BRANCHE CONNECTEURS AEROMILITAIRES Single Module EN 4165 Arinc 809 - BACC65 - EN4165 The concept Single Module EN4165 The DMC-M is a modular rectangular connector which was designed and developed by Deutsch in the 1980's. It has since set the modular connector standard in the Aerospace & Military industries, and is now standardised by European Specification EN4165. The modularity The DMC-M is designed to address a wide range of requirements due to its wide range of contacts arrangements : from contacts size 22 to size 8, but also coaxial, quadrax or optical contacts. Each mated half of the DMC-M connector can contain both male and female configurations which allow you to mix input and output with signal and power supply. You can easily modify your system by simply removing modules from the shells and replace them with a new layout. This makes the DMC-M perfect for both new designs and retrofit applications. The safety The DMC-M provides a large number of insert layout possibilities. It allows different keying possibilities between plugs and receptacles. DMC-M provides a real EMI protection following most stritgent Aerospace and Military specifications. The reliability To increase the level of reliability of the cabin interconnections, the Single Module DMC-M is compliant with the most demanding avionic specifications, in terms of sealing, vibrations or mechanical endurance in accordance with EN 4165. The weight optimization Weight saving is commonly a high concern, the Single Module DMC-M has been designed in composite with a metallized plating for weight and mass saving. Single Module EN4165 Introduction ARINC 809 - BACC65 - EN4165 The New Standard Connector for Aircraft equipment and cabin systems. Advantages Light weight composite, modularity, color and mechanical coded, push pull coupling are the key features of this connector Electrical characteristics Temperature range Insulation resistance Maximum current : -55 C to + 175 C : 5000 M : Size 22 : 5 A Size 20 : 7,5 A Size 16 : 13 A Size 12 : 23 A Size 8 : 46 A Standard ARINC809, BACC65, EN4165 qualified Markets & Application Cabin and avionic systems Military - Railway Technical characteristics Housing Plating Inserts Vibrations Durability Salt spray Contacts : : : : : : : Composite Nickel Thermoplastic and FSR 20 g 500 mating cycles 500 hours Copper alloy with gold on nickel plating Interfacial sealing : 1,1.10-2 bar EMI shielding performance MHz frequency Attenuation (dB) 100 90 200 88 300 88 400 87 800 1000 85 85 Weight Extender Receptacle Short Receptacle 7 gr 0,015 lbs 6 gr 0,013 lbs Plug Backshell 9 gr 4 - 7gr 0,020 lbs 0,009 - 0,015 lbs Recommended mounting for receptacle screw torque 0,5 0,1 N.m or 4,4 0,9 ln. LbF When using DEUSCH integrated. Nut plate Ref. 787-0016-00 (see page 6) 1 Single Module EN4165 Schematic 1 2 3 4 5 6 7 8 8 1 2* 3 4 5 6 7 8 1 - Nut plate (option). 5 - Color coding plate (option). 2 - Short receptacle. 6 - Screws (ordered separately). 2* - Extender receptacle. 7 - Plug. 3 - Sealing gasket (option). 8 - Backshell. 4 - Panel (up to 2 mm thick). 2 Single Module EN4165 Part numbering system DEUTSCH designation system for the shells Example of order Shell type Plug : 20 Short receptacle : 24 Extender receptacle : 26 DMC-MD 24 D Connector type Coding plate Nut plate Omit : Without K : With Omit : Without T : With - K - S - Shell keying Sealing gasket N-A-B-C-D-E-F-G Omit : Without S : With T Only for receptacles DEUTSCH designation system for the accessories Plating Example of order M : Nickel Omit : Without (just 787-8055-99) 787 - 8055 - 20 Accessories type Connector type 10 : 11 : 12 : 20 : M 21 : 30 : 31 : 99 : Straight chimney Clampshell Straight tie wrap 45 indexable chimney 45 indexable chimney tie wrap 90 indexable chimney 90 indexable chimney tie wrap Universal unshielded accessory Standard designation system for the shells Example of order Sealing gasket Finish Shell type Composite nickel plated : M Monomodule : 1 EN4165 M Number of the basic standard 0 Shell keying U : Without G : With N-A-B-C-D-E-F-G 1 A Shell type Type A Plug : 6 Short receptacle : 0 Extender receptacle : 7 Series 2 D 1 G 1 Coding plate Nut plate 0 : Without 1 : With 0 : Without 1 : With Only for receptacles Standard designation system for the accessories Example of order Finish Chapter EN4165 - 026 Number of the basic standard M : Composite nickel plated M 20 Accessories type 10 : 12 : 20 : 30 : 99 : 3 Straight chimney Straight tie wrap 45 indexable chimney 90 indexable chimney Universal unshielded accessory Part numbering system Single Module EN4165 Backshells Plug DMC-MD 20 N BACC65BUMN EN4165M61AN STRAIGHT CHIMNEY 787-8055-10M EN4165-026M10 DMC-MD 20 A BACC65BUMA EN4165M61AA STRAIGHT CLAMPSHELL 787-8055-11M UNIVERSAL UNSHIELDED ACCESSORY 787-8055-99 EN4165-026-99 DMC-MD 20 B BACC65BUMB EN4165M61AB STRAIGHT CHIMNEY TIE WRAP 787-8055-12M EN4165-026M12 DMC-MD 20 C BACC65BUMC EN4165M61AC 45 INDEXABLE CHIMNEY 787-8055-20M EN4165-026M20 DMC-MD 20 D BACC65BUMD EN4165M61AD 45 INDEXABLE CHIMNEY TIE WRAP 787-8055-21M DMC-MD 20 E EN4165M61AE 90 INDEXABLE CHIMNEY 787-8055-30M EN4165-026M30 DMC-MD 20 F EN4165M61AF 90 INDEXABLE CHIMNEY TIE WRAP 787-8055-31M Note : EN4165 part numbers in progress to be released. DEUTSCH Part numbers (DMC-M / 787) BOEING Part numbers (BACC) STANDARD Part numbers (EN4165) 4 DMC-MD 20 G EN4165M61AG Part numbering system Single Module EN4165 Receptacles Backshells STRAIGHT CHIMNEY 787-8055-10M EN4165-026M10 STRAIGHT CLAMPSHELL 787-8055-11M EXTENDER RECEPTACLE DMC-MD 26 *X BACC65CAM*X EN4165M71A*X UNIVERSAL UNSHIELDED ACCESSORY 787-8055-99 EN4165-026-99 STRAIGHT CHIMNEY TIE WRAP 787-8055-12M EN4165-026M12 * * * * : To be ordered separately (no BACC65 references) *X 45 INDEXABLE CHIMNEY 787-8055-20M EN4165M20 A N A B C D E F G SHORT RECEPTACLE DMC-MD 24 *X BACC65BVM*X EN4165M01A*X 45 INDEXABLE CHIMNEY TIE WRAP 787-8055-21M 90 INDEXABLE CHIMNEY 787-8055-30M EN4165M30 * * * * : To be ordered separately (no BACC65 references) NO ACCESSORRY CAN BE FIXED ON THIS RECEPTACLE 90 INDEXABLE CHIMNEY TIE WRAP 787-8055-31M Note : EN4165 part numbers in progress to be released. DEUTSCH Part numbers (DMC-M / 787) BOEING Part numbers (BACC) STANDARD Part numbers (EN4165) 5 Single Module EN4165 Part numbering system Optionnal parts for receptacle * Locate mating parts * Install rear dowels * Align receptacle with bracket * Fix and snap in position * Install and fix in position PLEASE CONSULT US * Sealing gasket * Keying plate 25,80 (1,016) N : 787-0015-00 A : 787-0015-01 B : 787-0015-02 C : 787-0015-03 D : 787-0015-04 E : 787-0015-05 F : 787-0015-06 G : 787-0015-07 2,50 / (0,098) EN4165-25CN EN4165-25CA EN4165-25CB EN4165-25CC EN4165-25CD EN4165-25CE EN4165-25CF EN4165-25CG * Nut plate 30,80 (1,213) * Panel mounting bracket 30,80 (1,213) 28,80 (1,134) 27,80 (1,094) 28,90 (1,138) 25,80 (1,016) 33,50 (1,319) 3,40 / (0,134) 787-0011-00 EN4165-25E * Assembled Note : These backshells have been developed specially for high speed wire management. Backshells have to be ordered with the DMC-M 99-02-XX inserts. HIGH SPEED CHIMNEY FOR PART NUMBERING, 