TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
NPN SILICON TRANSISTOR
Qualified per MIL-PRF-19500/317
T4-LDS-0057 Rev. 3 (110213) Page 1 of 8
DEVICES LEVELS
2N2369A 2N2369AUB 2N4449 JAN
2N2369AU 2N2369AUBC * JANTX
2N2369AUA JANTXV
JANS
* Available to JANS quality level only.
ABSOLUTE MAXIMUM RATI NG S (TC = +25°C unless otherwise noted)
Parameters / Test Conditions Symbol Value Unit
Collector-Emitter Voltage VCEO 15 Vdc
Emitter-Base Voltage VEBO 4.5 Vdc
Collector-Base Voltage VCBO 40 Vdc
Collector-Emitter Voltage ICES 40 Vdc
Total Power Dissipation @
TA = +25°C
2N2369A; 2N4449
UA, UB, UBC
U
PT
0.36 (1)
0.36 (1, 3)
0.50 (2)
W
Operating & Storage Junction Temperature Range Top, Tstg -65 to +200 °C
THERMAL CHARACTERISTICS
Parameters / Test Conditions Symbol Value Unit
Thermal Resistance, Ambient-to-Case
RJA
°C/W
2N2369A; 2N4449
UA, UB, UBC
U
400
486 (3)
350
Note:
1. Derate linearly 2.06 mW°/C above TA = +25°C.
2. Derate linearly 3.44 mW°/C above TA = +54.5°C.
3. Mounted on FR-4 PCB (1Oz. Cu) with contacts 20 mils larger than package pads.
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)
Parameters / Test Conditions Symbol Min. Max. Unit
OFF CHARACTERTICS
Collector-Emitter Breakdown Voltage
IC = 10mAdc V(BR)CEO 15 Vdc
Collector-Base Cutoff Current
VCE = 20Vdc ICES 0.4 Adc
TO-18 (TO-206AA)
2N2369A
TO-46 (TO-206AB )
2N4449
SURFACE MOUNT
UA
SURFACE MOUNT
UB & UBC
(UBC = Ceramic Lid Version)
SURFACE MOUNT
U (Dual Transistor)
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 2 of 8
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)
Parameters / Test Conditions Symbol Min. Max. Unit
OFF CHARACTERISTICS
Emitter-Base Cutoff Current
IEBO
Adc
VEB = 4.5Vdc
VEB = 4.0Vdc
10
0.25
Collector- Base Cutoff Current
ICBO
Adc
VCB = 40Vdc
VCB = 32Vdc
10
0.2
ON CHARACTERISTICS (1)
Forward-Current Transfer Ratio
hFE
IC = 10mAdc, VCE = 0.35Vdc
IC = 30mAdc, VCE = 0.4Vdc
IC = 10mAdc, VCE = 1.0Vdc
IC = 100mAdc, VCE = 1.0Vdc
40
30
40
20
120
120
120
120
Collector-Emitter Saturation Voltage
VCE(sat)
Vdc
IC = 10mAdc, IB = 1.0mAdc
IC = 30mAdc, IB = 3.0mAdc
IC = 100mAdc, IB = 10mAdc
0.20
0.25
0.45
Base-Emitter Saturation Voltage
VBE(sat)
Vdc
IC = 10mAdc, IB = 1.0mAdc
IC = 30mAdc, IB = 3.0mAdc
IC = 100mAdc, IB = 10mAdc
0.70
0.80
0.85
0.90
1.20
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Forward Current Transfer Ratio
IC = 10mAdc, VCE = 10Vdc, f = 100MHz |hfe| 5.0 10
Output Capacitance
Cobo 4.0 pF
VCB = 5.0Vdc, IE = 0, 100kHz f 1.0MHz
Input Capacitance
Cibo 5.0 pF
VEB = 0.5Vdc, IC = 0, 100kHz f 1.0MHz
SWITCHING CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Turn-On Time
IC = 10mAdc; IB1 = 3.0mAdc, IB2 = -1.5mAdc t
on 12
s
Turn-Off Time
IC = 10mAdc; IB1 = 3.0mAdc, IB2 = -1.5mAdc
toff 18
s
Charge Storage Time
IC = 10mAdc; IB1 = 10mAdc, IB2 = 10mAdc
tS 13
s
(1) Pulse Test: Pulse Width = 300s, Duty Cycle 2.0%.
