ER2A-L
THRU
ER2J-L
2 Amp Super Fast
Recovery Rectifier
50 to 600 Volts
Maximum Ratings
• Operating Temperature: -65к to +175 к
• Storage Temperature: -65к to +175к
MCC
Part Number Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS Voltage
Maximum DC
Blocking
Voltage
ER2A-L 50V 35V 50V
ER2B-L 100V 70V 100V
ER2D-L 200V 140V 200V
ER2G-L 400V 280V 400V
ER2J-L 600V 420V 600V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current IF(AV) 2.0A TL= 110 к
Peak Forward Surge
Current IFSM 50A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
ER2A-L-ER2D-L
ER2G-L
ER2J-L
VF.95V
1.25V
1.70V
IFM = 2.0A;
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR5µA
1mATA = 25к
TA = 100к
Maximum Reverse
Recovery Time Trr 35ns IF=0.5A, IR=1.0A,
Irr=0.25A
Typical Junction
Capacitance CJ 15pF Measured at
1.0MHz, VR=4.0V
omponents
20736 Marilla Street Chatsworth

 !"#
$%  !"#
MCC
Revision: E 2013/08/20
TM
Micro Commercial Components
www.mccsemi.com
1 of 3
Features
• Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates
RoHS Compliant. See ordering information)
Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7.
0.060”
0.185
0.121”
SUGGESTED SOLDER
PAD LAYOUT
DO-214AA
(SMB) (LEAD FRAME)
A
B
D
C
E
F
G
H
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .160 .185 4.06 4.70
B .130 .155 3.30 3.94
C .006 .012 0.15 0.31
D..030 .060 0.76 1..52
E .200 .220 5.08 5.59
F .079 .096 2.00 2.44
G .075 .087 1.91 2.21
H .002 .008 0.05 0.203
• Moisture Sensitivity Level 1
• Super fast switching speed under 35ns
• Marking : Cathode band and type number (No '-L' Suffix)
• Built-in strain relief
• Epoxy meets UL 94 V-0 flammability rating
• Halogen free available upon request by adding suffix "-HF"
0.1
1.0
.01
10
50
FIG.1-TYPICAL FORWARD
CHARACTERISTICS
FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT,(A)
FIG.5-TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE,(V)
JUNCTION CAPACITANCE,(pF)
INSTANTANEOUS FORWARD CURRENT,(A)
FORWARD VOLTAGE,(V)
Pulse Width 300us
1% Duty Cycle
0.4
0.8
1.2
1.6
2.0
2.4
35
30
25
20
15
10
5
0
(+)
(+)
25Vdc
(approx.)
( )
( )
PULSE
GENERATOR
(NOTE 2)
OSCILLISCOPE
(NOTE 1)
1
NON-
INDUCTIVE
W
NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF.
2. Rise Time= 10ns max., Source Impedance= 50 ohms.
+0.5A
0
-0.25A
-1.0A
|
|
|
|
|
|
|
|
1cm
SET TIME BASE FOR
50 / 10ns / cm
trr
.01 .05 .1 .5 1 5 10 50 100
D.U.T.
.6 .8 1.0 1.2 1.4 1.6 1.8 2.0
3.0
LEAD TEMPERATURE ( C)
FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTICS
10
NONINDUCTIVE
50
NONINDUCTIVE
W
W
Tj=25 C
FIG.4-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
PEAK FORWAARD SURGE CURRENT,(A)
10
0
20
30
40
50
NUMBER OF CYCLES AT 60Hz
1 105 50 100
ER2A-L~ER2D-L
8.3ms Single Half
Sine Wave
JEDEC method
Single Phase
Half Wave 60Hz
Resistive Or Inductive Load
0 20 40 60 80 100 120 140 160 180 200
0
Tj=25 C
E R
2G-L
ER2J-L
Revision: E 2013/08/20
ER 2 A - L thru ER 2 J - L
MCC
TM
Micro Commercial Components
www.mccsemi.com
2 of 3
MCC
Revision: E 2013/08/20
TM
Micro Commercial Components
www.mccsemi.com
3 of 3
3
Device Packing
ER2A-LTP~ER2J-LTP Tape&Reel: 3Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. ER2A-LTP-HF~ER2J-LTP-HF