28,80 (1,134) * Installed 787-0016-00 EN4165-25D 787-0014-00 Protective caps SHIPPING AND SHIPPING AND DUST PLUG CAP DUST RECEPTACLE CAP 104-0236-00 104-0235-00 RECEPTACLE AND EXTENDER EMC CAP WITH LANYARD 787-8011-00 WITHOUT LANYARD 787-8009-00 6 PLUG FLIGHT CAP 787-8010-00 RECEPTACLE AND EXTENDER FLIGHT CAP WITH LANYARD 787-8017-00 WITHOUT LANYARD 787-8016-00 LANYARD 787-8013-00 Single Module EN4165 Insert / Module Pin contacts as per MIL C 39029/58 and EN3155 EN3155 Modules Socket contacts as per MIL C 39029/57 and Details PART NUMBER CROSS 20 contacts size 22 DMC-M 20-22 AN BACI10BC2022PNB EN4165 20-22 A1NA Modules Details PART NUMBER CROSS 20 contacts size 22 DMC-M 20-22 BN BACI10BC2022SNB EN4165 20-22 A1NB 12 contacts size 20 DMC-M 12-20 AN BACI10BC1220PNB EN4165 12-20 A1NA 12 contacts size 20 DMC-M 12-20 BN BACI10BC1220SNB EN4165 12-20 A1NB 8 contacts size 16 DMC-M 08-16 AN BACI10BC0816PNB EN4165 08-16 A1NA 8 contacts size 16 DMC-M 08-16 BN BACI10BC0816SNB EN4165 08-16 A1NB DMC-M 04-12 AN 4 contacts size 12 4 contacts size 12 EN4165 04-12 A1NA DMC-M 01-08 AN 1 contact size 8 EN4165 01-08 A1NA 6 contacts size 16 + 5 contacts size 22 DMC-M 99-01 AN BACI10BC1622PNB EN4165 99-01 A1NA 1 contact size 8 6 contacts size 16 + 5 contacts size 22 DMC-MA 20-22 AN 20 contacts size 22 20 contacts size 22 EN4165 20A22 A1NA 6 contacts size 16 + 5 contacts size 22 DMC-MA 99-01 AN 6 contacts size 16 + 5 contacts size 22 EN4165 99A01A1NA DMC-M 04-12 BN EN4165 04-12 A1NB DMC-M 01-08 BN EN4165 01-08 A1NB DMC-M 99-01 BN BACI10BC1622SNB EN4165 99-01 A1NB DMC-MA 20-22 BN EN4165 20A22A1NB DMC-MA 99-01 BN EN4165 99A01 A1NB 3 contacts size 20 + 8 contacts size 22 DMC-M 99-02 AN * 3 contacts size 20 + 8 contacts size 22 DMC-M 99-02 BN * 8 contacts size 20 + 2 contacts size 16 DMC-M 99-10 AN DMC-M 99-10 BN EN4165 09-10 A1NA 8 contacts size 20 + 2 contacts size 16 EN4165 09-10 A1NB DMC-M 00-00 AN 3x4+4x2 DMC-M 22-07 SN EN4165 00-00 A1NA Shunted contacts size 22 MBBN 3330 Y2A22S Blanking module Note : DMC-MA modules are compatible with Aluminium Cable contacts and with EN3155-70 / 71 size 22. 5x4 DMC-M 22-05 SN Shunted contacts size 22 MBBN 3330 Y2022S Distribution shunt modules use dedicated contacts based on standard M39029. 10 x 2 DMC-M 99-02 are specific modules for highspeed application. Shunted contacts size 22 Aluminium cable technology Distribution shunt modules * To be ordered with high speed chimney (see page 6) DEUTSCH Part numbers (DMC-M / 787) BOEING Part numbers (BACC) STANDARD Part numbers (EN4165) 7 DMC-M 22-10 SN MBBN 3330 Y2B22S Single Module EN4165 Dimensions Receptacles & Plug * Receptacle * Extender receptacle * Plug 29,10 max. (1,146 max.) 29 max. (1,142 max.) 21 max. (0,827 max.) 26 max. (1,024 max.) Backshell / chimney indexation 28,90 max. (1,0138 max.) 29 max. (1,142 max.) 24,60 max. (0,969 max.) 26 max. (1,024 max.) 27,40 max. (1,079 max.) All backshells can be indexed in eight positions on the rear of plug and receptacle shell. This gives maximum flexibility during design and cable installation and reduces the number of variants and components. Mounting panel details * Box mounting receptacle 35,30 max. (1,39 max.) 5,40 max. (0,213 max.) * Straight clampshell 44,50 max. (1,752 max.) * Straight chimney * Extender receptacle 35,30 max. (1,39 max.) 13,50 max. (0,531 max.) * Straight chimney tie wrap 5,40 max. (0,213 max.) 55,30 max. (2,177 max.) 5,40 max. (0,213 max.) 49,10 max. (1,933 max.) * Universal unshielded accessory 51 max. (2,008 max.) 5,40 max. (0,213 max.) * 45 indexable chimney 60,30 