TECH DATA SHEET PINE-SHOWERTM Surface & Equipment Cleaner 1502 Introduction Leveraging the cleaning power of pine, Pine-Shower quickly removes flux residues, grease and other soils, and leaves a non-oily finish. Safe on ESD mats, work benches and equipment surfaces. Does not contain butyl cellosolve, which is common in many degreasers and surface cleaners, and has potential negative health effects. Under California guidelines (CARB), Pine-Shower has zero VOC, and has a less than 3% VOC under EPA guidelines. Pine-Shower is economical and considered ready-to-use, but can be diluted for light surface and equipment cleaning. Pine-ShowerTM Cleaner is fully compliant with CARB (California Air Resource Board) requirements. Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. It does not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides. Features / Benefits * * * * * * * * * Clean flux and oils from equipment & surfaces Concentrated and dillutable Non-flammable Halide-free - no ionic contamination pH in neutral range - non-corrosive Safe on most plastics and painted surfaces Biodegradable Low VOC, zero GWP Non-ozone depleting Applications * * * Removal of heavy greases and oils Cleaning on and around heavy machinery Cleaning shelves and other surfaces Dilution Instructions * * * Full strength - Caked-on grease (e.g. compressors, engines, etc.), grills*, oil stains* 10 parts water : 1 part Pine-Shower - Greasy tools, floor (e.g. concrete) stains*, vents, heavily stained (food) appliances*, scuff marks on doors, heavy grease on wheels 30-50 parts water : 1 part Pine-Shower - Chrome fittings, stainless steel, very light general cleaning * If on food processing equipment, must be rinsed thoroughly to avoid undesirable residues. 1 Copyright 2011 Techspray. For Commercial Use Only About TECHSPRAY RENEW TM TM TM TECHSPRAY RENEW is a brand that represents High Performance Eco-Cleaning . (R) Techspray has applied our expertise in solvent cleaning to formulate some of the most effective eco-friendly cleaners on the market. Performance is our top priority, using the best "green" solutions as they become available. We all are at the cusp of the ongoing movement toward sustainable products, packaging, and processes. It is Techspray's intention to stay at the cuttingedge while keeping our products powerful and cost effective. Directions * * * * * * * Spray and saturate the soiled area. Let soak for 30-60 seconds depending on thickness of the grease. Using a lint-free wipe (we recommend Techspray 2364-50 or 2365-300 wipes), wipe lightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the grease or oil is fully removed. For thick greases, reapplication may be needed. On walking surfaces, mop thoroughly after cleaning. Material is easily rinsed by wiping with water dampened cloth. Dispose of soiled wipe as appropriate depending on the type of material removed. Chemical Properties For Chemical Composition, refer to MSDS. * * * * * * * * * * 2 EXPOSURE LIMIT: Limits on components not established. Manufacturer's recommendation 1000 ppm. PHYSICAL STATE: Liquid ODOR: Mild pine scent APPEARANCE: Light green, soapy liquid pH: 7 to 8 BOILING POINT : 212F (100C) FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point SOLUBILITY IN WATER: Fully miscible DENSITY: ~1.00 at 25C VOC (by wt): 2% by wt (EPA), 0% (CARB) Copyright 2011 Techspray. For Commercial Use Only Performance Tested according to modified MIL-PRF-29608 4.59 standards: Soil is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 15-seconds, then a poly-cellulose wipe is dragged across one time using a weighted dowel to maintain consistent pressure. Percentage refers to the amount of soil (by weight) removed from stainless steel test coupon. SAMPLE ID 1502 Pine-Shower 1502 Pine-Shower 1502 Pine-Shower 1500 Eco-Shower 1500 Eco-Shower 1500 Eco-Shower 1505 Eco-Shine Simple Green Simple Green Simple Green 409 All-Purpose Cleaner Windex Original Hydroforce Control dry wipe Control H2O wet wipe CONCENTRATION SOIL 100% Lube/Soil Blend* 50% Lube/Soil Blend* 25% Lube/Soil Blend* 100% Lube/Soil Blend* 50% Lube/Soil Blend* 25% Lube/Soil Blend* 100% Lube/Soil Blend* 100% Lube/Soil Blend* 50% Lube/Soil Blend* 25% Lube/Soil Blend* 100% Lube/Soil Blend* 100% Lube/Soil Blend* 100% Lube/Soil Blend* Lube/Soil Blend* Lube/Soil Blend* CLEANING EFFICIENCY 85% 64% 57% 93% 75% 60% 65% 75% 50% 38% 36% 62% 90% 29% 42% * Composition of lube/soil blend: 2 parts Mystik #2, 2 parts Lubriplate #1242, 2 parts Slick 50 #1, 1 part Lubriplate 80W-140, 1 part Silicone TBF9-350, 1 part soil. Compatibility ESD Mats & Surfaces 5-day exposure test at room temperature had shown no surface degradation, drying, cracking or increase of resistivity. Metals Test method: 15 minute immersion at room temperature in sealed jar, remove, wipe dry, and make observations. Observations made immediately after removal and drying, and 1 hour later. Material Brass foil Copper foil Nickel 200 Aluminum 6061 Aluminum 2024 Anodized aluminum Stainless Steel 316 Stainless Steel 304 Mild carbon steel Galvanized Steel Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Note: Pine-ShowerTM is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel, and other susceptible metals. 3 Copyright 2011 Techspray. For Commercial Use Only Plastics Test method: Tested as bulk unstressed coupons, and the following immersion times for the base chemistry: 1 minute, 5 minutes, and 15 minutes. Material ABS Nylon Lexan HDPE LDPE C. E. Phenolic Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Material PMMA POM PP PS PTFE PVC Compatibility Good (1) Excellent Excellent Good (1) Excellent Excellent 1 = Slight softening after 15 minutes of exposure. Environmental Policy (R) Techspray is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies. Packaging and Availability Pine-Shower 1502-QT 1502-G 1502-5G TM Cleaner available in the following sizes: 1 quart (0.95L) w/ trigger sprayer 1 gallon (3.8L) in plastic jug 5 gallon (19L) in plastic tub Available as special order, call for pricing: 1502-54G 54 gallon (205L) in plastic drum 1502-275G 275 gallon (1,045L) Resources Techspray(R) products are supported by global sales, technical and customer services resources. For additional technical information on this product or other Techspray(R) products in the United States, call the technical sales department at 800-858-4043, email tsales@techspray.com or visit our web site at: www.techspray.com. North America Techspray P.O. Box 949 Amarillo, TX 79105 800-858-4043 email: tsales@techspray.com Europe ITW Contamination Control BV Saffierlaan 5 2132 VZ Hoofddorp The Netherlands +31 88 1307 400 email: info@itw-cc.com Countries Outside US Call to locate a distributor in your country. Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray's only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray(R) be liable for any special, incidental, or consequential damages based on breach of warranty, negligence or any other theory. Techspray(R) and Blue Shower(R) are registered trademarks of Techspray. Techspray RenewTM, Pine-ShowerTM, and "High Performance Eco-CleaningTM" are trademarks of Techspray. 4 Copyright 2011 Techspray. For Commercial Use Only