The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz MS-166 Series Space-saving design Low profile -1.2 mm protrusion above the board. Lightweight -0.016 g. total weight. Overview Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. Comparison with the existing MS-156HF MS-156HF MS-166 Footprint Features 2.7 2.3 2.7 2.3 1. Low insertion loss 0.15 dB typical at 2.5 GHz (not mated with the plug). 0.2 dB typical at 6 GHz (not mated with the plug). 0.4 dB typical at 11 GHz (not mated with the plug). 0.5 2-0.4 0.35 22% saving of space 2. Space-saving design 2.3 mm x 2.3 mm occupied board space. 3. Low profile Height 1.2 4. Lightweight 1.6 1.2 mm protrusion above the board. 0.016 g. total weight (without vacuum cap). 5. Miniaturization of Equipment Holes The outside diameter of the tip of the plug connectors is a narrow 2.8 mm which permits a great reduction in the size of the equipment holes. 6. Durability 25% lower profile Weight 0.025g 0.016g 50 mating/unmating cycles, with corresponding plug. 7. Performs over a wide frequency range 36% lighter weight Applicable frequencies range over a wide band, from DC to 11 GHz. 8. Board placement with automatic equipment Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch. SMA conversion adapters 9. RoHS compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. Applications Portable terminals, ETC, notebook computers (Bluetooth), wireless LAN, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance. 2008.5 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesSubminiature have been discontinued, or will beCoaxial discontinued soon. Please products onGHz the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-166 Switch 1.2 check mmthe High, DCstatus to 11 Product Specifications Not mated with the plug Open Mated with (MS-166-HRMJ-1) Operating temperature range -40c to +85c Rated power 2W Frequency range DC to 11GHz V.S.W.R. DC to 8GHz 1.2 max. (DC to 2.5GHz) 1.3 max. (2.5GHz to 6GHz) 1.5 max. (6GHz to 11GHz) 0.15 dB max. (DC to 2.5GHz) Insertion loss 0.20 dB max. (2.5GHz to 6GHz) 0.40 dB max. (6GHz to 11GHz) Isolation loss -------------- Item 1.4 max. (DC to 3GHz) 1.8 max. (3GHz to 8GHz) 0.5 dB max. (DC to 3GHz) 0.7 dB max. (3GHz to 8GHz) 20 dB min. (DC to 3GHz) 15 dB min. (3GHz to 6GHz) 12 dB min. (6GHz to 11GHz) Specification Conditions 1. Contact resistance 100 mo max. 100 mA 2. Insulation resistance 1000 Mo min. 100 V DC 3. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 4. Vibration No electrical discontinuity of 1 s or longer 5. Thermal shock No electrical discontinuity of 1 s or longer Frequency: 10 to 55 Hz, single amplitude of 1.5 mm, 2 hours in each of the 3 axis. Acceleration of 490 m/s2, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature: -55c / +15c to +35c / +85c / +15c to +35c 6. Temperature cycle Contact resistance: 100 mo max. Insulation resistance: 10 Mo min. 7. Hight temperature exposure Contact resistance: 100 mo max. 30 / Time: 2 to 3 / 30 / 2 to 3 (Minutes) 100 cycles 96 hours at 85c Insulation resistance: 10 Mo min. 8. Low temperature exposure Contact resistance: 100 mo max. 96 hours at -55c Insulation resistance: 10 Mo min. Contact resistance: 100 mo max. 9. Humidity 96 hours at 402c, and humidity of 90 to 95% Insulation resistance: 10 Mo min. 10. Durability (mating/un-mating, with Contact resistance: 100 mo max. 50 cycles corresponding plug) Materials 2 Part Material Finish Remarks Shell Phosphor bronze Gold plated ------------ Insulator A LCP ------------ UL94V-0 Insulator B Polyamide Common terminal Beryllium copper Partially gold plated ------------ UL94HB Antenna terminal Phosphor bronze Partially gold plated ------------ The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products statusMS-166 on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. SeriesSubminiature Coaxial Switch 1.2 mm High, DC sales to 11 GHz BHigh Frequency Characteristics (Typical) NORMALLY CLOSED(N.C) ~ (Not mated with the plug) 2 0.0 0.2 Insertion Loss 1.8 0.4 1.7 0.6 1.6 0.8 1.5 1.0 1.4 1.2 1.3 1.4 1.2 Insertion loss [dB] V.S.W.R. 1.9 1.6 V.S.W.R. 1.1 1.8 1 2.0 0 1 2 3 4 5 6 7 8 9 10 11 [GHz] OPEN(N.O) ~ (Mated with the plug) 0.0 2 0.2 1.9 Insertion Loss 0.4 1.7 0.6 1.6 0.8 1.5 1.0 1.4 1.2 1.3 1.4 V.S.W.R. 1.2 1.6 1.8 1.1 1 Insertion loss [dB] V.S.W.R. 1.8 0 1 2 3 4 5 6 7 8 2.0 [GHz] 0 5 10 Isolation [dB] 15 Isolation 20 25 30 35 40 45 50 0 1 2 3 4 5 6 7 8 [GHz] 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesSubminiature have been discontinued, or will beCoaxial discontinued