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 3 of 8
PACKAGE DIMENSIONS
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Beyond r (radius) maximum, TH shall be held for a minimum length of .011 (0.28 mm).
4. Dimension TL measured from maximum HD.
5. Body contour optional within zone defined by HD, CD, and Q.
6. Leads at gauge plane .054 +.001 -.000 inch (1.37 +0.03 -0.00 mm) below seating plane shall be within .007 inch (0.18
mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC.
7. Dimension LU applies between L1 and L2. Dimension LD applies between L2 and LL minimum. Diameter is
uncontrolled in L1 and beyond LL minimum.
8. All three leads.
9. The collector shall be internally connected to the case.
10. Dimension r (radius) applies to both inside corners of tab.
11. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
12. Lead 1 = emitter, lead 2 = base, lead 3 = collector.
FIGURE 1. Physical dimensions TO-18 (2N2369A).
Dimensions
Ltr Inches Millimeters Notes
Min Max Min Max
CD .178 .195 4.52 4.95
CH .170 .210 4.32 5.33
HD .209 .230 5.31 5.84
LC .100 TP 2.54 TP 6
LD .016 .021 0.41 0.53 7,8
LL .500 .750 12.70 19.05 7,8,13
LU .016 .019 0.41 0.48 7,8
L1 .050 1.27 7,8
L2 .250 6.35 7,8
P .100 2.54 5
Q .030 0.76 5
TL .028 .048 0.71 1.22 3,4
TW .036 .046 0.91 1.17 3
r .010 0.25 10
α 45° TP 45° TP 6
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 4 of 8
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Symbol TL is measured from HD maximum.
4. Details of outline in this zone are optional.
5. Leads at gauge plane .054 inch (1.37 mm) +.001 inch (0.03 mm) -.000 inch (0.00 mm) below seating plane shall be
within .007 inch (0.18 mm) radius of TP relative to tab. Device may be measured by direct methods or by gauge.
6. Symbol LU applies between L1 and L2. Dimension LD applies between L2 and LL minimum.
7. Lead number three is electrically connected to case.
8. Beyond r maximum, TW shall be held for a minimum length of .011 inch (0.28 mm).
9. Symbol r applied to both inside corners of tab.
10. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
11. Lead 1 is emitter, lead 2 is base, and lead 3 is collector.
FIGURE 2. Physical dimensions - TO-46 (2N4449).
Dimensions
Ltr Inches Millimeters Notes
Min Max Min Max
CD .178 .195 4.52 4.95
CH .065 .085 1.65 2.16
HD .209 .230 5.31 5.84
LC .100 TP 2.54 TP 5
LD .016 .021 0.41 0.53
LL .500 1.750 12.70 44.45 6
LU .016 .019 0.41 0.48 6
L1 .050 1.27 6
L2 .250 6.35 6
Q .040 1.02 3
TL .028 .048 0.71 1.22 8
TW .036 .046 0.91 1.17 4
r .010 0.25 9
α 45° TP 45° TP
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 5 of 8
FIGURE 3. Physical dimensions - surface mount (UB version, 2N2369AUB).
NOTES: Dimensions
1. Dimensions are in inches. Ltr Inches Millimeters Notes
2. Millimeters are given for general information only. Min Max Min Max
3. Hatched areas on package denote metallized areas. BH .046 .056 1.17 1.42
4. Lid material: Kovar. BL .115 .128 2.92 3.25
5. Pad 1 = Base, Pad 2 = Emitter, Pad 3 = Collector, BW .085 .108 2.16 2.74
Pad 4 = Shielding connected to the lid. CL .128 3.25
6. In accordance with ASME Y14.5M, diameters are equivalent to CW .108 2.74
x symbology. LL1 .022 .038 0.56 0.96
LL2
.017 .035 0.43 0.89
LS1
.036 .040 0.91 1.02
LS2
.071 .079 1.81 2.01
LW
.016 .024 0.41 0.61
r
.008 .203
r1
.012 .305
r2
.022 .559
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 6 of 8
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Hatched areas on package denote metallized areas
4. Pad 1 = Base, Pad 2 = Emitter, Pad 3 = Collector, Pad 4 = connected to the lid braze ring.
5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 4. Physical dimensions, surface mount (UBC version, ceramic lid).
