1
Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
MS-166 Series
NEWNEW
2008.5
■Overview
Developed for inspection of high frequency circuits used in
portable terminals.Verification of the circuit performance is
accomplished by simply inserting the external plug
in the
board mounted receptacle.This action re-directs the circuit
from normal condition to the plug side. Removing the plug
restores circuit to its normal condition.
■Features
1. Low insertion loss
0.15 dB typical at 2.5 GHz (not mated with the plug).
0.2 dB typical at 6 GHz (not mated with the plug).
0.4 dB typical at 11 GHz (not mated with the plug).
2. Space-saving design
2.3 mm x 2.3 mm occupied board space.
3. Low profile
1.2 mm protrusion above the board.
4. Lightweight
0.016 g. total weight (without vacuum cap).
5. Miniaturization of Equipment Holes
The outside diameter of the tip of the plug connectors is a
narrow 2.8 mm which permits a great reduction in the size
of the equipment holes.
6. Durability
50 mating/unmating cycles, with corresponding plug.
7.
Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11 GHz.
8.
Board placement with automatic equipment
Packaged on tape-and-reel. Also available with a
vacuum pick-up cap over each switch.
9.
RoHS compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
■Applications
Portable terminals, ETC, notebook computers (Bluetooth),
wireless LAN, POS terminals, GPS terminals, PDA, and any
small devices requiring verification of antenna/circuit
performance.
Space-saving design
Low profile -1.2 mm protrusion above the board.
Lightweight -0.016 g. total weight.
2.7 2.30.35
2.3
2-0.4
0.5
2.7
1.6
1.2
MS-156HF
■Footprint
■Height
■Weight
MS-166
22% saving of space
25% lower profile
36% lighter weight
0.025g 0.016g
Comparison with the existing MS-156HF
●SMA conversion adapters
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
■Product Specifications
Operating temperature range
Rated power
Frequency range
V.S.W.R.
Insertion loss
Isolation loss
–40ç to +85ç
2W
DC to 11GHz DC to 8GHz
Not mated with the plug Open Mated with (MS-166-HRMJ-1)
1.2 max. (DC to 2.5GHz)
1.3 max. (2.5GHz to 6GHz)
1.5 max. (6GHz to 11GHz)
1.4 max. (DC to 3GHz)
1.8 max. (3GHz to 8GHz)
0.15 dB max. (DC to 2.5GHz)
0.20dB max. (2.5GHz to 6GHz)
0.40dB max. (6GHz to 11GHz)
0.5 dB max. (DC to 3GHz)
0.7 dB max. (3GHz to 8GHz)
———————
20 dB min. (DC to 3GHz)
15 dB min. (3GHz to 6GHz)
12 dB min. (6GHz to 11GHz)
■Materials
Part
Shell
Insulator A
Insulator B
Common terminal
Antenna terminal
Phosphor bronze
LCP
Polyamide
Beryllium copper
Phosphor bronze
Gold plated
——————
Partially gold plated
Partially gold plated
——————
UL94V-0
UL94HB
——————
——————
Material Finish Remarks
Item Specification Conditions
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Vibration
5. Thermal shock
6. Temperature cycle
7.
Hight temperature exposure
8.
Low temperature exposure
9. Humidity
10. Durability
(mating/un-mating, with
corresponding plug)
100 mømax.
1000 Mømin.
No flashover or insulation breakdown
No electrical discontinuity of 1 μs or longer
No electrical discontinuity of 1 μs or longer
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
100 mA
100 V DC
100 V AC / 1 minute
Frequency: 10 to 55 Hz, single amplitude of 1.5 mm,
2 hours in each of the 3 axis.
Acceleration of 490 m/s2, 6 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
Temperature: –55ç/+15çto +35ç/+85ç/+15çto +35ç
Time: 30 /2 to 3 /30 /2 to 3 (Minutes)
100 cycles
96 hours at 85ç
96 hours at -55ç
96 hours at 40±2ç, and humidity of 90 to 95%
50 cycles
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
BHigh Frequency Characteristics (Typical)
2
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
V.S.W.R.
01234567891011
[GHz]
Insertion loss
[dB]
V.S.W.R.
Insertion Loss
V.S.W.R.
Insertion Loss
2
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
V.S.W.R.
