SmartPro 120V 1.5kVA 900W Line-Interactive
Sine Wave UPS, Tower, USB, DB9, 8 Outlets
MODEL NUMBER: SMC1500T
Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts,
brownouts, power surges and line noise. Pure sine wave output is compatible with active PFC power
supplies.
Description
The SMC1500T SmartPro 120V 1.5kVA 900W Line-Interactive Sine Wave UPS provides battery backup
and AC power protection against blackouts, brownouts, power surges and line noise that can damage
electronics or destroy data. Ideal for backing up high-performance workstations, servers and network
equipment, the SMC1500T switches to battery mode in milliseconds to keep your connected equipment
running long enough to save files and shut down safely with no data loss. Pure sine wave output is
compatible with active power factor correction (PFC) power supplies.
Featuring eight NEMA 5-15R outlets and a six-foot power cord with NEMA 5-15P input, the SMC1500T
has an internal battery that provides 17.4 minutes of support at half load and 6.4 minutes at full load.
Front-panel LEDs indicate load level, power, voltage correction, site wiring fault and battery statuses.
Automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output over an
input range of 83V–121V (100V), 87V–133V (110V) or 95V–145V (120V) without using battery power.
EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge
suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free
downloadable PowerAlert software, the SMC1500T enables safe unattended system shutdown and file
saves in case of a prolonged power failure.
Features
Protects Mission-Critical Electronic Equipment
Provides fully regulated pure sine wave AC output compatible with active PFC power supplies
●
Audible alarm signals loss of utility power, overload and low battery
●
Highlights
Corrects under- and
overvoltages from 95V to 145V
(120V)
●
8 NEMA 5-15R outlets
●
Monitoring of power conditions
via PowerAlert software
●
Front-panel LEDs indicate load,
power, voltage and battery
statuses
●
17.4 min. runtime at half load;
6.4 min. at full load
●
Package Includes
SMC1500T SmartPro 120V
1.5kVA 900W Line-Interactive
Sine Wave UPS
●
USB cable
●
Owner’s manual
●
1 / 5
Specifications
8 NEMA 5-15R outlets
●
6 ft. power cord with NEMA 5-15P input
●
570-joule surge suppression rating
●
Reliable Battery Backup
Supports half load up to 17.4 min. and full load up to 6.4 min.
●
Internal batteries designed for hot-swap field replacement
●
95% line-power efficiency rating saves money in energy costs
●
Automatic Voltage Regulation (AVR)
Maintains selectable nominal output without using battery power
●
Corrects brownouts and overvoltages from 83V–121V (100V), 87V–133V (110V) or 95V–145V (120V)
●
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s
performance
●
LED Indicators
Front-panel LEDs indicate load level, power, voltage correction, site wiring fault and battery statuses
●
Communications Ports
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert
●
RJ45 Telephone/Ethernet Protection Jacks
Protect phone/DSL/fax/modem/Ethernet network against power surges
●
OVERVIEW
UPC Code 037332188809
UPS Type Line-Interactive
INPUT
Rated input current (Maximum Load) 10.1A (120V), 9.3A (110V), 8.6A (100V)
Nominal Input Voltage(s) Supported 100V AC; 110V AC; 120V AC
UPS Input Connection Type 5-15P
UPS Input Cord Length (ft.) 6
UPS Input Cord Length (m) 1.8
2 / 5
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 900
Nominal Voltage Details 120V default (voltage selection via back panel switches)
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line
Mode) -13%, + 15%
Output Voltage Regulation (Battery
Mode) +/- 5%
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery
Mode) Pure Sine wave
Nominal Output Voltage(s)
Supported 100V; 110V; 120V
Output Receptacles (8) 5-15R
Individually Controllable Load Banks No
BATTERY
Battery Type Valve Regulated Lead Acid (VRLA)
Full Load Runtime (min.) 6.4 min. (900w)
Half Load Runtime (min.) 17.4 min. (450w)
Expandable Runtime No
DC System Voltage (VDC) 36
Battery Recharge Rate (Included
Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Battery Access Battery access door
Internal UPS Replacement Battery
Cartridge &nbsp;<a class="productLink" href="//www.tripplite.com/UPS-Replacement-36VDC-Battery-Cartridge-for-select-
Tripp-Lite-SLT-UPS~RBC36-SLT">RBC36-SLT</a>&nbsp;
Battery Replacement Description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145 (120v),
87 to 133 (110v), 83 to 121 (100v)
Overvoltage Correction Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
Undervoltage Correction Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
3 / 5
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support
nominal voltage selection
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates power failure and overload conditions
LED Indicators Status LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter
for load and battery charge level
Site Wiring Fault Indication Rear panel site wiring fault LED
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
UPS AC Suppression Response
Time Instantaneous
UPS Dataline Suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Cooling Method Fan
Installation Form Factors Supported
with Included Accessories Tower
Primary Form Factor Tower
Primary UPS Depth (mm) 335
Primary UPS Height (mm) 259
Primary UPS Width (mm) 173
Shipping Dimensions (hwd / cm) 35.56 x 24.38 x 46.48
Shipping Dimensions (hwd / in.) 14.00 x 9.60 x 18.30
Shipping Weight (kg) 19.91
Shipping Weight (lbs.) 43.90
UPS Housing Material Steel
UPS Power Module Dimensions
(hwd, cm) 25.91 x 17.27 x 33.53
UPS Power Module Dimensions
(hwd, in.) 10.2 x 6.8 x 13.2
UPS Power Module Weight (kg) 20.41
UPS Power Module Weight (lbs.) 45
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
4 / 5
© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Relative Humidity 5 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 148
Battery Mode BTU / Hr. (Full Load) 500
AC Mode Efficiency Rating (100%
Load) 95%
COMMUNICATIONS
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
http://www.tripplite.com/poweralert
Communications Cable USB cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications.
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at
http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
Communications Interface DB9 Serial; USB (HID enabled)
LINE / BATTERY TRANSFER
Transfer Time 4 milliseconds
Low Voltage Transfer to Battery
Power (Setpoint) 95V (120V), 87V (110V), 83V (100V)
High Voltage Transfer to Battery
Power (Setpoint) 145V (120V), 133V (110V), 121V (100V)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure) Cold-start operation supported
High Availability UPS Features Automatic Voltage Regulation (AVR); Hot swappable batteries; Sine wave output; Surge/noise protection
STANDARDS & COMPLIANCE
UPS Certifications Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada);
Tested to NOM (Mexico); Tested to UL1778 (USA)
WARRANTY
Product Warranty Period
(Worldwide) 2-year warranty, 3 year with registration. Note:&nbsp;<a class="insuranceLink"
href="//www.tripplite.com/support/product-warranty-registration">Registration is required</a>&nbsp;for 3-year
warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico) $250,000&nbsp;<a class="insuranceLink" href="//www.tripplite.com/support/insurance-policy">Ultimate Lifetime
Insurance</a>&nbsp;
5 / 5