STK621-140-E - ON SEMICONDUCTOR

CPH3105 / CPH3205

No.6084-1/5

Applications

•DC-DC converters relay drivers, lamp drivers, motor drivers, flash.

Features

•Adoption of FBET, MBIT processes.

•High current capacitance.

•Low collector-to-emitter saturation voltage.

•High-speed switching.

•Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).

•High allowable power dissipation.

( ) : CPH3105

Specifications

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO (--50)100 V

Collector-to-Emitter Voltage VCES (--50)100 V

Collector-to-Emitter Voltage VCEO (--)50 V

Emitter-to-Base Voltage VEBO (--)6 V

Collector Current IC(--)3 A

Collector Current (Pulse) ICP (--)6 A

Base Current IB(--)600 mA

Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 0.9 W

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Electrical Characteristics at Ta=25°C

Ratings

Parameter Symbol Conditions min typ max Unit

Collector Cutoff Current ICBO VCB=(--)40V, IE=0A (--)1 µA

Emitter Cutoff Current IEBO VEB=(--)4V, IC=0A (--)1 µA

DC Current Gain hFE VCE=(--)2V, IC=(--)100mA 200 560

Marking : CPH3105 : AE, CPH3205 : CE Continued on next page.

Ordering number : ENN6084D

62005EA MS IM TB-00001407 / 63004 TS IM TB-00000304 / 41000 TS (KOTO) TA-2926

CPH3105 / CPH3205

PNP / NPN Epitaxial Planar Silicon Transistors

High-Current Switching

Applications

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

CPH3105 / CPH3205

No.6084-2/5

Continued from preceding page. Ratings

Parameter Symbol Conditions min typ max Unit

Gain-Bandwideth Product fTVCE=(--)10V, IC=(--)500mA (360) MHz

380 MHz

Output Capacitance Cob VCB=(--)10V, f=1MHz (24)13 pF

VCE(sat)1 IC=(--)1A, IB=(--)50mA (--100) (--200) mV

Collector-to-Emitter Saturation Voltage 80 120 mV

VCE(sat)2 IC=(--)2A, IB=(--)100mA (--185) (--500) mV

140 210 mV

Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)2A, IB=(--)100mA (--)0.88 (--)1.2 V

Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10µA, IE=0A (--50) V

100 V

Collector-to-Emitter Breakdown Voltage V(BR)CES IC=(--)100µA, RBE=0Ω(--)50 V

100 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(--)1mA, RBE=∞(--)50 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(--)10µA, IC=0A (--)6 V

Turn-ON Time ton See specified test circuit. (30)35 ns

Storage Time tstg See specified test circuit. (230) ns

300 ns

Fall T ime tfSee specified test circuit. (15)22 ns

Package Dimensions Switching Time Test Circuit

unit : mm

7015-003

--0.4

--0.8

--1.2

--1.6

--2.0

IC -- VCE

0 --0.2 --0.4 --0.6 --0.8 --1.0 0.4 0.8 1.2 1.6 2.0

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

5.0

2.5

IC -- VCE

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

4.5

4.0

3.5

3.0

2.0

1.5

1.0

0.5

IT08051 IT08052

CPH3105

IB=0mA IB=0mA

--40mA

--30mA

--20mA

--10mA

--8mA

--6mA

--4mA

--2mA

CPH3205

100mA

80mA

60mA

40mA

20mA

10mA

5mA

2.9

1.9

0.05

0.2

0.7 0.9 2.8

1.6

0.6 0.6

0.2

0.4 0.15

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

50Ω

INPUT OUTPUT

VRRBRL

VCC=25V

100µF 470µF

VBE= --5V

PW=20µsIB1

IB2

DC≤1%

(For PNP, the polarity is reversed.)

