VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 1Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Conformal, Single In-Line Thin Film Resistor,
Through Hole Network (Standard)
Vishay Dale Thin Film resistor networks are designed to be
used in analog circuits in conjunction with operational
amplifiers. Engineers can use these circuits to achieve an
infinite number of very low noise and high stability circuits
for industrial, medical and scientific instrumentation.
This family of standard resistor networks will continually be
expanded with new and innovative designs, and Vishay Dale
Thin Film stocks most designs in house for off-the-shelf
convenience. However, if you can not find the standard
network you need, call applications engineering at
(716) 283-4025, as we may be able to meet your
requirements with a semicustom “match” for a quick
delivery.
For standard networks with tighter specifications, or for
custom networks, contact Applications Engineering at the
above number. For a quick review of typical applications,
request Vishay’s guide to understanding and using thin film
precision networks.
FEATURES
• Off-the-shelf delivery
• Wide variety of standards
• Small size (SIP)
• Standard designs - no NRE
• Low capacitance < 0.1 pF/PIN
• Flame resistant (UL 94 V-0 rating)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
TYPICAL PERFORMANCE
Complete electrical specifications at the end of schematics.
SCHEMATIC TWO EQUAL RESISTORS
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SBX
RATIO DIVIDER 10:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF280SBX
Actual Size
ABSOLUTE TRACKING
TCR 10 2
ABSOLUTE RATIO
TOL. 0.1 0.02
Available
Available
R1 = R2
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 218 where seated height = 0.342" (8.69 mm) max.
1
R1
Actual Size
2
R2
3
ORDERING INFORMATION (R1 =)
1K: VTF209BX 50K: VTF214BX
2K: VTF210BX 100K: VTF215BX
5K: VTF211BX 200K: VTF216BX
10K: VTF212BX 500K: VTF217BX
20K: VTF213BX 1M: VTF218BX
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 281 where seated height = 0.362" (9.19 mm) max.
R1 + R2 = 10K, 100K, 1M
R1 + R2 = 10
R2
1
R1
Actual Size
23
R2
ORDERING INFORMATION (R1 + R2 =)
9K + 1K = 10K: VTF280BX
90K + 10K = 100K: VTF193BX
900K + 100K = 1M: VTF281BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 2Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIVIDER NETWORK 10:1
TWO EQUAL RESISTORS - ISOLATED
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SBX
RATIO DIVIDER 10:1 AND 100:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF330SBX
FOUR EQUAL RESISTORS ONE COMMON
Lead (Pb)-free option add “S” after part number,
e.g: VTF366SBX
DIVIDER NETWORK 2:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1087SBX
Actual Size
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 283 where seated height = 0.362" (9.19 mm) max.
123
R1R2
R1 = 100K, 1M
R1 = 10
R2
ORDERING INFORMATION (R1 =)
100K: VTF282BX
1M: VTF283BX
L = Total length = 0.420" (10.67 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R1 = R2
1
R1
Actual Size
2
R2
34
ORDERING INFORMATION (R1 =)
1K: VTF365BX 50K: VTF1000BX
2K: VTF997BX 100K: VTF348BX
5K: VTF998BX 200K: VTF1105BX
10K: VTF363BX 500K: VTF1106BX
20K: VTF1104BX 1M: VTF1103BX
25K: VTF999BX
1
R1
Actual Size
23
L = Total length = 0.420" (10.67 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R2R3
90K 9K 1K
4
R1 + R2 + R3 = 100K
R1 + R2 + R3
= 100
R3
R1 + R2 + R3
= 10
R2 + R3
ORDERING INFORMATION (R1 + R2 + R3 =)
100K: VTF330BX
1
R1R2R3R4
2345
R1 = R2 = R3= R4 = 10K, 100K
Actual Size
L = Total length = 0.520" (13.21 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
ORDERING INFORMATION (R1 =)
10K: VTF366BX
100K: VTF367BX
R1
Actual Size
R2
10K 10K
12345
R3
5K
L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) max.
