TGL200U06 ... TGL200U10 TGL200U06 ... TGL200U10 Series Connection of Ultrafast Switching Blocking Diode and Transient Voltage Suppressor Reihenschaltung von ultraschneller Sperrdiode und Spannungs-Begrenzer Version 2012-08-27 300 W 0.5 Repetitive peak reverse voltage (blocking diode) Periodische Spitzensperrspannung (Sperrdiode) Nominal breakdown voltage (voltage suppressor) Nominale Abbruchspannung (Spannungs-Begrenzer) Plastic case MELF Kunststoffgehause MELF 0.5 Type Typ 5.0 2.5 Peak pulse power dissipation Impuls-Verlustleistung Dimensions - Mae [mm] Ring = voltage suppressor/ Spannungsbegrenzer 600...1000 V 200 V DO-213AB Weight approx Gewicht ca. 0.12 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Marking: When a positive voltage is applied to the contact marked by a ring, a 200 V breakdown can be measured; the ring does not specify the cathode of the blocking diode! Kennzeichnung: Bei Anlegen einer positiven Spannung an den mit Ring gekennzeichneten Anschluss kann der 200V Abbruch gemessen werden; der Ring kennzeichnet nicht die Kathode der Sperrdiode! Maximum ratings and Characteristics Grenz- und Kennwerte Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 25C PM(AV) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT Blocking diode 1 W 1) -50...+175C -50...+175C < 45 K/W < 10 K/W Sperrdiode Repetitive peak reverse voltage Periodische Spitzensperrspannung TGL200U06 TGL200U08 TGL200U10 VRRM VRRM VRRM Reverse recovery time Sperrverzug IF = 0.5 A through/uber IR = 1 A to IR = 0.25 A trr typ. 75 ns VR = VRRM IR < 10 A Leakage current Sperrstrom 1 Tj = 25C 600 V 800 V 1000 V Mounted on P. C. board with 25 mm copper pads at each terminal Montage auf Leiterplatte mit 25 mm Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 1 TGL200U06 ... TGL200U10 Transient Voltage Suppressor Spannungs-Begrenzer-Diode Peak pulse power dissipation (10/1000 s waveform, see curve) Impuls-Verlustleistung (Strom-Impuls 10/1000 s, siehe Kurve) Type Typ TA = 25C Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA VWM [V] ID [A] VBR [V] 162 5 TGL200Fxx 200 10% 180...220 PPPM 300 W Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s) VC [V] IPPM [A] 287 1 120 [%] tr = 10 s 100 100 [%] 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [C] IPPM/2 PPPM/2 tP 0 1 2 3 [ms] 4 10/1000s - pulse waveform 10/1000s - Impulsform 1 Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 1 102 [kW] 10 1 PPP 0.1 0.1s tP 1s 10s 100s 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) 1 2 Mounted on P. C. board with 25 mm copper pads at each terminal Montage auf Leiterplatte mit 25 mm Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG