A
BCIRH Halo
g
en Free Connectors
The AB Connectors Industrial Range (H - halogen free) is
based on the products covered by the American MilC-
5015 and the German VG95234 specifications. These
connectors are used extensively throughout the mass
transportation, entertainment and general industrial
markets.
ABCIRH connectors are interchangeable with all corre-
sponding types and feature contact arrangements from
Mil-STD-1651. Positive coupling is indicated by an
audible 'snap' and by the alignment of three coloured
dots on the receptacle and on the coupling nut of the plug
connector.
To enhance service life in applications where the con-
nectors are likely to experience severe vibration or
repeated mating, ABCIRH connectors feature stainless
steel anti-wear pins at the critical point of the receptacle
coupling ramps.
In response to safety and environmental requirements,
ABCIRH connectors have as standard, low fire haz-
ard/halogen free rubber insulators which have been
independently tested and shown to conform to the
requirements of French specification NF F 16-101 clas-
sification 12 F1 and to British specification BS 6853
app. A clause A.9 and app. B clause B.5.1. Connector
shells can also be supplied with cadmium free plating
finishes.
Protection against water and dust ingress is provided by
the use of a dynamic seal ring under the coupling nut and
by an individual wire seal grommet at the rear of the
connector. A wavy washer assembly, also under the
coupling nut and a comprehensive range of back shells
and accessories, ensure excellent continuity and
shielding characteristics between mated connectors
where the effects of EMI and RFI must be eliminated.
Catalogue Index
ABCIRH Connectors
General Information............................................................................
Electrical Data ....................................................................................
Part Number Explanation...................................................................
F80 Contact arrangements..................................................................
F80 Contact Arrangement Selection Chart..........................................
Alternative Insert Orientations.............................................................
F80 Crimp Contacts - Pin ...................................................................
F80 Crimp Contacts - Socket..............................................................
F80 Crimp Contacts - Low Insertion Force Socket ..............................
F80 Coaxial Contacts .........................................................................
F80 Twinaxial Contacts ......................................................................
Front Mounting Receptacle - ABCIRH00 ............................................
Cable Mounted Receptacle - ABCIRH01 ............................................
Rear Mounting Receptacle - ABCIRH03 .............................................
Size 49 Front Mounting Receptacle - ABCIRH04 ...............................
Size 49 Rear Mounting Receptacle - ABCIRH05 ................................
Plug - ABCIRH06/SE06 ......................................................................
Plug, Rubber Covered Coupling Nut -ABCIRHP06..............................
Size 49 Plug - ABCIRHP06 ................................................................
Through Bulkhead Receptacle - ABCIRH07 .......................................
Rear Mounting Single Hole Receptacle - ABCIRH09 ..........................
Panel Mounted Plug - ABCIRH12A ....................................................
Conduit Adaptor With Braid Screen Trap - Type RM (CRA) ...............
Non-Locking Cable Clamp - Type D (OCN) ........................................
Non-Locking Grommet Nut - Type EV ................................................
Locking 900 Outlet With Cable Clamp & Bushing - Type F..................
Locking 900 Outlet With Sealed Cable Clamp - Type FC.....................
Locking 900 Outlet - Type FT ..............................................................
Locking 900 Outlet, RFI - Type FM .....................................................
Locking Heatshrink Adaptor - Type G (HSA) ......................................
Locking RFI Shielded Adaptor - Type GM (LHSA) ..............................
Non-Locking Heatshrink Adaptor - Type GS (HSAS) ..........................
Locking Armoured Conduit Adaptor - Type H (ACA) ...........................
Locking Cable Clamp With Bushing - Type HC ..................................
Locking Sealed Cable Clamp - Type HD ............................................
Non-Locking Cable Clamp With Bushing - Type JE ............................
Locking Screened Cable Adaptor - Type M (SCA) ..............................
Non-Locking Conduit Adaptor - Type R (CCA) ...................................
Non-Locking Sealed Cable Clamp - Type RC .....................................
Long Backshell With Cable Clamp & Bushing - Type XLA...................
Long Backshell With Sealed Cable Clamp - Type XLC .......................
Long Backshell With Grommet - Type SHE ........................................
PG Threaded Adaptors (DIN 40430) ..................................................
Cable Clamp - Type MS3057A ...........................................................
Cable Clamp - Type MS3057C ...........................................................
Telescopic Bushing ............................................................................
Panel Sealing Gaskets .......................................................................
Protective Caps .................................................................................
Wire Sealing Grommets .....................................................................
Dummy Pins, Sockets & Grommet Filler Plugs ..................................
Stowage Receptacles .........................................................................
Square Flange Receptacle Nut Plates ................................................
Square Flange Receptacles, Panel Mounting Details .........................
Single Hole Mounting Receptacles, Panel Mounting Details................
Contact Insertion & Extraction Tools ..................................................
Socket Guide Pins .............................................................................
F80 Contacts, Crimp & Tooling Data ..................................................
F80 Coax & Twinax Contacts, Crimp & Tooling Data ...................
Page
2
3
4
5
18
20
22
23
24
25
26
27
31
34
38
39
40
43
46
47
48
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
79
80
81
82
83
84
84
85
87
Standard Data
2
General Information
ABCIRH Connectors
Materials:
Connector metalwork: Aluminium alloy
Insulator, grommet Low Fire Hazard,
& bushing: rubber
Contacts: Copper alloy
Accessory hardware: Aluminium alloy
Standard Plating Finishes:
Aluminium parts: Olive drab chromate
over zinc cobalt or
Olive drab chromate
over cadmium
plate.*
Contacts: Silver or Gold.
* Consult factory for alternative finishes.
Environmental Ratings:
Temperature range: -550C to + 2000C
Shock severity: 75g
Vibration: 5-500 Hz long
endurance.
30 hour test at 10g.
Acceleration: 50g.
Mechanical Features:
Coupling: 3 pin bayonet.
Number of contacts: 2 to 85
Contact termination: Crimp or p.c. tail.
Sealing: Dynamic sealing
ring & individual
wire seal grommet.
When mated and
used with
appropriate sealed
backshell, IP67
rated.
Matings: 2000.
ABCIRH Connectors:
Note.
The company
reserves the right and may change or vary specification
without prior written notice.
ABCIRH connectors feature stainless steel pins
at critical wear points of the cam tracks of all
receptacle shells, to protect from wear inflicted by
continuous mating / de-mating and vibration.
Stainless Steel
Wear Pin
ABCIR H 06 F 28 21 P C N F80 ** **
Material
Variation
Accessory
Type
Contact
Arrangement
Contact
Termination
Contact
Style
Series
Prefix
Shell
Style
Shell
Size
Contact
Type
Insert
Orientation
Modification
Code
Contact
Supply
Part Number Explanation
ABCIRH Connectors
Series: ABCIR
Material H - Low fire hazard
variation:
Shell style: 00 - 4 hole square flange
receptacle, front panel
mounted.
01 - Cable mounted
receptacle.
03 - 4 hole square flange
receptacle, rear panel
mounted.
06 - Plug. No RFI
grounding.
P06 - Plug, rubber covered
coupling nut. No RFI
grounding.
SE06 - Plug with RFI
grounding.
07 - Through bulkhead
receptacle.
08 - Plug with 900 angled
outlet. No RFI
grounding
SE08 - Plug with 900 angled
outlet. RFI grounding.
09 - Single hole mounted
receptacle.
Accessory type: See relevent catalogue
pages.
Shell size: 10SL to 49.
Contact arrangement: See pages 5 to 17.
Contact type: P pin, S socket,
H pin/socket assembly
for bulkhead connector
style 07.
Contact termination: C crimp removeable,
(except for style 07
which are bonded, non-
removeable, no
designation in part
number).
Insert orientation: N normal. WXYZ
alternative insert
positions. See pages
20 & 21.
Contact style: F80
Modification code: Please consult factory.
Contact supply: Silver plated contacts,
no designation.
P3 gold plated.
V0 connector supplied
without contacts.
4
Contact
Arrangement 16-10 20-3 22-2
No. Contacts x
Size AWG (Metric) 3 x #12 (25) 3 x #12 (25) 3 x #8 (100)
Service Rating A D D
F80 Contact Arrangements
A
B
C
5
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
3 Contacts
Contact
Arrangement 10SL-4 14S-9 18-3
No. Contacts x
Size AWG (Metric) 2 x #16S (15S) 2 x #16S (15S) 2 x #12 (25)
Service Rating A A D
2 Contacts
3 Contacts
Contact
Arrangement 10SL-3 14S-7 16S-5
No. Contacts x
Size AWG (Metric) 3 x #16S (15S) 3 x #16S (15S) 3 x #16S (15S)
Service Rating A A A
F80 Contact Arrangements
DA
B
C
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
6
5 Contacts
4 Contacts
Contact
Arrangement 20-4 24-22 32-17
No. Contacts x
Size AWG (Metric) 4 x #12 (25) 4 x #8 (100) 4 x #4 (160)
Service Rating D D D
4 Contacts
Contact
Arrangement 36-5 40-E4 49-A4
No. Contacts x
Size AWG (Metric) 4 x #0 (500) 4 x #0 (500) 4 x #0 (500)
Service Rating A E D
Contact
Arrangement 14S-5 16S-8 18-11 40-A5
No. Contacts x
Size AWG (Metric) 5 x #16S (15S) 5 x #16S (15S) 5 x #12 (25) 5 x#0 (500)
Service Rating Inst. A A A
Contact legend
F80 Contact Arrangements
A
B
C
DE
F
G
H
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
7
6 Contacts
7 Contacts
8 Contacts
A
B
C
D
E
F
Contact
Arrangement 14S-6 18-12 28-22
No. Contacts x
Size AWG (Metric) 6 # 16S (15S) 6 # 16 (15) 3 # 16 (15), 3 # 4 (160)
Service Rating Inst. A D
Contact
Arrangement 16S-1 20-15 24-2 24-10 24-27
No. Contacts x
Size AWG (Metric) 7 # 16S (15S) 7 # 12 (25) 7 # 12 (25) 7 # 8 (100) 7 # 16 (15)
Service Rating A A D A E
Contact
Arrangement 20-7 22-18 22-23
No. Contacts x
Size AWG (Metric) 8 x #16 (15) 8 x #16 (15) 8 x #12 (25)
Service Rating A,B,H,G = D, Balance = A A,B,F,G,H = D, Balance = A H = D, Balance = A
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
8
9 Contacts
9 Contacts
10 Contacts
A
BC
DEF
GH
J
Contact
Arrangement 20-A9 20-16 20-18
No.Contacts x 7 x # 6 (15) 6 x #16 (15)
Size AWG (Metric) 9 x #12 (25) 2 x #12 (25) 3 x #12 (25)
Service Rating J = D. Balance = Inst. A A
Contact
Arrangement 24-11 28-A9
No. Contacts x 6 x #12 (25) 4 x #4 (160)
Size AWG (Metric) 3 x #8 (100) 5 x #16 (15)
Service Rating A A
Contact
Arrangement 18-1 18-19 49-10
No. Contacts x 4 x #12 (25)
Size AWG (Metric) 10 x #16 (15) 10 x #16 (15) 6 x # 0 (500)
Service Rating B,C,F,G = A. Balance = Inst. A D
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
9
11 Contacts
12 Contacts
13 Contacts
Contact
Arrangement 20-33
No. Contacts x
Size AWG (Metric) 11 x #16 (15)
Service Rating A
Contact
Arrangement 49-A12
No. Contacts x 5 x #8 (100)
Size AWG (Metric) 7 x #4 (160)
Service Rating D
Contact
Arrangement 32-A13
No. contacts x
Size AWG (Metric) 13 x #12 (25)
Service Rating D
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
10
14 Contacts
16 Contacts
17 Contacts
Contact
Arrangement 20-27 22-19 28-20
No. Contacts x 4 x #16 (15)
Size AWG (Metric) 14 x #16 (15) 14 x #16 (15) 10 x #12 (25)
Service Rating A A A
Contact