R1 = 10K
R2 = 1
R1
R3 =R1 x R2
R1 + R2
ORDERING INFORMATION
VTF1087BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 3Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIVIDER NETWORK 2:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1088SBX
DIVIDER NETWORK 5:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1089SBX
DIVIDER NETWORK 10:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1090SBX
DIVIDER NETWORK 1:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF225SBX
DIVIDER NETWORK 2:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1009SBX
Actual Size
R1 = 10K
R2 = 2
R1
R1
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
12345
R2R3
10K 20K 6.667K
R3 = R1 x R2
R1 + R2
ORDERING INFORMATION
VTF1088BX
Actual Size
R1 = 10K
R2 = 5
R1
R1
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
12345
R2R3
10K 50K 8.333K
R3 = R1 x R2
R1 + R2
ORDERING INFORMATION
VTF1089BX
ORDERING INFORMATION
VTF1090BX
1
Actual Size
23456
R1 = 5K, 10K, 100K, 1M
R1 = R2
R1R2R1
R2
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 287 seated height = 0.362" (9.19 mm) max.
ORDERING INFORMATION (R1 =)
5K: VTF225BX
10K: VTF286BX
100K: VTF219BX
1M: VTF287BX
1Actual Size
23456
R1 = 10K, 100K
R1 = 2
R2
R1R2R1
R2
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
ORDERING INFORMATION (R1 =)
10K: VTF1009BX
100K: VTF1010BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 4Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIVIDER NETWORK 5:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1007SBX
DIVIDER NETWORK 10:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF220SBX
DIVIDER NETWORK 10:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF328SBX
DIVIDER NETWORK 20:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1073SBX
DIVIDER NETWORK 100:1
Lead (Pb)-free option add “S” after part number,
e.g: VTF1109SBX
1
Actual Size
23456
R1R2R1
R2
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R1 = 10K, 100K
R1 = 5
R2
ORDERING INFORMATION (R1 =)
10K: VTF1007BX
100K: VTF1008BX
1Actual Size
23456
R1R2R2
R1
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R1 = 10K
R2 = 10
R1
ORDERING INFORMATION (R1 =)
10K: VTF220BX
1Actual Size
23456
R1 = 10K, 100K, 1M
R1 = 10
R2
R1R2R1
R2
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 285 seated height = 0.320" (8.13 mm) max.
ORDERING INFORMATION (R1 =)
10K: VTF328BX
100K: VTF284BX
1M: VTF285BX
1Actual Size
23456
R1 = 10K, 50K, 200K, 1M
R1 = 20
R2
R1R2R1
R2
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
ORDERING INFORMATION (R1 =)
10K: VTF1073BX
50K: VTF1074BX
200K: VTF1107BX
1M: VTF1108BX
1Actual Size
23456
R1 = 1M
R1 = 100
R2
R1R2R1
R2ORDERING INFORMATION (R1 =)
1M: VTF1109BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 5Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SIX RESISTOR NETWORK
(Designed for unity gain/high common mode voltage
rejection differential amplifier)
Lead (Pb)-free option add “S” after part number,
e.g: VTF442SBX
FOUR EQUAL RESISTORS ISOLATED
Lead (Pb)-free option add “S” after part number,
e.g: VTF329SBX
FOUR EQUAL RESISTORS ISOLATED
Lead (Pb)-free option add “S” after part number,
e.g: VTF1005SBX
Common mode
Division ratio 250, 100, 50
R1 = R3 = 1M
R2 = 4K, 10K, 20K
R4 = 3.984K, 9.901K, 19.608K
R5 = 900K, 950K, 975K
R6 = 100K, 50K, 25K
L = Total length = 0.720" (18.29 mm) max.
H = Seated height = 0.360" (9.14 mm) max.
