MAMXSS0010 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V3 Functional Diagram Features Low Conversion Loss Input Power @ 1 dB Compression: +21 dBm Typical Two-Tone IM Ratio: > 50 dBc LO Drive Level: +11 to +23 dBm DC - 200 MHz IF Bandwidth Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MD54-0003 C L R 8 7 6 5 1 2 3 4 Description M/A-COM's MAMXSS0010 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free surface mount plastic SOIC-8 package. The MAMXSS0010 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/down conversion, modulation, demodulation in systems such as base station receivers and transmitters for DCS1800, PCS and PHS applications. The MAMXSS0010 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +11 dBm to +23 dBm. No DC bias is required. External matching network on LO Port: R = 330 ohms, L = 3 nH, C = 3.3 pF Pin Configuration Pin No. Function Pin No. Function 1 Ground 5 Ground 2 RF Port 6 LO Port 3 Ground 7 IF Port 4 Ground 8 Ground M/A-COM's MAMXSS0010 is fabricated using a mature 1-micron GaAs process. The process features full IC passivation for increased performance and reliability. Ordering Information Part Number Package MAMXSS0010 Bulk Packaging MAMXSS0010TR 1000 piece reel MAMXSS0010SMB Designer's Kit 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAMXSS0010 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V3 Electrical Specifications: Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25C Parameter Test Conditions Units Min Typ Max Conversion Loss -- dB -- 8.5 9.5 Isolation LO to RF LO to IF RF to IF dB dB dB -- -- -- 27 12 10 -- -- -- VSWR LO Port RF Port IF Port Ratio Ratio Ratio -- -- -- 2.5:1 2.0:1 2.0:1 -- -- -- Input 1 dB Compression RF Freq. = 1800 MHz, LO = +13 dBm dBm -- +21 -- Two-Tone IM Ratio2 Two tones at -10 dBm each, Tone spacing 100 kHz, IF = 140 MHz dBc 50 65 -- 2. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x P IN ) Absolute Maximum Ratings 3,4 Absolute Maximum 5 +22 dBm 5 LO Drive Power +23 dBm Operating Temperature -40C to +85C Storage Temperature -65C to +150C RF Input Power 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. Total combined power for RF and LO ports should not exceed +23 dBm. Harmonic of LO Parameter Spurious Table 4x 17 6.9 48.2 47.2 62.3 61.1 71.7 61.7 73.4 63.4 3x 10.3 0.3 28.9 28.9 63.0 61.3 71.3 63.5 70.6 61.6 2x -8.8 -18.8 -25.7 25.9 52.1 61.3 71.5 61.5 72.1 62.1 1x -13.1 -23.1 0 0 67.5 61.1 71.3 61.9 72.6 62.6 0x X X 2.1 2.1 56.8 61.7 72.3 62.3 69.3 59.8 0x 1x 2x 3x 4x Harmonic of RF Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated by the number of dB below the conversion loss. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of -5 dBm, the lower number is for -15 dBm. |mFRF - nFLO |, RF = -5 dBm |mFRF - nFLO |, RF = -15 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAMXSS0010 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V3 Typical Performance Curves Conversion Loss Isolation 11 30 25 10 20 9 15 10 8 5 7 1700 1750 1800 1850 1900 1950 0 1700 2000 RF TO IF LO TO IF LO TO RF 1750 RF Frequency (MHz) 1800 1850 1900 1950 2000 RF Frequency (MHz) Input P1dB RF, LO and IF VSWR IF Frequency (MHz) 25.0 0 50 100 150 200 250 300 1850 1900 1950 2000 5 22.5 LO RF IF 4 3 20.0 2 17.5 1 15.0 1700 1750 1800 1850 1900 RF Frequency (MHz) 1950 2000 0 1700 Lead-Free SOIC-8 1750 1800 RF Frequency (MHz) Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAMXSS0010 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support