Arrangement 24-7
No. Contacts x 14 x #16 (15)
Size AWG (Metric) 2 x #12 (25)
Service Rating A
Contact
Arrangement 20-29
No. Contacts x
Size AWG (Metric) 17 x #16 (15)
Service Rating A
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
11
19 Contacts
20 Contacts
21 Contacts
Contact
Arrangement 20-A48 22-14 24-67 32-76
No. Contacts x
Size AWG (Metric) 19 x #16 (15) 19 x #16 (15) 19 x #12 (25) 19 x #12 (25)
Service Rating Inst. A A A
Contact
Arrangement 28-16
No. Contacts x
Size AWG (Metric) 20 x #16 (15)
Service Rating A
Contact
Arrangement 40-D21
No. Contacts x 20 x #12 (25)
Size AWG (Metric) 1 x #8 (100)
Service Rating D
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
12
22 Contacts
24 Contacts
25 Contacts
Contact
Arrangement 28-11 36-A22
No. Contacts x 18 # 16 (15)
Size AWG (Metric) 4 # 12 (25) 22 # 12 (25)
Service Rating A D
Contact
Arrangement 24-28
No. Contacts x
Size AWG (Metric) 24 x #16 (15)
Service Rating Inst.
Contact
Arrangement 24-A25
No. Contacts x
Size AWG (Metric) 25 x #16 (15)
Service Rating A
Contact legend
F80 Contact Arrangements
1
23
4567
89 10
11
12 13 14
15
16 17
18
19 20 21
22 23 24 25
26
27 28
29
30 31
32
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
13
26 Contacts
31 Contacts
32 Contacts
Contact
Arrangement 28-12 28-13
No. Contacts x 28-12 Rotated by 1000
Size AWG (Metric) 26 x #16 (15) 26 x #16 (15)
Service Rating A A
Contact
Arrangement 40-A31
No. Contacts x
Size AWG (Metric) 31 x #12 (25)
Service Rating D
Contact
Arrangement 49-D32
No. Contacts x 26 x #12 (25), 2 x #8 (100)
Size AWG (Metric) 4 x Coax
Service Rating D
Contact legend
F80 Contact Arrangements
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
14
35 Contacts
37 Contacts
38 Contacts
Contact
Arrangement 28-15 32-7 40-A35
No. Contacts x
Size AWG (Metric) 35 x #16 (15) 28 x #16 (15), 7 x #12 (25) 35 x #12 (25)
Service Rating A A,B,h & j = Inst. Balance = A D
Contact
Arrangement 28-21
No. Contacts x
Size AWG (Metric) 37 # 16 (15)
Service Rating A
Contact
Arrangement 40-A38
No. Contacts x
Size AWG (Metric) 38 # 12 (25)
Service Rating A
Contact legend
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
F80 Contact Arrangements
15
39 Contacts
47 Contacts
48 Contacts
Contact
Arrangement 36-54 No.
Contacts x
Size AWG (Metric) 31 x #16 (15), 8 x #8 (100)
Service Rating A
Contact
Arrangement 36-7 36-16 36-17
No. Contacts x
Size AWG (Metric) 40 x #16 (15), 7 x #12 (25) 36-7 Rotated by 1000 36-7 Rotated by 2500
Service Rating A A
A
Contact
Arrangement 36-10 36-11 36-12
No. Contacts x
Size AWG (Metric) 48 x #16 (15) 36-10 Rotated by 1000 36-10 Rotated by 2500
Service Rating A A A
Contact legend
Contact
Arrangement 49-A49 49-D1 No.
Contacts x 38 x #16 (15), 4 x #12 (25) 44 # 16 (15)
Size AWG (Metric) 5 x #8 (100), 2 x #4 (160) 5 # 4 (160)
Service Rating D D
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
F80 Contact Arrangements
16
48 Contacts
49 Contacts
54 Contacts
Contact
Arrangement 36-A48
No. Contacts x
Size AWG (Metric) 48 # 16 (15)
Service Rating Inst.
