Frequency Translator / Jitter Attenuator ABFT Pb RoHS Compliant 5.00 x 7.00 x 2.0mm Moisture Sensitivity Level (MSL)-This product is not Moisture Sensitive MSL = N/A: Not Applicable FEATURES: | | | | | | | | | | | | | | APPLICATIONS: * Frequency translation, clock smoothing and jitter attenuation of the input * 5x7x2 mm SMT, RoHS Compliant reflow-able package * Frequency translation to either 20MHz or 40MHz carrier @ +3.3V Supply Voltage 10MHz reference * Datacom - DSLAM, DSLAR, Access Nodes * Industrial operating temperature range (-40C to +85C) * Cable modem head end * LVCMOS Output * Base Station - GSM, CDMA * Internal absolute pull range > 100 ppm allowing for long term drift correction * Telecom - SONET/SDH/ATM GENERAL DESCRIPTION The ABFT series is an Ultra Low Jitter VCXO based frequency translator; ideally suited to improve Jitter characteristics of the input signal. This device is designed to provide input clock smoothing - while providing Phase and Frequency Locked higher frequency translated output. Typical application will take a 10MHz reference frequency and phase & frequency lock it to either a 20MHz or a 40MHz Low Jitter VCXO. The implemented technology significantly attenuates the jitter content of the 10MHz reference signal; while keeping the higher frequency RF Output - Frequency and Phase Coherent with the input 10MHz reference signal. STANDARD SPECIFICATIONS: Parameters Minimum Resonant Frequency Operating Temperature Storage Temperature Supply Voltage (Vdd) -40 -40 3.135 Typical 20.000 Or 40.00 3.3 Maximum Units Notes MHz See options +85 +85 3.465 C C V 10.000200 3.3 50 MHz Vp-p ms +25.00 ppb Input Signal Characteristics Frequency Signal level Lock Time Frequency Stability Over Temperature (Note # 1) Internal Frequency Pull Range 9.999800 0.300 Output Load: Rise Time (Tr) Fall Time (Tf) Symmetry Output Voltage ( VOH) Output Voltage ( VOL) Stand alone Aging (Note # 2) 10.000000 < 20 -25.00 100.00 Supply Current (IDD) RF output Characteristics 45 0.9*Vdd ppm < 14.0 20.00 mA 853 526 48/52 15||10 1200 1200 55 pF||k ps ps % V V 0.1*Vdd -5.0 +5.0 -12.0 +12.0 ppm 3.3V5% Input signal must be with-in 20.00 ppm from 10.00MHz carrier for the ABFT device to achieve lock Referenced to the stable input reference of 10.00MHz (such as a Stratum-III TCXO or an OCXO) This is the internal pull range of the ABFT device providing sufficient correction range to account for internal aging, stand-alone temperature variation, etc. Under Lock @1/2Vdd @+25C First year @+25C After 10 years (Note # 1):The frequency stability over temperature of the ABFT device is greatly dependant on the short term perturbations of the input reference signal. (Note # 2):The Aging characteristics of the Quartz used inside the ABFT solution are such that, the stand-alone aging will not exceed 12.00 ppm over a 10-year product life; referenced to the initial measured frequency post reflow in end application ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE | Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Frequency Translator / Jitter Attenuator ABFT Pb RoHS Compliant 5.00 x 7.00 x 2.0mm | | | | | | | | | | | | | | Parameters Minimum Typical Maximum -56 -87 -113 -135 -151 -155 -156 -157 -130 -145 -150 -150 -155 Units Phase Noise @ 20MHz carrier 1Hz offset from the carrier 10Hz offset from the carrier 100Hz offset from the carrier 1,000Hz offset from the carrier 10,000Hz offset from the carrier 100,000Hz offset from the carrier 1,000,000Hz offset from the carrier 5,000,000Hz offset from the carrier dBc/Hz Notes Close to the carrier phase noise is dependent on the cleanliness of the input reference. However, at 1kHz offset and beyond, ABFT phase noise is practically independent of the input reference noise PHASE NOISE Phase Noise under lock (ABFT-20.00MHz with input connected to a low noise,stable 10.00MHz Stratum-IIIreference signal) DetailedComparative Phase Noise Plot (Stratum-III 10.0MHz as Reference) Stratum-III 10.00MHz low Noise Reference ABFT-20.00MHz Phase Noise under Lock ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Frequency Translator / Jitter Attenuator ABFT Pb RoHS Compliant 5.00 x 7.00 x 2.0mm | | | | | | | | | | | | | | PHASE NOISE Detailed Comparative Phase Noise Plot (10.0MHz Clock Crystal Oscillator as Reference) Detail Comparative Phase Noise Plot (10.0MHz MEMS Oscillator as Reference) 10.00MHz Clock Crystal Oscillator Reference ABFT-20.00MHz Phase Noise under Lock 10.00MHz MEMS Oscillator Reference ABFT-20.00MHz Phase Noise under Lock FREQUENCY TRACKING OVER TEMPERATURE ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Frequency Translator / Jitter Attenuator ABFT Pb RoHS Compliant 5.00 x 7.00 x 2.0mm | | | | | | | | | | | | | | PART IDENTIFICATION ABFT - MHz - Frequency in MHz 20.000 MHz Or 40.000 MHz T T2 = = 1,000 unit Reel (250) unit Reel FREQUENCY TRACKING OVER TEMPERATURE Top View (5.0 0.2) mm (7.0 0.2) mm Side View 2.0 mm Max Dimension : Inches (mm) Bottom View (5.08 0.20) mm Pin #1 PIN # 1 2 3 4 Pin#2 1.1 mm Pin #4 Note:Abracon recommendsa0.01uF bypass capacitor between pin#2 andpin#4 Pin#3 1.4 mm ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Name 10.0MHz Reference Input GND Locked - Output Vdd ALL Dimensions are in (mm) Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Frequency Translator / Jitter Attenuator ABFT Pb RoHS Compliant 5.00 x 7.00 x 2.0mm | | | | | | | | | | | | | | REFLOW PROFILE REFLOW PROFILE T = Tape & Reel { (1,000) units / reel } T2 = Tape & Reel { (250) units / reel } Dimensions: mm ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com |