Photoelectric Sensor with Built-in Amplifier for Detecting Clear, Plastic Bottles E3Z-B CSM_E3Z-B_DS_E_10_1 Reliable Detection of Transparent Objects, Including Thin-walled Clear, Plastic Bottles * Uses OMRON's unique optical system ("Inner View") that can detect various shapes of clear, plastic bottles. * Detects a wide range of bottles from 500-ml bottles to 2-l bottles, and from single bottles to sets of stocked bottles. * Provides a high degree of protection (IP67), mutual interference prevention, and EN standard compliance. Be sure to read Safety Precautions on page 4. Ordering Information Sensors Sensing method Red light Appearance Connection method *1 Pre-wired (2 m) Connector (M8, 4 pins) Pre-wired (2 m) Connector (M8, 4 pins) Retro-reflective (without MSR function) *1 Sensing distance 500 mm (80 mm) 2 m (500 mm) *2 *2 *3 Model NPN output PNP output E3Z-B61 2M *4 E3Z-B81 2M *4 *5 E3Z-B66 E3Z-B86 E3Z-B62 2M *4 *5 E3Z-B82 2M *4 *5 E3Z-B67 E3Z-B87 *1. The Reflector is sold separately. *2. The specified sensing distance is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and the Reflector. *3. Install the Sensor so that plastic bottles are at least 500 mm from the Sensor when they pass. *4. Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-B61 0.5M). *5. M12 Standard Pre-wired Connector Models are also availavble. When ordering, add "-M1J 0.3M" to the end of the model number (e.g., E3Z-B62-M1J 0.3M). The cable is 0.3 m long. Accessories (Order Separately) Reflectors Type Standard Fog Preventive Coating Model Sensing distance (typical) E3Z-B@1/-B@6 E3Z-B@2/-B@7 E39-R1S E39-R1K Quantity 1 500 mm (80 mm) * (rated value) 2 m (500 mm) * (rated value) 1 Remarks The E3Z-B is not provided with a Reflector. * Values in parentheses indicate the minimum required distance between the Sensor and Reflector. Mounting Brackets Refer to E3Z for details. Sensor I/O Connectors Refer to E3Z for details. 1 E3Z-B Ratings and Specifications Sensing method Model Item Retro-reflective (without MSR function) NPN output E3Z-B61 E3Z-B66 E3Z-B62 E3Z-B67 PNP output E3Z-B81 E3Z-B86 E3Z-B82 E3Z-B87 Sensing distance 500 mm (80 mm) *1 (using E39-R1S) Standard sensing object 500-ml (65-mm dia.) transparent round plastic bottles Light source (wavelength) Red LED (680 mm) Power supply voltage 12 to 24 VDC10%, ripple (p-p): 10% max. Current consumption 30 mA max. Control output Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection Response time Operate or reset: 1 ms max. Sensitivity adjustment One-turn adjuster Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C, Storage:-40 to 70C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 M min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IP67 (IEC60529) Connection method Pre-wired cable (standard Connector (M8, 4 pins) length: 2 m and 0.5 m) Indicator Operation indicator (orange) Stability indicator (green) Weight (packed state) 2 m (500 mm) *1 *2 (using E39-R1S) Pre-wired cable (standard Connector (M8, 4 pins) length: 2 m and 0.5 m) Pre-wired cable (2 m) Approx. 65 g Material Standard Connector Approx. 20 g Case PBT (polybutylene terephthalate) Lens Modified polyarylate Accessories Instruction manual (The Reflector or Mounting Bracket are ordered separately.) *1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors. *2. Plastic bottles must pass with the minimum clearance of 500 mm. Engineering Data (Reference Value) Parallel Operating Range Excess Gain vs. Set Distance 30 Y 20 X 10 0 -10 0.5 1 1.5 Reflector: E39-R1S 80 60 Y 40 2.5 3 Distance X (m) 0 0.5 1 500-mm type 10 2-m type 10 1.5 2 2.5 3 3.5 4 4. 