Symbol Dimensions Note Symbol Dimensions Note
Inches Millimeters Inches Millimeters
Min Max Min Max
Min Max Min Max
BH .046 .071 1.17 1.80
LS1 .036 .040 0.91 1.02
BL .115 .128 2.92 3.25
LS2 .071 .079 1.81 2.01
BW .085 .108 2.16 2.74
LW .016 .024 0.41 0.61
CL .128 3.25
r .008 .203
CW .108 2.74
r1 .012 .305
LL1 .022 .038 0.56 0.96
r2 .022 .559
LL2 .017 .035 0.43 0.89
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 7 of 8
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Dimension CH controls the overall package thickness. When a window lid is used, dimension CH must increase by a
minimum of .010 inch (0.254 mm) and a maximum of .040 inch (1.020 mm).
4. The corner shape (square, notch, radius) may vary at the manufacturer's option, from that shown on the drawing.
5. Dimensions LW2 minimum and L3 minimum and the appropriate castellation length define an unobstructed three-
dimensional space traversing all of the ceramic layers in which a castellation was designed. (Castellations are required on
the bottom two layers, optional on the top ceramic layer.) Dimension LW2 maximum and L3 maximum define the
maximum width and depth of the castellation at any point on its surface. Measurement of these dimensions may be made
prior to solder dipping.
6. The co-planarity deviation of all terminal contact points, as defined by the device seating plane, shall not exceed .006 inch
(0.15mm) for solder dipped leadless chip carriers.
7. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 5. Physical dimensions - surface mount (UA version).
Dimensions
Ltr. Inches Millimeters
Min Max Min Max
BL .215 .225 5.46 5.71
BL2 .225 5.71
BW .145 .155 3.68 3.93
BW2 .155 3.93
CH .061 .075 1.55 1.90
L3 .003 .007 0.08 0.18
LH .029 .042 0.74 1.07
LL1 .032 .048 0.81 1.22
LL2 .072 .088 1.83 2.23
LS .045 .055 1.14 1.39
LW .022 .028 0.56 0.71
LW2 .006 .022 0.15 0.56
Pin number. 1 2 3 4
Transistor Collector Emitter Base N/C
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0057 Rev. 3 (110213) Page 8 of 8
NOTES:
1. 1.Dimensions are in inches.
2. Millimeters are given for general information only.
3. Dimension CH controls the overall package thickness. When a window lid is used, dimension CH must increase by a
minimum of .010 inch (0.254 mm) and a maximum of .040 inch (1.020 mm).
4. The corner shape (square, notch, radius) may vary at the manufacturer's option, from that shown on the drawing.
5. Dimensions LW2 minimum and L3 minimum and the appropriate castellation length define an unobstructed three-
dimensional space traversing all of the ceramic layers in which a castellation was designed. (Castellations are required on
the bottom two layers, optional on the top ceramic layer.) Dimension LW2 maximum and L3 maximum define the
maximum width and depth of the castellation at any point on its surface. Measurement of these dimensions may be made
prior to solder dipping.
6. The co-planarity deviation of all terminal contact points, as defined by the device seating plane, shall not exceed .006 inch
(0.15mm) for solder dipped leadless chip carriers.
7. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 6. Physical dimensions - surface mount (dual transistors, U version only, 2N2369AU).
Dimensions
Ltr. Inches Millimeters
Min Max Min Max
BL .240 .250 6.10 6.35
BL2 .250 6.35
BW .165 .175 4.19 4.44
BW2 .175 4.44
CH .066 .080 1.68 2.03
L3 .003 .007 0.08 0.18
LH .026 .039 0.66 0.99
LL1 .060 .070 1.52 1.78
LL2 .082 .098 2.08 2.49
LS1 .095 .105 2.41 2.67
LS2 .045 .055 1.14 1.39
LW .022 .028 0.56 0.71
LW2 .006 .022 0.15 0.56
Pin number 1 2 3 4 5 6
Transistor Collector no. 1 Base no. 1 Base no. 2 Collector no. 2 Emitter no. 2 Emitter no. 1