soon. Please products onGHz the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-166 Switch 1.2 check mmthe High, DCstatus to 11 Receptacle Part Number CL No. Packaging MS-166 358-0229-3 MS-166 (01) 358-0229-3-01 10,000 pieces/reel 2,000 pieces/reel BCircuit diagram Not mated with the plug (N.C) G Mated with the plug (N.O) G G A 2.3 A B C B C G G G G MS-166 Plug MS-166 MS-166 Plug 0.5 0.4 0.4 2.3 0.35 C terminal A terminal 1.2 0.45 O1.64 BRecommended PCB mounting patternand metal mask dimensions PCB mounting pattern Metal mask dimensions 0.1 to 0.12mm thick (3.45) 0.3 0.65 (3.35) 2.65 0.4 1.95 0.6 0.5 0.6 0.5 2.45 1.45 2.3 2.05 2.55 1.1 0.5 C terminal A terminal C terminal area show the conductive pattern prohibited area. 4 G 0.5 0.95 A terminal MS-166 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products statusMS-166 on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. SeriesSubminiature Coaxial Switch 1.2 mm High, DC sales to 11 GHz BPrecautions 1. Do not use the washing process. 2. This product is intended to be used for circuit inspection only. Consult us if any other application is considered. 3. Plugs can be roughly classified to two types. - For mass production line automatic check (Press down type) - For manual check (With retentive lock) : Unable to be used at production line. 4. Do not use hand soldering for mounting of MS-166. Doing so could result in solder and flux wicking to the contact areas. 5. When using a heat gun, hot plate, or similar methods, limit the temperature to 260c applied for 10 seconds max. 6. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing conductive traces in this area may affect performance and will void product warranties. When the bottom surface of the product (i.e., the shaded area of the specified land dimensions diagram on the previous page) has been processed with a susbtrate copper trace and resist processing, Hirose Electric will not be able to warrant the product. 7. Please refrain from using the product in environments specifically affected by excessive vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor equipment. It might cause degradation or destruction of the product. Even if it endures during a short time, long time quarification is not quaranteed. 8. Exercise caution as not to allow any debris to enter the board mounted MS-166 when cutting PCB. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesSubminiature have been discontinued, or will beCoaxial discontinued soon. Please products onGHz the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-166 Switch 1.2 check mmthe High, DCstatus to 11 BRecommended Temperature profile Typical Lead-free Solder Paste 10 sec. max Temperature (c) 260 230 200 180 q Maximum temperature : 260c w Peak temperature time : 10 sec. max. e 230c min. : 40 sec. max. r 180c to 200c : 90 to 120 sec. max. Metal mask thickness: 0.1 to 0.12mm Reflow cycles: 2 cycles 150 100 50 Time (sec.) 90~120 sec. 40 sec. max BPackaging Specifications (1.95) 1.75 2 4 12 5.5 A terminal O1.5 4 C terminal Unreeling direction Reel dimensions Unreeling direction 12.4 O50 R 3 O1 6 Part Number Reel diameter Packaging MS-166 180 mm 2,000 pieces/reel MS-166 (01) 380 mm 10,000 pieces/reel The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products statusMS-166 on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. SeriesSubminiature Coaxial Switch 1.2 mm High, DC sales to 11 GHz SMA Conversion Adapters Press down, with flange (27.15) 18.65 8.5 17.65 1 8 2-R10 O8.6 14 O5.4 O2.8 6.75 6.62 2- O2 1/4-36UNS-2A .6 Part Number CL No. Durability MS-166-HRMJ-1 358-0239-7 10,000 Times * Mates perpendicularly with the MS-166 and should be used with a load of 5.5 to 10 N applied. * The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle. (34.15) 12 7.86 2 26.29 6.75 6.62 10.42 2-R1 Floating 2.5 O2.8 20 O10.3 O5.4 6.3 6 . O2 2-R6 2- .4 1/4-36UNS-2A Part Number CL No. Durability MS-166-HRMJ-F1 358-0230-2 10,000 Times * Mates perpendicularly with the MS-166 and should be used in specified the spring stroke range of this product. * The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle. Simplified lock, straight 1.3 O6.8 O8 O3.1 O0.3 O5.5 6 (26.81) (25.51) (0.71) 8.5 4 6.3 1/4-36UNS-2A Part Number CL No. Durability MS-166-HRMJ-H1 358-0241-9 500 Times * Equipped with an easy lock mechanism that can maintain mating with the MS-166, but should be used while maintaining a condition of mating perpendicularity. * The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle. 7