max. (2,374 max.) * 45 indexable chimney tie wrap 64,80 max. (2,551 max.) 5,40 max. (0,213 max.) * 90 indexable chimney 60 max. (2,362 max.) 5,40 max. (0,213 max.) 8 Panel mounting cutout details F GENERIC Single Module EN4165 ALL PANELS ARE REPRESENTED FROM VIEW F FREE DIMENSIONS 23,30 0,1 2R 3 0,025 21 0,1 O 3,10 0,1 ORIENTATION 21,00 0,1 4 times 21,00 0,1 20,40 0,1 2R 0,6 0,025 D1 20,40 0,1 2R 3 0,025 20,40 0,1 13,80 0,1 (holes) 1,95 0,03 R 4,55 0,025 D1 Detail 4R 3 0,025 18,30 0,1 20,40 0,1 2R 4,55 0,025 7 0,1 7 0,1 18,30 0,1 7 0,1 7 0,1 Note : Dimensions are in millimeters. Each hole O 3,1 mm must receive a screw (screw type 4-40) Recommanded thickness panel : 0,8 mm mini - 2 mm max. Panel coding keying Coding N Coding A Coding B Coding C Coding D Coding E Coding F Coding G Panel mounting bracket cutout details A-A 0,8 mini. (0,03 mini.) 20 0,1 (0,787 0,004) 0,8 (0,03) A 120 10 0,5 (0,394 0,02) A O 5,1 0,1 (O 0,2 0,004) 15 0,1 (0,59 0,004) 9 O 8,1 mini. (O 0,32 mini.) Overal dimensions and characteristics are given for indication guideance only. DEUTSCH reserves the right to modify them for production improvement reasons www.deutsch.net DEUTSCH GLOBAL SALES NETWORK Contact your local sales office for further information: FRANCE Connecteurs Electriques Deutsch 17, rue Lavoisier BP 117 27091 Evreux Cedex 09 FRANCE Tel: +33 2 32 23 57 00 GERMANY Compagnie Deutsch GMBH Fraunhoferstrabe.11b 82152 Martinsried GERMANY Tel: +49 89 89 91 570 INDIA DIPC 104, Prestige Omega, EPIP Zone 1st Phase, White Field Road BANGALORE 560066 INDIA Tel: +91 80 28 54 13 25 ISRAEL Deutsch ECM P.O. Box 5082 Ashkelon 78150 Southern Industrial Zone ISRAEL Tel: +972 8 671 9020 ITALY Deutsch Italia S.R.L. Viale Jenner 51 20159 Milano ITALY Tel: +39 02 37 617 44 JAPAN Deutsch Japan Ltd. 4-3-28 Nishidai Itabashi-ku Tokyo 175-0045 JAPAN Tel: +81 3 5922 1345 UNITED KINGDOM Deutsch UK Stanier Road St Leonards on Sea East Sussex TN38 9RF UK Tel: +44 (0) 1424 852721 USA Deutsch DAO 250 Eddie Jones Way Oceanside, CA 92054 USA Tel: +1 (760) 757-7500 Literature Code CC 787-22 - C Edition September 2010 For more information, technical assistance or custom solutions: email ced@deutsch.net Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: EN4165A2AY222NB EN4165M71AC0G0 EN4165M71AC0U0 EN4165A04-121NM EN4165A04-122NM EN4165M71AC0G1 EN4165W15 EN4165M71AC0U1 EN4165M71AC EN4165A2AY221NB EN4165F7A220 EN4165F0A4A1 EN4165F7A234 EN4165W7A2A6 EN4165F6A423 EN4165W6A465 EN4165F0A425 EN4165F7A242 EN4165W6A422 EN4165W7A255 EN4165W6A230 EN4165W7A245 EN4165W7A224 EN4165W7A263 EN4165F0A461 EN4165F0A465 EN4165F6A466 EN4165W6A4A2 EN4165F6A432 EN4165W6A236 EN4165F0A421 EN4165W6A464 EN4165F7A236 EN4165W6A4A4 EN4165W7A261 EN4165W6A436 EN4165F6A253 EN4165F7A246 EN4165F7A255 EN4165W6A260 EN4165W7A221 EN4165F6A442 EN4165W7A256 EN4165F6A220 EN4165W6A221 EN4165F7A244 EN4165W6A252 EN4165F0A434 EN4165A20-222BM EN4165W6A214 EN4165W6A446 EN4165W6A421 EN4165W6A253 EN4165F7A241 EN4165W6A433 EN4165F7A251 EN4165F6A424 EN4165W6A4A0 EN4165F6A426 EN4165F6A463 EN4165P02 EN4165W6A235 EN4165F6A236 EN4165W6A466 EN4165F6A232 EN4165F6A245 EN4165A20-221NA EN4165W6A420 EN4165W6A244 EN4165F6A235 EN4165F0A435 EN4165F6A461 EN4165F6A435 EN4165F7A2A0 EN4165W6A441 EN4165W6A231 EN4165W6A226 EN4165F0A460 EN4165F6A422 EN4165F7A253 EN4165W6A455 EN4165F0A432 EN4165W6A434 EN4165W6A414 EN4165F6A260 EN4165A2AY222NF EN4165F6A243 EN4165F7A262 EN4165F7A265 EN4165F6A261 EN4165F6A244 EN4165W6A443 EN4165F0A454 EN4165F6A446 EN4165W6A444 EN4165W6A251 EN4165F7A2A3 EN4165F0A450 EN4165W6A415 EN4165W6A460