10IB1= --10IB2=IC=1A

CPH3105 / CPH3205

No.6084-3/5

100

23 57 23 257

0.01 1.00.1 53

1000

100

Collector Current, IC -- A

hFE -- IC

DC Current Gain, hFE

1000

10 23 57

--0.01 --1.0--0.1 23 57 23

100

Collector Current, IC -- A

fT -- IC

Gain-Bandwidth Product, fT -- MHz

23 57 23 257

--0.01 --1.0--0.1 53

1000

100

Collector Current, IC -- A

hFE -- IC

DC Current Gain, hFE

1000

10 23 57

0.01 1.0

0.1 23 57 23

100

Collector Current, IC -- A

fT -- IC

Gain-Bandwidth Product, fT -- MHz

IT08055

IT08057

IT08056

IT08058

Collector-to-Base Voltage, VCB -- V

Cob -- VCB

Output Capacitance, Cob -- pF

23 57

--1.0 --10 2735 23 57 23 57

0.1 1.0 10 23 57

100

Collector-to-Base Voltage, VCB -- V

Cob -- VCB

Output Capacitance, Cob -- pF

IT08059 IT08060

3.0

2.0

2.5

1.5

1.0

0.5

1.0

1.5

2.0

2.5

3.0

Base-to-Emitter Voltage, VBE -- V

IC -- VBE

Collector Current, IC -- A

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

Base-to-Emitter Voltage, VBE -- V

IC -- VBE

Collector Current, IC -- A

0 0.2 0.4 0.6 1.00.8

CPH3205

VCE=2V

IT08053 IT08054

CPH3105

VCE= --2V

--25°C

Ta=75°C

--25°C

Ta=75

CPH3105

VCE= --2V

--25

Ta=75°C

25°C

CPH3205

VCE=2V

Ta=75°C

--25°C

CPH3105

VCE= --10V

CPH3105

f=1MHz CPH3205

f=1MHz

CPH3205

VCE=10V

CPH3105 / CPH3205

No.6084-4/5

23 57

--0.01 --1.0 --10--0.1 23 57 3 572

--1000

--10000

--100

--10 23 57

0.01 1.00.1 23 57 2 53

1000

100

Collector Current, IC -- A

VCE(sat) -- IC

Collector Current, IC -- A

VBE(sat) -- IC

100 23 57

0.01 1.00.1 23 57 2 53

1000

CPH3205

IC / IB=50

Collector Current, IC -- A

VCE(sat) -- IC

Collector Current, IC -- A

VBE(sat) -- IC

--100 23 57

--0.01 --1.0 --10--0.1 23 57 23 57

23 57

0.1 101.0 23 35572 7

--1000

IT08063

IT08065

IT08064

IT08066

Ambient Temperature, Ta -- °C

PC -- Ta

Collector Dissipation, PC -- W

1.0

0.2

0.4

0.6

0.8

0.9

0 20 40 60 80 100 120 140 160

Collector-to-Emitter Voltage, VCE -- V

A S O

Collector Current, IC -- A

1.0

0.1

0.01

Ta=25°C

Single pulse

Mounted on a ceramic board(600mm

✕0.8mm)

For PNP, minus sign is omitted.

IT08067 IT08068

23 57

0.01 1.00.1 23 57 2 53

1000

100

Collector Current, IC -- A

VCE(sat) -- IC

Collector Current, IC -- A

VCE(sat) -- IC

23 57

--0.01 --1.0 --10--0.1 2 3 57 5723

--10000

--100

--1000

--10

IT08061 IT08062

CPH3105

IC / IB=20

Ta=75°C

--25°C

CPH3205

IC / IB=20

Ta=75°C

--25°C

CPH3105

IC / IB=50

Ta=75

--25°C

Ta=75

--25°C

CPH3105

IC / IB=50

Ta= --25°C

75°C

25°C

CPH3205

IC / IB=50

CPH3105 / CPH3205

100µs

500µs

1ms

10ms

100ms

ICP=6A

IC=3A

DC operation

Mounted on a ceramic board (600mm

✕0.8mm)

CPH3105 / CPH3205

Ta= --25°C

25°C

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

CPH3105 / CPH3205

No.6084-5/5

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of June, 2005. Specifications and information herein are subject

to change without notice.