Ha-VIS eCon 3000 Fast and Full Gigabit Ethernet Basic Technical characteristics Switch Features Ha-VIS eCon Switch type Supported standards Support of jumbo frames Non-blocking PROFINET compatible EthernetIP compatible Frame Size Quality of Service Energy Efficient Ethernet Unmanaged Ethernet Switch IEEE 802.3 No (Fast Ethernet Basic) Yes (Full Gigabit Ethernet Basic) Yes Yes Yes 1522 bytes (Fast Ethernet Basic) 10 kbytes (Full Gigabit Ethernet Basic) Yes Yes Ethernet Ports Twisted Pair Transfer standard Auto-Negotiation Auto-Polarity Auto-MDI(X) Transfer length 10BASE-Te / 100BASE-TX EEE; (Fast Ethernet Basic) 10BASE-Te / 100BASE-TX EEE / 1000BASE-T EEE; (Full Gigabit Ethernet Basic) Yes Yes Yes 100 m (twisted pair, Cat 5) Ethernet ports, fibre optic cables Transfer standard Wavelength Output capacity in dBm Receiver sensitivity 100BASE-FX (Fast Ethernet Basic) 1000BASE-SX (MM) / 1000BASE-LX (SM); (Full Gigabit Ethernet Basic) 1310 nm (Fast Ethernet Basic) 850 nm (MM) / 1310 nm (SM); (Full Gigabit Ethernet Basic) -20 dBm ... -14 dBm (MM) / -15 dBm ... -8 dBm (SM); (Fast Ethernet Basic) -9.5 dBm ... -4 dBm (MM) / -9.5 dBm ... -3 dBm (SM); (Full Gigabit Ethernet Basic) -30 dBm (MM) / -32 dBm (SM); (Fast Ethernet Basic) -17 dBm (MM) / -21 dBm (SM); (Full Gigabit Ethernet Basic) Ethernet ports, SFP Transfer standard Termination Transfer conditions Transfer speed Transfer length Depending on used SFP Depending on used SFP, RJ45 or LC Depending on used SFP, twisted pair or optical fibre cable Depending on used SFP, 100 or 1000 Mbit/s Depending on used SFP Status and diagnostics displays (Switch and Ports) Power lit green Link/Activity ("L/A") off Link/Activity ("L/A") lit green Link/Activity ("L/A") flashes green Link speed ("Spd") off Link speed ("Spd") lit yellow Link speed ("Spd") lit green PoE off PoE lit green PoE lit blue PoE lit red 01 30 Supply voltage is applied No link Link is active Link is active and data is transferred 10 Mbit/s 100 Mbit/s 1000 Mbit/s (Full Gigabit Ethernet Basic) PoE is inactive / low voltage Voltage in PoE range Voltage in PoE+ range Fault (see manual)