1 Copyright 2011 Techspray.
For Commercial Use Only
PINE-SHOWER
Surface & E quipment Cleaner
1502
Introduction
Leveraging the cleaning power of pine, Pine-Shower quickly removes flux residues,
grease and other soils, and leaves a non-oily finish. Safe on ESD mats, work benches
and equipment surfaces.
Does not contain butyl cellosolve, which is common in many degreasers and surface
cleaners, and has potential negative health effects. Under California guidelines (CARB),
Pine-Sh o wer has zer o VOC, and has a less than 3% VOC under EP A guidel in es .
Pine-Shower is economical and considered ready-to-use, but can be diluted for light
surface and equipment cleaning. Pine-ShowerTM Cleaner is fully compliant with CARB
(California Air Resource Board) requirements.
Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of
Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiativ e s. It does not
contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of
Very High Concer n) list substa nces, or halides.
Features / Benefit s
Clean flux and oils from equipment & surfaces
Concentrated and dillutable
Non-flammable
Halide-free no ionic contam ination
pH in neutral range non-corrosive
Safe on most plasti cs and pain ted surfaces
Biodegradable
Low VOC, zero GWP
Non-ozone depl et in g
Applications
Removal of heavy greases and oils
Cleaning on and around heavy machinery
Cleaning shelv e s and other su r face s
Dilution Instructi ons
Full strengthCaked-on grease (e.g. compresso rs, eng ine s, etc.) , gril ls*, oil stains*
10 parts water : 1 part Pine-Shower – Greasy tools, floor (e.g. concrete) stains*, vents,
heavily stained (food) appliances*, scuff marks on doors, heavy grease on wheels
30-50 parts water : 1 part Pine-Shower – Chrome fittings, stainless steel, very light general
cleaning
* If on food processing equipment, must be rinsed thoroughly to avoid undesirable residues.
TECH DATA SHEET
2 Copyright 2011 Techspray.
For Commercial Use Only
About TECHSPRAY RENEWTM
TECHSPRAY RENEWTM is a brand that represents High Performance Eco-CleaningTM.
Techspray® has applied our expertise in solvent cleaning to formulate some of the most effective
eco-friendly cleaners on the market. Performance is our top priority, using the best “green”
solutions as they become available. W e all are at the cusp of t he ongoi ng mov ement toward
sustainable products, packaging, and processes. It is Techspray’s intention to stay at the cutting-
edge while keeping our products powerful and cost effective.
Directions
Spray and satur ate the soi led area. Let soak for 30-60 seconds depending on thickness of the
grease.
Using a lint-free wipe (we recommend Techspray 2364-50 or 2365-300 wipes), wipe lightly at
first to allow cleaning agent to break down residues.
Continue to wipe in a circular motion until the grease or oil is fully removed.
For thick greases, reapplication may be needed.
On walking surfaces, mop thoroughly after cleaning.
Material is easily rinsed by wiping with water da mpe ned clo th .
Dispose of soiled wipe as appropriate depending on the type of material removed.
Chemical Properti es
For Chemical Composition, refer to MSDS.
EXPOSURE LIMIT: Limits on components not establ ish ed.
Manufacturer’s recommendation 1000 ppm.
PHYSICAL STATE: Liquid
ODOR: Mild pine scent
APPEARANCE: Light green, soapy liquid
pH: 7 to 8
BOILING POIN T : 212°F (100°C)
FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point
SOLUBILITY IN WATER: Fully miscible
DENSITY: ~1.00 at 25°C
VOC (by wt ): 2% by wt (EPA), 0% (CARB)
3 Copyright 2011 Techspray.
For Commercial Use Only
Performance
Tested according to modified MIL-PRF-29608 4.59 standards:
Soil is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 15-seconds, then a poly-cellulose wipe
is dragged across one time using a weighted dowel to maintain consistent pressure. Percentage refers to the amount
of soil (by weight) removed from stainless steel test coupon.
