CSM 700
ISOCOM®LTD
Small Outline
Surface Mount
High Gain
Optocoupler
Device
3.0
3.0
CSM 700 0.6
*6
4
5
3
2
1 6
1.5
.95
1.2
.25
1.5
1.6
Isocom Ltd supplies high reliability devices for
applications requiring an operating temperature
range of -55°C to +125°C (e.g. military
applications).
Devices supplied are approved to BS9400, and have
completed rigorous testing. Various high reliability
test options are offered.
As a manufacturer of high reliability optocouplers,
the Isocom Ltd manufacturing plant in the North
East of England has site approval to BS9OOO
(registration number 1294/M) and CECC2OOOO
(registration number M/1084/CECC/UK) issued by
the British Standards Institution.
Together with CECC, BS9OOO is a preferred
standard for use in European military projects.
Consequently, Isocom Ltd's approved devices are
listed in the CECC "MUAHAG" preferred products
list.
The BS9000 approval is also recognised as meeting
the equivalent criteria to those required by
BS5750/IS09000/EN29000.
The Company's customers can be assured of our
commitment to stringent quality, reliability and
inspection standards, as demonstrated by our
existing approvals. Other customer specific options
can also be offered.
Features Applications
Hermetically sealed 6 pad Military, high reliability system
leadless chip carrier
Telephone ring detection
Low input current requirment (0.5mA)
Microprocessor system interface
1500V DC withstand test voltage
Level shifting
High radiation immunity
Digital logic ground isolation
High current transfer ratio
(1000% typical) System test equipment
Low power consumption Isolation input line receiver
Anode
1
Vcc
6
Vo
5
Gdn
4
Cathode
2
Description
The CSM700.consists of an IR light emitting diode, optically coupled to a corresponding
integrated high gain photon detector. The high gain output stage features an open collector output
providing both lower output saturation voltage and higher speed of operation than is possible with
conventional photo-darlington type coupler.
The minimum CTR of 200% at an input current of 0.5mA makes it ideal for use in a low input current
applications such as MOS, CMOS and low power logic interfacing or data transmission systems.
Absolute Maximum Ratings
Storage temperature ..... -65oC to +150oC
Operating temperature ..... -55oC to +125oC
Input Diode Output Detector
Forward DC current ..... 8mA Supply voltage Vcc -0.5 to 20vV
Reverse DC voltage ..... 5V Average current Io 40mA
..... Peak current Io 16mA
Voltage Vo -0.5 to 20V
..... Emitter-base reverse voltage BVEBO 3V
Base current Ib 5mA
Collector power dissipation 50mW
Electrical Characteristics (TA = -55 to 125oC U.O.S) *All typical values at TA = 25OC
parameter symbol Test Conditions min *typ max Units
High level output current IOH VF=0.7V VO=VCC=18V 0.001 250
µA
Low level output voltage VOL V
CC=4.5 IF=0.5mA IOL=1.0mA 0.1 0.4 V
V
CC=4.5 IF=1.6mA IOL=3.2mA 0.15 0.4 V
V
CC=4.5 IF=5mA IOL=10mA 0.12 0.4 V
High level supply current ICCH I
F=0 VCC=18V 0.01 7.5
µA
Low level supply current ICCL I
F=1.6mA VCC=18V 0.8 2.0 mA
I/O insulation leakage current II/O V
I/O=1500Vdc TA=25OC t=5s
Relative Humidity =45% 1.0
µA
Input forward voltage VF I
F=1.6mA TA=25OC 1.0 1.6 V
Input reverse breakdown voltage VBR IR=10µA 5.0 V
Propagation delay to logic high o/p tPLH RL=4.7KΩ IF=0.5mA VCC=5V 20 185
µS
RL=2.2KΩ IF=1.6mA VCC=5V 15 115
µS
RL=680Ω IF=5mA VCC=5V 8 60
µS
Propagation delay to logic low o/p tPHL RL=4.7KΩ IF=0.5mA VCC=5V 11 185
µS
RL=2.2KΩ IF=1.6mA VCC=5V 5 30
µS
RL=680Ω IF=5mA VCC=5V 3 12
µS
Current transfer ratio CTR IF=0.5mA VO=0.4V VCC=4.5V 200 1300 %
I
F=1.6mA VO=0.4V VCC=4.5V 200 1000 %
I
F=5mA VO=0.4V VCC=4.5V 200 600 %
Common mode transient immunity at
logic high output CMH V
CC=5V TA=25OC IF=0mA
VCM=50Vp-p RL=2.2KΩ 500 1000 V/µS
Common mode transient immunity at
logic low output CML V
CC=5V TA=25OC IF=1.6mA
VCM=50Vp-p RL=2.2KΩ -500 -1000 V/µS
Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use.
Isocom Ltd cannot accept liability for any errors or omissions.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com
Or go to the Isocom Website @: Http://www.isocom.uk.com
