++ STEGO UK Ltd. + Unit 12, First Quarter Business Park + Blenheim Road + Epson, Surrey KT19 9QN + England + info@stego.co.uk +www.stego.co.uk ++
Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/
buyer in its final application. 04.08.2010 Heating
11
50
0
200
150
100
Heizleistung (W)
-40 -20 0
Umgebungstemperatur(°C)
Leistungs-Umgebungstemperatur-Diagramm
CS 160
20 40
Art. Nr.16000.0-00
Art. Nr.16010.0-00
Art. Nr.16020.0-00
178
160
147
132
119
122
110
102
93
85
66 61 55
50 44
Low surface temperature
Integrated thermostat
Quick mounting due to clip fixing
Double insulated (plastic)
Wide voltage range
Small size
Technical Data
Operating voltage 120-240VAC* (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Surface temperature < 80°C (176°F), except upper protective grille
Connection 2-pole terminal 2,5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating / Storage temperature -40 to +70°C (-40 to +158°F) / -45 to +70°C (-49 to +158°F)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP20 / II (double insulated)
Approvals VDE
Note other voltages on request
*Operating with voltages below 140VAC reduces heating performance by approx. 10%.
Heating capacity / Ambient temperature diagram CSF 060
Heating capacity (W)
Temperature (°C)
150W
100W
50W
1) ambient temperature - see Heating capacity / Ambient temperature diagram; 2) measured 50mm above protective grille; 3) tolerance of ± 5K;
Art. No. Heating
capacity1)
Inrush current
max.
Pre-fuse
T (time-delay)
Air outlet
temperature2)
Switch-off
temperature3)
Switch-on
temperature3) Dimensions Weight
(approx.)
06001.0-00 50W 2.5A 4A +86°C (186.8°F) +15°C (59°F) +5°C (41°F) 110 x 60 x 90mm 0.3kg
06002.0-00 50W 2.5A 4A +86°C (186.8°F) +25°C (77°F) +15°C (59°F) 110 x 60 x 90mm 0.3kg
06011.0-00 100W 4.5A 8A +120°C (248°F) +15°C (59°F) +5°C (41°F) 110 x 60 x 90mm 0.3kg
06012.0-00 100W 4.5A 8A +120°C (248°F) +25°C (77°F) +15°C (59°F) 110 x 60 x 90mm 0.3kg
06021.0-00 150W 8A 8A +145°C (293°F) +15°C (59°F) +5°C (41°F) 150 x 60 x 90mm 0.5kg
06022.0-00 150W 8A 8A +145°C (293°F) +25°C (77°F) +15°C (59°F) 150 x 60 x 90mm 0.5kg
Example of connection
Heater CSF 060
90
23 L 60
Touch-Safe Heater CSF 060 Series 50W to 150W
(semiconductor)
Touch-safe heater for the use in enclosures with electrical/electronical components. The design
of the heater supports the natural convection which results in a high air-current of warm air. The
surface temperatures on the accessible side surfaces of the housing are kept down as a result
of the heater design. This model with plug-in thermostat does not require additional wiring. The
heaters are designed for permanent operation. This heater is also available in a version without
thermostat (CS 060).