SAMPL E ID
CONCENTRATION
SOIL
CLEANING
EFFICIENCY
1502 Pine-Shower
100%
Lube/Soil Blend*
85%
1502 Pine-Shower
50%
Lube/Soil Blend*
64%
1502 Pine-Shower
25%
Lube/Soil Blend*
57%
1500 Eco-Shower
100%
Lube/Soil Blend*
93%
1500 Eco-Shower
50%
Lube/Soil Blend*
75%
1500 Eco-Shower
25%
Lube/Soil Blend*
60%
1505 Eco-Shine
100%
Lube/Soil Blend*
65%
Simple Green
100%
Lube/Soil Blend*
75%
Simple Green
50%
Lube/Soil Blend*
50%
Simple Green
25%
Lube/Soil Blend*
38%
409 All-Purpose Cleaner
100%
Lube/Soil Blend*
36%
Windex Original
100%
Lube/Soil Blend*
62%
Hydroforce
100%
Lube/Soil Blend*
90%
Control dry wipe
Lube/Soil Blend*
29%
Control H2O wet wip e
Lube/Soil Blend*
42%
* Composition of lube/ soi l blend: 2 parts Mystik #2, 2 parts Lubriplate #1242, 2 parts Slick 50 #1, 1 part Lubriplate
80W-140, 1 part Silicone TBF9-350, 1 part soil.
Compatibility
ESD Mats & Sur faces
5-day exposure test at room temperature had shown no surface degradation, drying, cracking or increase of
resistivity.
Metals
Test method: 15 minute immersion at room temperature in sealed jar, remove, wipe dry, and make observations.
Observations made immediately after removal and drying, and 1 hour later.
Material
Compatibility
Brass foil
Excellent
Copper foil
Excellent
Nickel 200
Excellent
Aluminum 6061
Excellent
Aluminum 2024
Excellent
Anodized aluminum
Excellent
Stainless Steel 316
Excellent
Stainless Steel 304
Excellent
Mild carbon steel
Excellent
Galvanized Steel
Excellent
Note: Pine-Shower™ is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel,
and other susceptible metals.
4 Copyright 2011 Techspray.
For Commercial Use Only
Plastics
Test method: Tested as bulk unstressed coupons, and the following immersion times for the base chemistry:
1 minute, 5 minutes, and 15 minutes.
Material
Compatibility
Material
Compatibility
ABS
Excellent
PMMA
Good (1)
Nylon
Excellent
POM
Excellent
Lexan
Excellent
PP
Excellent
HDPE
Excellent
PS
Good (1)
LDPE
Excellent
PTFE
Excellent
C. E. Phenolic
Excellent
PVC
Excellent
1 = Slight softening after 15 minutes of exposure.
Envir onmental Poli cy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We
will continue to meet and sustain the regulations of all federal, state and local government
agencies.
Pack aging and Availabil ity
Pine-ShowerTM Cleaner available in the following sizes:
1502-QT 1 quart (0.95L) w/ trigger sprayer
1502-G 1 gallon (3.8L) in plastic jug
1502-5G 5 gallon (19L) in pla sti c tub
Available as special order, call for pricing:
1502-54G 54 gallon (205L) in plastic drum
1502-275G 275 gallon (1,045L)
Resources
Techspray® products are supported by global sales, technical and customer services resources.
For additional technical information on this product or other Techspray® products in the United
States, call the technical sales department at 800-858-4043 , emai l tsale s@te ch spray .c om o r visit
our web site at: www.techspray.com.
North America Europe Count ries Outs ide US
Techspray ITW Contamination Control BV Call to locate a distributor
P.O. Box 949 Saffierlaan 5 in your country.
Amarill o, TX 79105 2132 VZ Hoofddorp
800-858-4043 The Netherlands
email: tsales@t echs pray.c om +31 88 1307 400
email: info@it w-cc.com
Important Notice to Pur chaser/User: The information in this public ation is based on tests that we beli eve are reliable. The
results may vary due to dif ferences in tests type and conditions. We recomm end that each user evaluate the product to
determine its suitabil ity for the i ntended applicat ion. Conditions of use are outside our cont rol and vary widely. Tec hspray’s
only obli gation and your onl y soluti on is replacement of product that is show n to be defective when you recei ve it. I n no
case w ill Techs pray® be liabl e for any special, incidental, or consequential dam ages based on breach of warranty,
negligence or any ot her theory.
Techspray® and Blue S hower® are registered tr ademarks of Techspr ay. Techspray RenewTM, Pine-ShowerTM, and “High
Performance Ec o-CleaningTM” are t rademark s of Techspray.