SPEC NO: DSAB2967 REV NO: V.3 DATE:DEC/07/2002 PAGE: 1 OF 5
APPROVED: J.Lu CHECKED:Joe Lee DRAWN:Y.H.LI
APDA03-41MBWA BLUE
Package Dimensions& Internal Circuit Diagram
SURFACE MOUNT DISPLAY
Features
!0.3INCH DIGIT HEIGHT.
!LOW CURRENT OPERATION.
!EXCELLENT CHARACTER APPEARANCE.
!I.C. COMPATIBLE
!MECHANICALLY RUGGED.
!GRAY FACE,WHITE SEGMENT.
!PACKAGE:600PCS/REEL.
Description
The Blue source color devices are made with GaN on
SiC Light Emitting Diode.
Static electricity and surge damage the LEDS. It is
recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change whitout notice.
D
SPEC NO: DSAB2967 REV NO: V.3 DATE:DEC/07/2002 PAGE: 2 OF 5
APPROVED: J.Lu CHECKED:Joe Lee DRAWN:Y.H.LI
Electrical / Optical Characteristics at TA=25°°
°°
°C
Absolute Maximum Ratings at TA=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
retemaraPretemaraP retemaraP retemaraPretemaraP eulBeulB eulB eulBeulBstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 051Am
egatloVesreveR 5V
erutarepmeTgnitarepO 04- °08+oTC °C
erutarepmeTegarotS 04- °58+oTC °C
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL )dcu(vI)dcu(vI )dcu(vI )dcu(vI)dcu(vI Am01@ noitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT
AWBM14-30ADPA)NaG(EULBDESUFFIDETIHW00210005 dnaH.tR,edonAnommoC lamiceD
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePeulB034mnI
F
Am02=
λDhtgnelevaWetanimoDeulB664mnI
F
Am02=
λ∆ 2/1 htdiw-flaHeniLlartcepSeulB06mnI
F
Am02=
CecnaticapaCeulB001FpV
F
zHM1=f;V0=
V
F
egatloVdrawroFeulB8.35.4V I
F
Am02=
I
R
tnerruCesreveReulB01AuV
R
V5=
SPEC NO: DSAB2967 REV NO: V.3 DATE:DEC/07/2002 PAGE: 3 OF 5
APPROVED: J.Lu CHECKED:Joe Lee DRAWN:Y.H.LI
Blue APDA03-41MBWA
SPEC NO: DSAB2967 REV NO: V.3 DATE:DEC/07/2002 PAGE: 4 OF 5
APPROVED: J.Lu CHECKED:Joe Lee DRAWN:Y.H.LI
Recommended Soldering Pattern
(Units : mm)
APDA03-41MBWA
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
SPEC NO: DSAB2967 REV NO: V.3 DATE:DEC/07/2002 PAGE: 5 OF 5
APPROVED: J.Lu CHECKED:Joe Lee DRAWN:Y.H.LI
Tape Specifications
(Units : mm)
