HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Typical Applications ATTENUATORS - DIGITAL - SMT The HMC305SLP4E is ideal for both RF and IF Features Glitch Free State Transitions applications: 0.5 dB LSB Steps to 15.5 dB * Cellular Infrastructure TTL/CMOS Compatible Serial Data Interface * Wireless Infrastructure SPI Compatible Serial Output * Microwave Radio & VSAT * Test Instrumentation Excellent Attenuation Accuracy: 0.25 dB Typical Bit Error Single + 3.3V to 5V Supply Functional Diagram ESD rating: Class 2 (2kV HBM) Drop-in Replacement for HMC305ALP4E General Description The HMC305SLP4E is a broadband 5-bit positive control Silicon IC digital attenuator with CMOS compatible serial-to-parallel driver package in a leadless QFN 4x4 mm SMT package. Covering 0.4 to 6 GHz, the insertion loss is typically less than 1.6 dB. The attenuator bit values are 0.5 (LSB), 1, 2, 4, and 8 dB for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at 0.25 dB typical with an IIP3 of up to +52 dBm. Five bit serial control words are used to select each attenuation state. A single Vcc bias of +3.3V to +5V is required. Electrical Specifications, TA = +25 C, Vcc = +3.3V to +5V Parameter Typical Max. Units 0.4 - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 3.8 GHz 3.8 - 6.0 GHz 6.0 - 7.0 GHz 1.0 1.1 1.2 1.3 1.6 1.8 1.5 2.0 2.3 2.5 2.5 2.5 dB dB dB dB dB dB Attenuation Range 0.4 - 7.0 GHz 15.5 dB Return Loss (RF1 & RF2, All Atten. States) 0.4 - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 3.8 GHz 3.8 - 6.0 GHz 6.0 - 7.0 GHz 25 25 25 25 20 15 dB dB dB dB dB dB Attenuation Accuracy: (Referenced to Insertion Loss) All Attenuation States 0.4 - 0.9 GHz 0.9 - 2.2 GHz 2.2 - 3.8 GHz 6.0 - 7.0 GHz (0.5 +5% of Atten. Setting) Max (0.3 +4% of Atten. Setting) Max (0.5 +5% of Atten. Setting) Max (0.5 +5% of Atten. Setting) Max dB dB dB dB Input Power for 0.1 dB Compression 0.4 - 6.0 GHz 28 dBm Input Third Order Intercept Point (Two-tone Input Power = 16 dBm Each Tone) 0.4 - 3.8 GHz 3.8 - 6.0 GHz 6.0 - 7.0 GHz 52 50 48 dBm dBm dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (Latch Enable to 10/90% RF) 0.4 - 7.0 GHz 70 160 ns ns Insertion Loss 1 Frequency Information furnished furnished by by Analog Analog Devices Devices is is believed believed to to be be accurate Information accurate and and reliable. reliable. However, However, no no responsibility is is assumed assumed by by Analog Analog Devices Devices for for its its use, use, nor nor for responsibility for any any infringements infringements of of patents patents or or other other rights of of third third parties parties that that may may result rights result from from its its use. use. Specifications Specifications subject subject to to change change without without notice. notice. No No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Trademarks and registered trademarks are the property of their respective owners. Min. For For price, price, delivery, delivery, and and to to place place orders: orders: Analog Analog Devices, Devices, Inc., Inc., One One Technology Technology Way, Way, P.O. P.O. Box Box 9106, 9106, Norwood, Norwood, MA MA 02062-9106 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Phone: 781-329-4700 * Order online at www.analog.com Application Application Support: Support: Phone: Phone: 1-800-ANALOG-D 1-800-ANALOG-D HMC305S* PRODUCT PAGE QUICK LINKS Last Content Update: 10/04/2017 COMPARABLE PARTS DESIGN RESOURCES View a parametric search of comparable parts. * HMC305S Material Declaration * PCN-PDN Information EVALUATION KITS * Quality And Reliability * HMC305S Evaluation Board * Symbols and Footprints DOCUMENTATION DISCUSSIONS Data Sheet View all HMC305S EngineerZone Discussions. * HMC305S: Glitch Free 0.5 dB 5-Bit Serial Control Silicon Digital Attenuator, 0.4-7.0 GHz Data Sheet SAMPLE AND BUY TOOLS AND SIMULATIONS Visit the product page to see pricing options. * HMC305SLP4E IBIS Model TECHNICAL SUPPORT * HMC305SLP4E S-Parameters Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified. HMC305S* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017 