Contact
Arrangement 32-22
No. Contacts x
Size AWG (Metric) 54 x #16 (15)
Service Rating A
Contact legend
15/15S 25 100 160 500
(16/16S) (12) (8) (4) (0)
F80 Contact Arrangements
17
60 Contacts
85 Contacts
55 Contacts
Contact
Arrangement 32-A55
No. Contacts x
Size AWG (Metric) 55 # 16 (15)
Service Rating A
Contact
Arrangement 40-A60
No. Contacts x
Size AWG (Metric) 60 # 16 (15)
Service Rating A
Contact
Arrangement 40-56
No. Contacts x
Size AWG (Metric) 85 # 16 (15)
Service Rating A
Contact legend
*Contact Arrangements/Service Ratings
18-1 Contacts B,C,F,G = A. Balance = Inst. 20-A9 Contact J = D Balance = Inst.
20-7 Contacts C,D,E,F = A Balance = D 22-18 Contacts A,B,F,G,H = D Balance = A
22-23 Contact H = D Balance = A
Selection Chart
F80 Contact Arrangements
18
ANWXYZ25x10A25
A2524
ANWZ19x20A19
6724
Inst.NWXYZ24x10A24
2824
ENWZ7x10A7
2724
DNWXY4x42A4
2224
ANWXYZ3x42A6x20A9
1124
ANWZ7x42A7
1024
ANWXYZ2x20A14x10A16
724
D
NWZ7x20A7
2
24
*A&DNWY8x20A8
2322
ANWXYZ14x10A14
1922
*A&DNWXYZ8x10A8
1822
ANWXYZ19x10A19
1422
DNWXYZ3x42A3
222
InstNXY19x10A19
A4820
ANZ11x10A11
3320
ANWZ17x10A17
2920
ANWXYZ14x10A14
2720
ANWXYZ3x20A6x10A9
1820
ANWXYZ2x20A7x10A9
1620
ANWZ7x20A7
1520
*D&InstNXY9x20A9
A920
*A&DNWXYZ8x10A8
720
DNWXY4x20A4
420
DNWXYZ3x20A3
320
ANXY10x10A10
1918
ANWZ6x10A6
1218
ANXY5x20A5
1118
DNWXYZ2x20A2
318
*A&InstNWXYZ10x10A10
118
ANWXY3x20A3
1016
ANXY5x10A5
816S
ANWXYZ3x10A3
516S
ANWZ7x10A7
116S
ANWXYZ2x10A2
914S
ANWXY3x10A3
714S
Inst.NW6x10A6
614S
Inst.NX5x10A5
514S
AN2x10A2
410SL
AN3x10A3
310SL
Ratin
g
Orientation
(
500
)
(
160
)
(
100
)
(
25
)
(
15/15S
)
Cts.Arr.Size
ServiceShell0481216/16SNo. ofCont.Shell
Amps at 85
0 C
Contact Size AWG(Metric) & Current Rating (Derated)
*Contact Arrangements/Service Ratings
32-7 Contacts A,B,H,J = Inst Balance = A
Selection Chart.