Maximum voltage to pins 3 and 7 is 300 V
1
R5
Actual Size
234567
R6R1R2R4R3
1M 1M
ORDERING INFORMATION (R1/R2 =)
Devision Ratio = 250: VTF442BX
100: VTF443BX
50: VTF444BX
1
R1
Actual Size
23 45 67 8
R1R1R1
R1 = 1K, 10K, 25K, 50K, 100K
L = Total length = 0.820" (20.83 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
ORDERING INFORMATION (R1 =)
1K: VTF329BX
2K: VTF1001BX
5K: VTF1002BX
10K: VTF158BX
25K: VTF1003BX
50K: VTF1004BX
100K: VTF288BX
Absolute tolerance = 0.1 %
Ratio tolerance = 0.1 %
L = Total length = 0.820" (20.83 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R1 = 1K, 10K, 100K
1
R1
Actual Size
23 45 67 8
R1R1R1
ORDERING INFORMATION (R1 =)
1K: VTF1005BX
10K: VTF1006BX
100K: VTF1137BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 6Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EIGHT EQUAL RESISTORS ONE COMMON
Lead (Pb)-free option add “S” after part number,
e.g: VTF368SBX
EIGHT RESISTOR NETWORK
(Designed for instrument amplifier with shield driver)
Lead (Pb)-free option add “S” after part number,
e.g: VTF272SBX
EIGHT BIT R/2R LADDER NETWORK
Lead (Pb)-free option add “S” after part number,
e.g: VTF1072SBX
RESISTANCE DOUBLER
Lead (Pb)-free option add “S” after part number,
e.g: VTF1011SBX
Absolute tolerance = ± 0.1 %
Ratio tolerance = ± 0.1 %
TCR tracking = ± 3 ppm/°C
L = Total length = 1.02" (25.91 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
L = Total length = 0.920" (23.37 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K
1
R1
Actual Size
R2R3R4R5R6R7R8
23456789
ORDERING INFORMATION (R1 =)
10K: VTF368BX
100K: VTF369BX
L = Total length = 0.920" (23.37 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
1
Actual Size
23456789
Ref.
1K9K1K10K 1K 9K 1K 10K
ORDERING INFORMATION
VTF272BX
123
R = 10K, 1K
Actual Size
45678910
R
L = Total length = 1.020" (25.91 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
RRRRRR
2R 2R 2R 2R 2R 2R 2R2R 2R
ORDERING INFORMATION (R =)
(± 1/2 LSB)
10K: VTF1072BX
100K: VTF267BX
123
R1 = 1K
Actual Size
R2
R1R3R4R5R6R7R8R9
45678910
2K1K 4K 8K 16K 32K 64K 128K 256K
ORDERING INFORMATION
VTF1011BX
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 7Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) TCR over -55 °C to +125 °C ± 20 ppm/°C absolute, ± 3 ppm/°C tracking
Note
• “L” and “H” (length and height) dimensions for each model are found alongside the schematic drawing
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Pin/Lead Number 3 to 10 -
Resistance Range 100 to 2 M total -
TCR: Absolute ± 10 ppm/°C (1) 0 °C to +70 °C
TCR: Tracking ± 2 ppm/°C (1) 0 °C to +70 °C
Tolerance: Absolute ± 0.1 % +25 °C
Tolerance: Ratio ± 0.02 % +25 °C
Power Rating: Resistor 100 mW -
Power Rating: Package 500 mW -
Stability: Absolute R ± 0.05 % 2000 h at +70 °C
Stability: Ratio R ± 0.015 % 2000 h at +70 °C
Voltage Coefficient ± 0.01 ppm/V -
Working Voltage 100 V -
Operating Temperature Range 0 °C to +70 °C -
Storage Temperature Range -55 °C to +125 °C -
Noise < - 35 dB -
Thermal EMF < 0.1 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at +25 °C
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION INCHES MILLIMETERS
A 0.125 min. 3.17
B 0.010 min. 0.25
C 0.100 2.54 typ.
D 0.020 typ. 0.48 ± 0.15
E 0.100 max. 2.54
F 0.010 typ. 0.25
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome
Substrate Material Alumina
Body Epoxy coated
Terminals Copper alloy
Tin/Lead Option Sn60 - Sn63
Lead (Pb)-free Option Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish Hot solder dip
Part Number Date Code
Pin 1
Vishay
Logo
B
CD
A
H
LF
E
VTF (Standard)
www.vishay.com Vishay Dale Thin Film
Revision: 02-Oct-15 8Document Number: 60038
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF211BX
GLOBAL MODEL PART NUMBER
(3 or 4 digits)
LEAD (Pb)-FREE
(0 or 1 digits) PACKAGING
VTF xxx or xxxx
Example: 214
1004
S = Lead (Pb)-free (e1)
None = Tin lead
BX = Conductive foam box
Historical Part Number example: VTF 211 (for reference purposes only)
VTF 211
MODEL PART NUMBER
VTF100 4SBX
VTF 2 11 BX
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.