COMPARABLE PARTS DESIGN RESOURCES View a parametric search of comparable parts. * HMC305S Material Declaration * PCN-PDN Information EVALUATION KITS * Quality And Reliability * HMC305S Evaluation Board * Symbols and Footprints DOCUMENTATION DISCUSSIONS Data Sheet View all HMC305S EngineerZone Discussions. * HMC305S: Glitch Free 0.5 dB 5-Bit Serial Control Silicon Digital Attenuator, 0.4-7.0 GHz Data Sheet SAMPLE AND BUY TOOLS AND SIMULATIONS Visit the product page to see pricing options. * HMC305SLP4E IBIS Model TECHNICAL SUPPORT * HMC305SLP4E S-Parameters Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Frequency Response Plots 0.5 to 4 GHz Insertion Loss Return Loss RF1, RF2 (Only Major States are Shown) 0 RETURN LOSS (dB) INSERTION LOSS (dB) -10 -1 -1.5 -2 -2.5 -20 -30 -40 -3 -50 -3.5 -4 0.5 1 1.5 2 2.5 3 3.5 -60 0.5 4 1 1.5 +25C +85C 2.5 I.L 0.5 dB 1 dB -40C Normalized Attenuation 3 0 4 2 dB 4 dB 8 dB 15.5 dB 1 -2 0.75 BIT ERROR (dB) -4 -6 -8 -10 0.5 0.25 0 -12 -0.25 -14 -16 0.5 -0.5 1 1.5 2 2.5 3 3.5 0 4 2 4 6 8 10 12 14 16 ATTENUATION STATE (dB) FREQUENCY (GHz) 0.5 dB 2 dB 8 dB 1 dB 4 dB 15.5 dB 0.9 GHz 1.9 GHz 2.4 GHz 3.5 GHz Bit Error vs. Frequency Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) 3 60 RELATIVE PHASE (deg.) BIT ERROR (dB) 3.5 Bit Error vs. Attenuation State (Only Major States are Shown) NORMALIZED ATTENUATION (dB) 2 FREQUENCY (GHz) FREQUENCY (GHz) ATTENUATORS - DIGITAL - SMT 0 -0.5 2 1 0 40 20 0 -20 -40 -1 0.5 -60 1 1.5 2 2.5 3 3.5 4 0 0.5 1 FREQUENCY (GHz) 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0.5 dB 2 dB 8 dB 1 dB 4 dB 15.5 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 15.5 dB Note: All Data Typical Over Voltage (+3V to +5V) & Temperature (-40C to +85C). Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 2 HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Step Error vs. Frequency STEP ERROR (dB) 0.8 0.4 0 -0.4 -0.8 -1.2 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0.5 dB 2 dB 8 dB 1 dB 4 dB 15.5 dB Frequency Response Plots 0.4 to 8 GHz Return Loss RF1, RF2 Insertion Loss (Only Major States are Shown) 0 0 -0.5 -10 -1 RETURN LOSS (dB) INSERTION LOSS (dB) ATTENUATORS - DIGITAL - SMT 1.2 -1.5 -2 -2.5 -20 -30 -40 -3 -50 -3.5 -4 -60 0 1 2 3 4 5 6 7 0 8 1 2 3 +25C +85C I.L 0.5 dB 1 dB -40C Normalized Attenuation 0 1.25 -2 1 -4 BIT ERROR (dB) NORMALIZED ATTENUATION (dB) 5 6 7 8 2 dB 4 dB 8 dB 15.5 dB Bit Error vs. Attenuation State (Only Major States are Shown) -6 -8 -10 0.75 0.5 0.25 0 -12 -0.25 -14 -16 -0.5 0 1 2 3 4 5 6 7 8 0 2 4 6 8 10 12 14 16 ATTENUATION STATE (dB) FREQUENCY (GHz) 3 4 FREQUENCY (GHz) FREQUENCY (GHz) 0.5 dB 2 dB 8 dB 1 dB 4 dB 15.5 dB 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz 7 GHz 8 GHz Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Bit Error vs. Frequency Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) 2 1 0 40 20 0 -20 -40 -1 -60 0 1 2 3 4 5 6 7 8 0 1 2 FREQUENCY (GHz) 0.5 dB 1 dB 3 4 5 6 7 8 FREQUENCY (GHz) 2 dB 4 dB 8 dB 15.5 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 15.5 dB Step Error vs. Frequency 1.2 STEP ERROR (dB) 0.8 0.4 0 -0.4 ATTENUATORS - DIGITAL - SMT 60 RELATIVE PHASE (deg.) BIT ERROR (dB) 3 -0.8 -1.2 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0.5 dB 1 dB 2 dB 4 dB 8 dB 15.5 dB Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 4 HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz 0.1 dB and 1 dB Input Compression Point, 3.3V to 5V 1 dB Input Compression Point, Over Temp., 3.3V to 5V 36 INPUT COMPRESSION (dBm) 36 INPUT COMPRESSION (dBm) 34 32 30 28 26 24 22 34 32 30 28 26 24 22 20 0 20 0 1 2 3 4 5 1 2 3 4 5 6 FREQUENCY (GHz) 6 FREQUENCY (GHz) +25C 0.1dB Compression +85C -40C 1dB Compression Input Third Order Intercept Point over Temp., 3.3V to 5V 60 58 56 54 IP3 (dBm) ATTENUATORS - DIGITAL - SMT Power Handling Plots 0.1 to 6 GHz 52 50 48 46 44 42 40 0 1 2 3 4 5 6 FREQUENCY (GHz) +25C 5 +85C -40C Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Timing Symbol Vcc = +5V Min. Vcc = +3V Max. Min. Units Max. Serial Input Setup Time