F80 Contact Arrangements
19
DN5xCoax44x10A49
D149
DN2xCoax5x42A4x20A38x10A49
A4949
DN4xCoax2x42A26x20A32
D3249
DN7x75A5x42A12
A1249
DN6x135A4x20A10
A1049
DN4x135A4
A449
DNW1x42A20x20A21
D2140
ENWX4x135A4
E440
ANWXYZ60x10A60
A6040
ANWXYZ38x20A38
A3840
DNWXYZ35x20A35
A3540
DNWXYZ31x20A31
A3140
ANWZ5x135A5
A540
ANWXYZ85x10A85
5640
ANW8x42A31x10A39
5436
InstNW48x10A48
A4836
DNWXYZ22x20A22
A2236
A-7x20A40x10A47
1736
A-7x20A40x10A47
1636
A-48x10A48
1236
A-48x10A48
1136
ANWXYZ48x10A48
1036
ANWXYZ7x20A40x10A47
736
ANXY4x135A4
536
ANWXYZ55x10A55
A5532
DNWXYZ13x20A13
A1332
ANWXYZ19x20A19
7632
ANWXYZ54x10A54
2232
DNWXY4x75A4
1732
*A&InstNWXYZ7x20A28x10A35
732
ANWXYZ4X75A5X10A9
A928
DNWXYZ3x75A3x10A6
2228
ANWXYZ37x10A37
2128
ANWXYZ10x20A4x10A14
2028
ANWXYZ20x10A20
1628
ANWXYZ35x10A35
1528
A
-
26x10A26
1328
ANWXY26x10A26
1228
A
NWXYZ4x20
A
18x10
A
22
1128
RatingOrientation(500)(160)(60/100)(25)(15/15S)Cts.Arr.Size
ServiceShell0481216/16SNo. ofCont.Shell
Amps at 85
0 C
Contact Size AWG(Metric) & Current Rating (Derated)
View on Mating Face of Pin Inserts
280250110800
24-A25
335--800
24-67
280250110800
24-28
280--800
24-27
-250110450
24-22
325250110350
24-11
280--800
24-10
280250110800
24-7
280--800
24-2
-250-350
22-23
280250110800
22-19
280250110800
22-18
280--800
22-14
290215145700
22-2
-28080-0
20-A48
280---0
20-33
280--800
20-29
325250110350
20-27
325250110350
20-18
280250110800
20-16
280--800
20-15
-250110-0
20-A9
280250110800
20-7
-250110450
20-4
290215145700
20-3
-240120-0
18-19
280--800
18-12
-265170-0
18-11
325250110350
18-3
290215145700
18-1
-270180900
16-10
-265170-0
16S-8
290215145700
16S-5
280--800
16S-1
290215145700
14S-9
-270180900
14S-7
---900
14S-6
--110-0
14S-5
----
0
10SL-4
----
0
10SL-3
Z White
Y
Pur
p
le
X
GreenW BlueN Yellow
Angular Displacement Of InsertContact
Arrangement
ZY
XWN
Alternative Insert Orientations
20
View on Mating Face of Pin Inserts
ZY
XWN
Alternative Insert Orientations
----0
49-D1
----0
49-A49
----0
49-D32
----0
49-A12
----0
49-A10
----0
49-A4
---800
40-D21
--110450
40-E4
280250110800
40-A60
32228574370
40-A38
290230130700
40-A35
280250110800
40-A31
270--330
40-A5
288216144720
40-56
---670
36-54
---650
36A48
280250110800
36-A22
----0
36-17
----0
36-16
----0
36-12
----0
36-11
280235125800
36-10
280250110800
36-7
-240120-0
36-5
280250110800
32-A55
295230130650
32-A13
280250110800
32-76
280250110800
32-22
-250110450
32-17
280235125800
32-7
2802602501100
28-A9
290215145700
28-22
280250110800
28-21
280250110800
28-20
280250110800
28-16
280250110800
28-15
----0
28-13
-270180900
28-12
280250110800
28-11
Z White
Y
Pur
p
le
X
GreenW BlueN Yellow
Angular Displacement Of InsertContact
Arrangement
21
For standard gold plating, add P3 to the
end of the part number.
Pin
F80 Crimp Contacts
Metric
Imperial
44,50
1.752
50,00
9,80
0.386
14,35
0.565
15,00
0.591
ABB500KPKF80
(500)
44,50
1.752
35,00
8,00
0.315
11,90
0.468
15,00
0.591
ABB500/350KPKF80
(500/350)
44,50
1.752
25,00
7,00
0.276
10,00
0.394
15,00
0.591
ABB500/250KPKF80
(500/250)
44,50
1.752
16,00
5,70
0.224
9,45
0.372
15,00
0.591
ABB500/160KPKF80
(500/160)
44,50
1.752
53,0
11,50
0.453
14,35
0.565
15,00
0.591
ABB0KPKF80
0
41,25
1.624
16,00
5,70
0.224
9,45
0.372
11,00
0.433
ABB160KPKF80
(160)
41,25
1.624
22,00
7,10
0.280
9,55
0.376
11,00
0.433
ABB4KPKF80
4
41,25
1.624
553
3,30
0.130
5,20
0.205
11,00
0.433
ABB4/10KPKF80
4/10
40,70
1.602
10,00
4,40
0.173
7,00
0.276
7,80
0.307
ABB100KPKF80
(100)
40,70
1.602
6,00
3,40
0.134
5,50
0.217
7,80
0.307
ABB100/60KPKF80
(100/60)
40,70
1.602
9,00
4,55
0.179
6,80
0.268
7,80
0.307
ABB8KPKF80
8
40,70
1.602
5,53
3,30
0.130
5,20
0.205
7,80
0.307
ABB8/10KPKF80
8/10
40,70
1.602
2,50
2,50
0.098
3,80
0.150
7,80
0.307
ABB8/12KPKF80
8/12
40,70
1.602
4,00
2,90
0.114
5,20
0.205
7,80
0.307
ABB8/40KPKF80
8/40 (100/40)
37,50
1.476
4,00
2,70
0.106
4,00
0.157
4,80
0.189
ABB12/40KPKF80
12/40 (25/40)
37,50
1.476
5,53
3,00
0.118
4,40
0.173
4,80
0.189
ABB1210KPKF80
12/10
37,50
1.476
2,50/3,00
2,50
0.098
3,80
0.150
4,80
0.189
ABB12KPKF80
12 (25)
37,50
1.476
1,94/2,08
1,80
0.071
2,90
0.114
4,80
0.189
ABB12/14KPKF80
12/14
37,50
1.476
0,93/1,50
1,75
0.069
2,75
0.108
4,80
0.189
ABB12/16KPKF80
12/16 (25/15)
37,50
1.476
0,75/0,93
1,25
0.049
2,30
0.091
4,80
0.189
ABB12/18KPKF80
12/18
37,50
1.476
0,50/0,75
1,10
0.043
2,65
0.104
4,80
0.189
ABB12/20KPKF80
12/20
31,75
1.250
2,50/3,00
2,50
0.098
3,80
0.150
3,20
0.126
ABB16/12KPKF80
16/12
31,75
1,250
1,94/2,08
1,80
0.071
2,90
0.114
3,20
0.126
ABB1614KPKF80
16/14
31,75
1.250
0,93/1,50
1,75
0.069
2,75
0.108
3,20
0.126
ABB16KPKF80
16 (15)
31,75
1.250
0,75/0,93
1,25
0.049
2,30
0.091
3,20
0.126
ABB16/18KPKF80
16/18
31,75
1.250
0,50/0,75
1,10
0.043
2,65
0.104
3,20
0.126
ABB16/20KPKF80
16/20
31,75
1.250
0,22/0,34
0,90
0.035
2,30
0.091
3,20
0.126
ABB16/22KPKF80
16/22
26,60
1.047
1,94/2,08
1,80
0.071
2,90
0.114
3,20
0.126
ABB16S/14KPKF80
16S/14
26,60
1.047
0,93/1,50
1,75
0.069
2,75
0.108
3,20
0.126
ABB16SKPKF80
16S (15S)
26,60
1.047
0,75/0,93
1,25
0.049
2,30
0.091
3,20
0.126
ABB16S/18KPKF80
16S/18
26,60
1.047
0,50/0,75
1,10
0.043
2,65
0.104
3,20
0.126
ABB16S/20KPKF80
16S/20
L
Conductor
CSA mm2
CBAPart Number
Contact Size
AWG (Metric)
22
For standard gold plating, add P3 to the
end of the part number.
