltage, VCE - V IC -- VCE --10 Collector Current, IC - mA 120A Ta=75C Collector Current, IC - mA --100A --12 2SC3503 18 --16 --14 IC -- VCE 20 60 40 20 0 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE - V --1.0 ITR03350 0 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE - V 1.0 ITR03351 No.1426-2/5 2SA1381/2SC3503 hFE -- IC 1000 2SA1381 VCE= --10V 7 5 DC Current Gain, hFE DC Current Gain, hFE Ta=75C 2 25C --25C 100 7 5 2SC3503 VCE=10V 7 5 3 hFE -- IC 1000 3 2 3 Ta=75C 2 25C --25C 100 7 5 3 2 10 7 5 7 2 --1.0 3 5 2 5 7 --100 5 3 2 100 7 5 3 2 7 --1.0 2 3 5 7 --10 2 3 5 Collector Current, IC - mA 7 --100 3 2 1.0 3 5 7 100 2 ITR03353 5 3 2 100 7 5 3 2 7 1.0 2 3 5 7 10 2 3 5 Collector Current, IC - mA 7 100 2 ITR03355 Cob -- VCB 2SC3503 f=1MHz 10 7 5 3 2 1.0 7 7 --1.0 2 3 5 5 2 3 5 7 --100 2 --10 Collector-to-Base Voltage, VCB -- V ITR03356 7 10 7 5 3 2 1.0 7 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 Collector-to-Base Voltage, VCB -- V ITR03358 7 1.0 2 3 5 7 10 2 3 5 7 100 2 ITR03357 Cre -- VCB 3 Reverse Transfer Capacitance, Cre - pF 2SA1381 f=1MHz 2 5 Collector-to-Base Voltage, VCB -- V Cre -- VCB 3 Reverse Transfer Capacitance, Cre - pF 2 2 7 5 5 7 10 2SC3503 VCE=30V 3 Output Capacitance, Cob - pF 5 5 7 ITR03354 7 3 fT -- IC 10 5 2 10 5 5 2 1000 2SA1381 f=1MHz 2 7 1.0 Collector Current, IC - mA Cob -- VCB 3 5 ITR03352 2SA1381 VCE=30V 5 5 2 fT -- IC 7 10 Output Capacitance, Cob - pF 3 --10 Collector Current, IC - mA 1000 Gain-Bandwidth Product, fT - MHz 7 Gain-Bandwidth Product, fT - MHz 10 2SC3503 f=1MHz 2 10 7 5 3 2 1.0 7 5 5 7 1.0 2 3 5 7 10 2 3 5 7 100 2 ITR03359 Collector-to-Base Voltage, VCB -- V No.1426-3/5 2SA1381/2SC3503 VCE(sat) -- IC --10 7 Collector-to-Emitter Saturation Voltage, VCE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 3 2 --1.0 7 5 3 2 --0.1 3 2 1.0 7 5 3 2 0.1 7 5 5 7 --1.0 2 3 7 2 3 --10 Collector Current, IC - mA 5 5 7 2 3 5 7 2 10 3 5 VBE(sat) -- IC 2SC3503 IC / IB=10 7 5 3 2 --1.0 7 100 2 ITR03361 Collector Current, IC - mA 10 2SA1381 IC / IB=10 Base-to-Emitter Saturation Voltage, VBE (sat) - V Base-to-Emitter Saturation Voltage, VBE (sat) - V 7 1.0 ITR03360 7 5 3 2 1.0 7 5 5 7 --1.0 2 3 5 7 2 3 --10 Collector Current, IC - mA 5 7 --100 2 3 op er era tio ati on (T c= n (T a= 2 Collector Current, IC - mA DC op 25 C ) 25 C ) --10 7 100 PC -- Ta 7 2 10 3 5 7 100 2 ITR03363 ASO 2SC3503 ICP=200mA IC=100mA D C DC op er at io n (T n c= 25 (T C a= 25 ) C ) op era tio 2 10 7 3 8 5 3 5 2 3 2 5 5 3 7 --100 --10 Collector-to-Emitter Voltage, VCE - V ITR03364 3 Collector Current, IC - mA 5 3 7 2 7 5 2 5 7 1.0 s 0 50 s 1m ms 10 7 s 0 50 s 1m ms 10 DC 5 3 2SA1381 I =-100mA --100 C 5 5 ITR03362 ICP=-200mA 2 7 3 2 ASO 3 Collector Current, IC - mA 3 5 2 --100 VBE(sat) -- IC --10 3 2SC3503 IC / IB=10 7 5 7 5 VCE(sat) -- IC 10 2SA1381 IC / IB=10 2 5 7 10 2 3 5 7 100 2 3 5 Collector-to-Emitter Voltage, VCE - V ITR03365 2SA1381 / 2SC3503 Collector Dissipation, PC - W 7 6 5 4 3 2 1.2 1 0 No hea t sink 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR03366 No.1426-4/5 2SA1381/2SC3503 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2002. Specifications and information herein are subject to change without notice. PS No.1426-5/5