5 Distance X (m) -20 1 1 -40 -30 100 100 X 20 2 -20 -60 -40 -50 100 Excess gain ratio Reflector: E39-R1S 40 Excess gain ratio 50 Distance Y (mm) Distance Y (mm) E3Z-B@1/B@6 + E39-R1S E3Z-B@2/B@7 + E39-R1S E3Z-B@1/B@6 + E39-R1S E3Z-B@2/B@7 + E39-R1S Reflector (Order Separately) Reflector (Order Separately) Reflector (Order Separately) Reflector (Order Separately) 500-mm type -80 -100 2-m type 0.1 0.1 0.5 1 1.5 2 2 .5 3 Distance (m) 0.5 1 1.5 2 2.5 3 3 .5 4 4 .5 5 Distance (m) 2 E3Z-B I/O Circuit Diagrams NPN Output Model Operation mode Light-ON Timing charts Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operation selector Output circuit Retro-reflective Model L side (LIGHT ON) Operation indicator (orange) Operate Load (e.g., relay) Reset E3Z-B61 E3Z-B62 E3Z-B66 E3Z-B67 Photoelectric Sensor Main Circuit (Between brown and black leads) Dark-ON 1 Stability indicator (green) Brown (Control output) Black 12 to 24 VDC 100mA max. Load (relay) 4 ZD 3 Blue 0V Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Connector Pin Arrangement D side (DARK ON) 2 4 1 Operate Load (e.g., relay) Reset (Between brown and black leads) 3 Pin 2 is not used. PNP Output Model Operation mode Timing charts Light-ON Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset (Between blue and black leads) E3Z-B81 E3Z-B82 E3Z-B86 E3Z-B87 Operation selector Output circuit Retro-reflective Model L side (LIGHT ON) Operation indicator (orange) 1 Stability indicator (green) Photoelectric Sensor Main Circuit Brown 12 to 24 VDC ZD 4 Black (Control output) 3 Blue 100mA max. Load (relay) 0V Dark-ON Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset (Between blue and black leads) Connector Pin Arrangement D side (DARK ON) 2 1 4 3 Pin 2 is not used. Plugs (Sensor I/O Connectors) M8 connector Pin arrangement Wire color 4 3 2 1 Brown White Blue Black 1 2 3 4 XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Classification DC Wire color Connector pin No. Brown 1 White 2 Blue 3 Black 4 Application Power supply (+V) --Power supply (0 V) Output Note: Pin 2 is not used. 3 E3Z-B Safety Precautions Refer to Warranty and Limitations of Liability. WARNING Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Designing Bottles The Sensor may be unable to achieve stable detection depending on the shape of the bottles or the position in which the bottles pass. Be sure to verify stable detection before using the Sensor. Mounting Sensor Mounting If the Sensor fails to provide stable detection due to the shape of the bottles or the position in which the bottles pass, adjust the location and inclination of the Sensor. (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Sensors Retro-reflective Models 11.2 Operation Indicator (orange) 7.5 Pre-wired Models E3Z-B61 E3Z-B81 E3Z-B62 E3Z-B82 Stability indicator (green) Operation selector Sensitivity adjuster 10.8 2.1 Receiver Lens 7 dia. 2.8 4.5 Stability indicator (green) 10.8 3 2.8 Receiver Lens 7 dia. 20 3 16.7 31 8 25.4 4.5 Operation selector Sensitivity adjuster 2.1 20 11.2 Operation Indicator (orange) 7.5 Connector Models E3Z-B66 E3Z-B86 E3Z-B67 E3Z-B87 16.7 31 8 25.4 Emitter Lens 7 dia. Two, M3 Emitter Lens 7 dia. Two, M3 10.4 M8 connector 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2 (AWG24); Insulator diameter: 1.1 mm), Standard length: 2 m M12 Pre-wired Connector (E3Z-@@@-M1J) 9.75 4 dia. vinyl-insulated round cable with 3 conductors Standard length: 0.3 m 1 M12x1 2 4 3 M8 Pre-wired Connector (E3Z-T@@K-M3J) 4 dia. vinyl-insulated round cable with 3 conductors Standard length: 0.3 m 2 4 1 M8 3 Terminal No. Specifications 1 +V 2 --- 3 0V 4 Output Accessories (Order Separately) Reflectors Refer to E39-R for details. Mounting Brackets Refer to E39-L for details. Sensor I/O Connectors Refer to XS2F and XS3F for details. 4 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2013.12 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2013 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: E3Z-B61 E3Z-B61 0.5M E3Z-B62 E3Z-B62 0.5M E3Z-B66 E3Z-B67 E3Z-B81 E3Z-B81 0.5M E3Z-B82 E3Z-B82 0.5M E3Z-B86 E3Z-B87