163
Aluminum Electrolytic Capacitors
SG
series
SG
SPECIFICATIONS
Items 項 目Characteristics 特 性
Capacitance Tolerance
靜電容量誤差 ± 20%(120Hz﹐20℃)
Operating Temperature Range
適用溫度範圍 -40 ~ +105℃
Rated Voltage Range
額定電壓範圍 6.3 ~ 50VDC
Leakage Current
洩漏電流
I ≦ 0.01CV or 3 (µA) which is greater. ( After 2 minutes application of DC rated voltage, at 20 ℃)
Dissipation Factor
散逸因素( tan δ)
Measurement Frequency: 120Hz. Temperature: 20℃
Rated Voltage(V) 6.3 10 16 25 35 50
tan δ(Max) 0.15 0.12 0.10 0.09 0.08 0.07
When nominal capacitance over 1000µF, tanδ shall be added 0.02 to the listed value with
increase of every 1000µF.
Low Temperature Stability
低溫特性
Impedance Ratio(Max)
阻抗比率(最大值)
Measurement Frequency: 120Hz.
Rated Voltage(V) 6.3 10 16 25 35 50
Z(-25℃) ∕ Z(20℃) 2 2 2 2 2 2
Z(-40℃) ∕ Z(20℃) 3 3 3 3 3 3
Load Life 負荷壽命
The following specifications shall be satisfied when the capacitors are restored to 20℃ after
subjected to DC voltage with the rated ripple currrent is applied for 5,000 hours (ψD≦6.3:2,000
hours;ψD=8:3,000 hours;ψD=10:4,000 hours) at 105℃.
Capacitance Change Within ± 25% of Initial Value
tan δ 200% or less of Initial Specied Value
Leakage Current Initial Specied Value or less
Shelf Life 放置壽命
The following specications shall be satised when the capacitors are restored to 20℃ after
exposing them for 1,000 hours 105℃ without voltage applied. Before the measurement, the
capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4.
Capacitance Change Within ± 20% of Initial Value
tan δ 200% or less of Initial Specied Value
Leakage Current Initial Specied Value or less
Standards 參照標準 JIS C 5101-4 (IEC 60384)
Frequency Coecient of Permissible Ripple Current
Capacitance (μF) Frequency (Hz)
50 120 1K 10K 100K
≦ 33 0.45 0.55 0.75 0.90 1.00
47 ~ 330 0.60 0.70 0.85 0.95 1.00
470 ~ 1000 0.65 0.75 0.90 0.98 1.00
1200 ~ 6800 0.75 0.80 0.95 1.00 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use , the rms ripple current has to be reduced.
‧High ripple current, ultra low impedance at high frequency range.
‧Long life.
‧RoHS Compliance
‧高紋波電流、高頻超低阻抗。
‧長壽命產品。
164
Aluminum Electrolytic Capacitors
series
SG
ψD 5 6.3 8 10 13 16
P 2.0 2.5 3.5 5.0 5.0 7.5
ψd 0.5 0.5 0.5 0.6 0.6 0.8
STANDARD RATINGS
Cap
(μF)
V6.3 10 16
Item D x L R.C. IMP D x L R.C. IMP D x L R.C. IMP
56 05x11 250 0.300
100 05x11.250 0.300
120 6.3x11.405 0.130
150 05x11 250 0.300
220 6.3x11.. 405 0.130
330 6.3x11.405 0.130 08x12.600 0.085 08x12 760 0.072
470 08x12 760 0.072 08x16 995 0.056
10x13 1030 0.053
560 08x12 760 0.072
680 08x16 995 0.056 08x20 1250 0.041
10x13 1030 0.053 10x16 1430 0.038
820 08x16 995 0.056
1000 10x13 1030 0.053 08x20 1250 0.041 10x20 1820 0.023
10x16 1430 0.038
1200 08x20 1250 0.041 10x20 1820 0.023 10x25 2150 0.022
10x16 1430 0.038
1500 10x20 1820 0.023 10x25 2150 0.022 13x21 2360 0.021
2200 10x25 2150 0.022 13x21 2360 0.021 13x25 2770 0.018
2700 13x30 3140 0.016
16x22 3290 0.018
3300 13x21 2360 0.021 13x25 2770 0.018 13x35 3400 0.015
3900 13x25 2770 0.018 13x30 3290 0.016 16x26 3460 0.016
16x22 3140 0.018
4700 13x30 3290 0.016 13x35 3400 0.015
5600 13x35 3350 0.015 16x26 3460 0.016
16x22 3400 0.018
6800 16x26 3460 0.016
Cap
(μF)
V25 35 50
Item D x L R.C. IMP D x L R.C. IMP D x L R.C. IMP
22 05x11 238 0.340
33 05x11 250 0.300
47 05x11 250 0.300
56 6.3x11.405 0.130 6.3x11.385 0.140
68
100 6.3x11.405 0.130 08x12 724 0.074
120 08x16 950 0.061
150 08x12 760 0.072 10x13 979 0.061
180 08x20 1190 0.046
220 08x12 760 0.072 08x16 995 0.056 10x16 1370 0.042
10x13 1030 0.053
270 08x20 1250 0.041 10x20 1580 0.030
330 08x16 995 0.056 10x16 1430 0.038 10x25 1870 0.028
10x13 1030 0.053
470 08x20 1250 0.041 10x20 1820 0.023 13x21 2050 0.027
10x16 1430 0.038
560 10x25 2150 0.022 13x25 2410 0.023
680 10x20 1820 0.023 13x21 2360 0.021 13x30 2860 0.021
820 10x25 2150 0.022 13x21 2450 0.020 13x35 2960 0.019
16x22 2730 0.023
1000 13x21 2360 0.021 13x25 2770 0.018 16x26 3010 0.021
1200 13x21 2360 0.021 13x30 3140 0.016
16x22 3290 0.018
1500 13x25 2770 0.018 13x35 3400 0.015
1800 13x30 3140 0.016 16x26 3460 0.016
16x22 3290 0.018
2200 13x35 3400 0.015
2700 16x26 3460 0.016
※ 13mm may be replaced by 12.5mm upon customer’s request.
DIMENSIONS(mm)
D×L(mm) ; R.C.(mA rms) at 105℃ 100KHz ; IMP (Ω max)at 20℃ 100KHz.
α(L ＜ 16) 1.0
(L ≧ 16) 2.0
SG
