MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Features Rev. V3 Functional Schematic 6-bit, 0.5 dB LSB, 31.5 dB range DC to 30 GHz operation Integrated TTL 0/+5V control +/- 0.5 dB typical bit error Low RMS phase 4.3 @ 20 GHz Lead-Free 3 mm 16-lead PQFN package ESD protection for all controls and bias Description The MAAD-011021 is a wide band 6-bit digital attenuator covering DC to 30 GHz. The attenuation bit-values are 0.5 dB LSB (least significant bit), 1, 2, 4, 8, and 16 dB for a total attenuation of 31.5 dB. Attenuation error is typically less than +/- 0.5 dB, RMS phase error is less than 5 degrees at 20 GHz, and typical insertion loss is 7.2 dB at 15 GHz. Return loss is typically 12 dB across all frequencies and attenuation states. The attenuator integrates an inverter to allow a single control for series/shunt attenuation. Inverter requires a -5 V supply (VCC) and 17 mA typical, logic is 0 V / +5 V. Pin Configuration3 Pin No. Function Pin No. Function 1 Ground 9 V6 (16 dB) 2 RF Input 10 Ground 3 Ground 11 RF Output 4 V1 (0.5 dB) 12 Ground 5 V2 (1 dB) 13 No Connection 6 V3 (2 dB) 14 No Connection 7 V4 (4 dB) 15 VCC -5 V Bias 8 V5 (8 dB) 16 No Connection 17 Pad4 The device is also available as bare die; order part number MAAD-011021-0GPDIE. Ordering Information1,2 Part Number Package MAAD-011021 Bulk Part MAAD-011021-TR0500 500 piece reel MAAD-011021-SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 3 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Electrical Specifications: TA = +25C, VCC = -5 V, Z0 = 50 (unless otherwise specified) Parameter Test Conditions Units Min. Typ. Max. Insertion Loss DC - 15 GHz 15 - 30 GHz 1 GHz 10 GHz 15 GHz dB -- 6.0 8.0 5.0 7.0 7.5 -- -- 5.5 8.0 8.5 Return Loss DC - 30 GHz dB -- 15 -- Attenuation Bits 10 GHz LSB: 0.5 dB Bit 2: 1 dB Bit 3: 2 dB Bit 4: 4 dB Bit 5: 8 dB Bit 6: 16 dB 0.3 0.8 1.8 3.8 7.6 16.0 0.4 1.0 2.0 4.0 8.3 17.0 0.5 1.1 2.2 4.2 8.9 18.0 dB Attenuation Error RMS DC - 15 GHz 15 - 30 GHz dB -- 0.3 1.2 -- Phase Error RMS DC - 15 GHz 15 - 30 GHz deg -- 2.6 7.2 -- Input P0.1dB DC - 30 GHz dBm -- 24 -- Input IP3 DC - 30 GHz dBm -- 38 -- Switching Time -- ns -- 45 -- Control Logic -- V -- 0 / +5 -- Control Current each control bit @ +5 V mA -- 6 -- Supply Current Supply = -5 V mA -- 17 45 Absolute Maximum Ratings5,6 Parameter Absolute Maximum Input Power +35 dBm Operating Voltage -5 V Control Voltage 0 / +5 V Operating Temperature -40C to +85C Storage Temperature -65C to +150C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1A devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Truth Table7,8 V1 0.5 dB V2 1 dB V3 2 dB V4 4 dB V5 8 dB V6 16 dB State low low low low low low 0 dB high low low low low low 0.5 dB low high low low low low 1 dB low low high low low low 2 dB low low low high low low 4 dB low low low low high low 8 dB low low low low low high 16 dB high high high high high high 31.5 dB 7. high = +5 V @ 5.7 mA, low = 0 V @ 1.0 mA. 8. Any combination of the above states will provide attenuation approximately equal to the sum of the bits selected. Evaluation Board PCB Layout Application Schematic Parts List VCC = -5 V Part Value Case Style J1, J2 0 0201 RFIN RFOUT V1 V2 V3 V4 V5 V6 = 0 / +5 V 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Typical Performance Curves P0.1dB Compression Insertion Loss 0 30 +25C -40C +85C -4 +25C -40C +85C 28 26 -8 24 -12 -16 22 0 5 10 15 20 25 30 20 0 5 Frequency (GHz) 15 20 25 30 25 30 25 30 Frequency (GHz) Maximum Output Return Loss (all states) Maximum Input Return Loss (all states) 0 0 +25C -40C +85C -4 -8 -12 -12 0 5 10 +25C -40C +85C -4 -8 -16 10 15 20 25 30 -16 0 5 Frequency (GHz) 10 15 20 Frequency (GHz) Input IP3 (reference states) Noise Figure (reference states) 60 12 +25C -40C +85C 50 10 8 40 6 30 4 20 10 4 2 0 5 10 15 20 Frequency (GHz) 25 30 0 0 5 10 15 20 Frequency (GHz) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Typical Performance Curves Attenuation Relative Attenuation 0 0 -5 -4 -10 -8 -15 -20 REF Bit 1 Bit 2 Bit 3 -12 -25 REF Bit 1 Bit 2 Bit 3 -30 -35 0 -16 Bit 4 Bit 5 Bit 6 5 Bit 4 Bit 5 Bit 6 10 15 20 25 30 -20 0 5 10 15 20 25 30 25 30 25 30 Frequency (GHz) Frequency (GHz) RMS Phase Error RMS Attenuation Error 4 25 20 3 15 2 10 1 0 5 0 5 10 15 20 25 30 0 0 5 10 Frequency (GHz) 15 20 Frequency (GHz) Relative Phase Error Relative Attenuation Error 2 40 REF Bit 1 Bit 2 Bit 3 1 20 0 Bit 4 Bit 5 Bit 6 0 -1 -2 REF Bit 1 Bit 2 Bit 3 -3 -4 0 5 -20 Bit 4 Bit 5 Bit 6 10 15 20 Frequency (GHz) 25 30 -40 0 5 10 15 20 Frequency (GHz) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Typical Performance Curves Relative Attenuation Error (Bit 1, 2) Relative Phase Error (Bit 1, 2) 2 40 30 1 Bit 1 Bit 2 20 0 10 -1 0 -10 Bit 1 Bit 2 -2 -20 -3 -4 -30 0 5 10 15 20 25 30 -40 0 5 10 Frequency (GHz) 15 20 25 30 25 30 25 30 Frequency (GHz) Relative Phase Error (Bit 3, 4) Relative Attenuation Error (Bit 3, 4) 2 40 30 1 Bit 3 Bit 4 20 0 10 -1 0 -10 Bit 3 Bit 4 -2 -20 -3 -4 -30 0 5 10 15 20 25 30 -40 0 5 10 Frequency (GHz) 20 Relative Phase Error (Bit 5, 6) Relative Attenuation Error (Bit 5, 6) 2 40 30 1 Bit 5 Bit 6 20 0 10 -1 0 -2 -10 Bit 5 Bit 6 -20 -3 -4 15 Frequency (GHz) -30 0 5 10 15 20 Frequency (GHz) 25 30 -40 0 5 10 15 20 Frequency (GHz) 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Typical Performance Curves Step Error Between Successive States Switching Time 2.0 2 GHz 5 GHz 10 GHz 20 GHz 1.5 1.0 7 0 6 -5 5 -10 0.5 4 0.0 3 -0.5 2 -25 -1.0 1 -30 -1.5 0 -35 -2.0 0 5 10 15 20 25 30 35 Attenuation State (dB) -1 -100 -15 Control Voltage (L) -20 S21 (R) -50 0 50 100 150 200 250 -40 300 Time (ns) Phase Error over Attenuation States 20 15 10 5 0 -5 1 GHz 3 GHz 5 GHz 10 GHz 20 GHz -10 -15 -20 0 5 10 15 20 25 30 35 Attenuation State (dB) 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 Lead-Free 3 mm 16-Lead PQFN Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. Application Information The MAAD-011021 is designed for extremely wide band and robust attenuation applications. It uses a combination of series and shunt cold channel, multiple-gate FETs to achieve high linearity and accurate attenuation repeatability. We recommend using double bonds at both RF input and output, as well as keeping bondwires as short as possible. This part is the most accurate for X-band applications. The MAAD-011021 has a built in inverter function which allows a single +5 V / 0 V single control for each bit. This is useful if you require very fast switching times and have +5 V / 0 V available. The MAAD-011021 is DC-coupled at both RFIN and RFOUT. If operation at DC is desired, 0 jumpers (or continuous 50 RF lines) should be used in series with RF IN and RFOUT. Customer should take extra care to ensure that the voltage at both RFIN and RFOUT are 0 V; excess voltage can damage the part. If operation at DC is not required, simply use series blocking capacitors. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport MAAD-011021 Digital Attenuator, 6-Bit, 0.5 dB LSB step DC - 30 GHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 9 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macomtech.com/content/customersupport