012345678
[GHz]
Insertion loss
[dB]
Isolation
0
5
10
15
20
25
30
35
40
45
50 012345678
[GHz]
Isolation [dB]
●NORMALLY CLOSED(N.C) ~ (Not mated with the plug)
●OPEN(N.O) ~ (Mated with the plug)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
■Receptacle
0.35 2.3
A terminalC terminal
0.5
2.3
0.4
0.4
0.45
Ø1.64
1.2
BRecommended PCB mounting patternand metal mask dimensions
area show the conductive pattern prohibited area.
Metal mask dimensions
PCB mounting pattern
0.1 to 0.12mm thick
A terminal
C terminal
C terminal A terminal
(3.45)
0.65
2.3
2.05
0.5
2.55
1.1
0.6
0.6
2.45
1.45
0.5
0.3
(3.35)
2.65
1.95
0.4
0.5
0.5
0.95
BCircuit diagram
GGG
B
G
A
C
G
G
A
C
G
B
G
MS-166 Plug MS-166 MS-166 Plug MS-166
Not mated with the plug (N.C) Mated with the plug (N.O)
MS-166
MS-166 (01)
Part Number
358-0229-3
358-0229-3-01
CL No.
2,000 pieces/reel
10,000 pieces/reel
Packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
BPrecautions
1. Do not use the washing process.
2. This product is intended to be used for circuit inspection only. Consult us if any other application
is considered.
3. Plugs can be roughly classified to two types.
- For mass production line automatic check (Press down type)
- For manual check (With retentive lock) : Unable to be used at production line.
4. Do not use hand soldering for mounting of MS-166.
Doing so could result in solder and flux wicking to the contact areas.
5. When using a heat gun, hot plate, or similar methods, limit the temperature to 260
ç
applied
for 10 seconds max.
6. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces.
Placing conductive traces in this area may affect performance and will void product warranties.
When the bottom surface of the product (i.e., the shaded area of the specified land
dimensions diagram on the previous page) has been processed with a susbtrate copper trace
and resist processing, Hirose Electric will not be able to warrant the product.
7. Please refrain from using the product in environments specifically affected by excessive
vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures
such as outdoor equipment. It might cause degradation or destruction of the product. Even if it
endures during a short time, long time quarification is not quaranteed.
8. Exercise caution as not to allow any debris to enter the board mounted MS-166 when cutting
PCB.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
BRecommended Temperature profile
10 sec. max
40 sec. max90~120 sec.
50
100
150
180
200
260
230
Time (sec.)
Temperature
(ç)
Maximum temperature
Peak temperature time
230ç min.
180ç to 200ç
: 260ç
: 10 sec. max.
: 40 sec. max.
: 90 to 120 sec. max.
q
w
e
r
●Typical Lead-free Solder Paste
Metal mask thickness: 0.1 to 0.12mm
Reflow cycles: 2 cycles
BPackaging Specifications
Unreeling direction
Ø13
R
Ø50
12.4
●Reel dimensions
Part Number
MS-166
MS-166 (01)
Reel diameter
180 mm
380 mm
2,000 pieces/reel
10,000 pieces/reel
Packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
■SMA Conversion Adapters
●Press down, with flange
●Floating
●Simplified lock, straight
(27.15)
Ø5.4
Ø2.8
6.75
18.65
17.65
6.62
8.5
1
8
2-R10
14
2- Ø2.6
1/4-36UNS-2A
Ø8.6
· Mates perpendicularly with the MS-166 and should be used with a load of 5.5 to 10 N applied.
· The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle.
· Mates perpendicularly with the MS-166 and should be used in specified the spring stroke range of this product.
· The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle.
· Equipped with an easy lock mechanism that can maintain mating with the MS-166, but should be used while maintaining a condition of
mating perpendicularity.
· The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle.
(34.15)
Ø10.3
Ø5.4
Ø2.8
6.75 6.62
26.29
10.42 2.5
7.86
6.3
1/4-36UNS-2A
12
2-R12
20
2-
Ø
2.6
2-R6.4
Ø3.1
Ø8
Ø5.5
1.3
Ø0.3
Ø6.8
(26.81)
(25.51)
(0.71)
8.56 4 6.3
1/4-36UNS-2A
Part Number CL No. Durability
358-0239-7MS-166-HRMJ-1 10,000 Times
Part Number CL No. Durability
358-0230-2MS-166-HRMJ-F1 10,000 Times
Part Number CL No. Durability
358-0241-9MS-166-HRMJ-H1 500 Times
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.