ts 20 - 100 - ns Hold time from Serial Input to Shift Clock th 0 - 5 - ns tlsup 40 - 100 - ns Setup time from Shift Clock to Latch Enable Propagation delay, Latch Enable to C0.5 through C8 tpd Setup time from Reset to Shift Clock - 20 - 50 - ns fclk - 30 - 10 MHz Clock Frequency (1/tclk) - 30 - 70 State Vcc = +5V Vcc = +3V Low 0 to 1.3V 0 to 0.7V High 3.5 to 5V 2.3 to 3V Serial Input Truth Table Latch Enable ns Shift Clock Reset Function X X L Shift register cleared X a H Shift register clocked a X H Contents of shift register transferred to Digital Attenuator Truth Table Serial Control Input Attenuation Setting RF1 - RF2 C 0.5 C1 C2 C4 C8 High High High High High Reference I.L. Low High High High High 0.5 dB High Low High High High 1 dB High High Low High High 2 dB High High High Low High 4 dB High High High High Low 8 dB Low Low Low Low Low 15.5 dB Max. Atten. ATTENUATORS - DIGITAL - SMT Parameter Digital Control Voltages Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. Timing Diagram Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 6 HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz ATTENUATORS - DIGITAL - SMT Logic / Functional Diagram Programming Example to Select 0.5 dB Attenuation State 7 Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Pin Descriptions Function Description 1, 3, 4, 6, 10, 12, 13, 15, 16, 18 N/C These pins are not connected internally. However, all data shown herein was measured with these pins connected to RF/DC Ground. 2, 17 RF1, RF2 This pin is DC coupled and matched to 50 Ohms Blocking capacitors are required. Select value based on lowest frequency of operation. 5 Serial Output Serial data output. Serial input data delayed by 8 clock cycles 7 Reset Interface Schematic ATTENUATORS - DIGITAL - SMT Pin Number See truth table, control voltage table and timing diagram. 8 Shift Clock 9 Latch Enable 11 Serial Input 14 Vcc Supply Voltage. 19 - 24 GND Package bottom has an exposed metal paddle that must also be connected to RF/DC Ground. Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 8 HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz ATTENUATORS - DIGITAL - SMT Application Circuit DC blocking capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest customer specific frequency to pass with minimal loss. 9 Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz Operating Range Digital Inputs (Reset, Shift Clock, Latch Enable & Serial Input) -0.3 to Vcc + 0.5 V Digital Inputs (Reset, Shift Clock, Latch Enable & Serial Input) 0 to Vcc V Bias Voltage (Vcc) -0.3 to 5.5 V Bias Voltage (Vcc) +3.0 to 5.4 V RF Input Power at 85 C +27 dBm RF Input Power at 85 C +24 dBm RF Input Power at 105 C +26 dBm RF Input Power at 105 C +22.5 dBm Storage Temperature -65 to +150 C Operating Temperature -40 to +105 C Thermal Resistance (at maximum power dissipation) 82 C/W ESD Sensitivity (HBM) Class 2 (2kV) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. ATTENUATORS - DIGITAL - SMT Absolute Maximum Ratings 10 HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz ATTENUATORS - DIGITAL - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC305SLP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL3 [1] Package Marking [2] H305S XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 11 Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC305SLP4E v01.1015 GLITCH FREE 0.5 dB 5-BIT SERIAL CONTROL SILICON DIGITAL ATTENUATOR, 0.4 - 7.0 GHz ATTENUATORS - DIGITAL - SMT Evaluation Circuit Board List of Materials for Evaluation PCB EV1HMC305SLP4 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 18 Pin DC Connector J4, J5 Thru Hole Mount Test Point C1, C2 100 pF Capacitor, 0402 Pkg. C5 10000 F Capacitor, 0402 Pkg. C6 4.7 uF Capacitor, 0603 Pkg. U1 HMC305SLP4E Digital Attenuator PCB [2] 600-01221-00 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown below. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board as shown is available from Analog Devices Inc. upon request. [2] Circuit Board Material: Rogers 4350 Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 12