Socket
F80 Crimp Contacts
Metric
Imperial
44,50
1.752
50,00
9.80
0.386
14,35
0.565
13,20
0.520
15,10
0.594
ABB500KPKF80(500)
44,50
1.752
35,00
8,00
0.315
11,90
0.469
13,20
0.520
15,10
0.594
ABB500/350KPKF80(500/350)
44,50
1.752
25,00
7,00
0.276
10,00
0.394
13,20
0.520
15,10
0.594
ABB500/250KSKF80(500/250)
44,50
1.752
16,00
5,70
0.224
9,45
0.372
13,20
0.520
15,10
0.594
ABB500/160KSKF80(500/160)
44,50
1.752
53,00
11,50
0.453
14,35
0.565
13,20
0.520
15,10
0.594
ABB0KSKF80
0
41,25
1.624
16,00
5,70
0.224
9,45
0.372
8,60
0.339
11,10
0.437
ABB160KSKF80(160)
41,25
1.624
22,00
7,10
0.280
9,55
0.376
8,60
0.339
11,10
0.437
ABB4KSKF80
4
41,25
1.624
5,53
3,30
0.130
5,20
0.205
6,50
0.256
11,10
0.437
ABB4/10KSKF80
4/10
40,70
1.602
10,00
4,40
0.173
7,00
0.276
6,50
0.256
7,80
0.307
ABB100KSKF80(100)
40,70
1.602
6,00
3,40
0.134
5,50
0.217
6,50
0.256
7,80
0.307
ABB100/60KSKF80(100/60)
40,70
1.602
9,00
4,55
0.179
6,80
0.268
6,50
0.256
7,80
0.307
ABB8KSKF80
8
40,70
1.602
5,53
3,00
0.118
4,40
0.173
6,50
0.256
7,80
0.307
ABB8/10KSKF80
8/10
40,70
1.602
2,50/3,00
2,50
0.098
3,80
0.150
4,80
0.189
7,80
0.307
ABB8/12KSKF80
8/12
40,70
1.602
4,00
2,90
0.114
5,20
0.204
6,50
0.256
7,80
0.307
ABB8/40KSKF80
8/40
37,50
1.476
4,00
2,70
0.106
4,00
0.157
-
4,80
0.189
ABB12/40KSKF80
12/40 (25/40)
37,50
1.476
5,53
3,00
0.118
4,40
0.173
-
480
0.189
ABB1210KSKF80
12/10
37,50
1.476
2,50/3,00
2,50
0.098
3,80
0.150
-
4,80
0.189
ABB12KSKF80
12 (25)
37,50
1.476
1,94/2,08
1,80
0.071
2,90
0.114
-
4,80
0.189
ABB12/14KSKF80
12/14
37,50
1.476
0,93/1,50
1,75
0.069
2,75
0.108
-
4,80
0.189
ABB12/16KSKF80
12/16 (25/15)
37,50
1.476
0,75/0,93
1,25
0.049
2,30
0.091
-
4,80
0.189
ABB12/18KSKF80
12/18
37,50
1.476
0,50/0,75
1,10
0.049
2,65
0.104
-
4,80
0.189
ABB12/20KSKF80
12/20
36,50
1.476
2,50/3,00
2,50
0.098
3,80
0.150
-
3,20
0.126
ABB16/12KSKF80
16/12
36,50
1.437
1,94/2,08
1,80
0.071
2,90
0.114
-
3,20
0.126
ABB16/14KSKF80
16/14
36,50
1.437
0,93/1,50
1,75
0.07
2,75
0.108
-
3,20
0.126
ABB16KSKF80
16 (15)
36,50
1.437
0,75/0,93
1,25
0.049
2,30
0.091
-
3,20
0.126
ABB16/18KSKF80
16/18
36,50
1.437
0,50/0,75
1,10
0.049
2,65
0.104
-
3,20
0.126
ABB16/20KSKF80
16/20
36,50
1.437
0,22/0,34
0,90
0.035
2,30
0.091
-
3,20
0.126
ABB16/22KSKF80
16/22
26,60
1.047
1,94/2,08
1,80
0.071
3,90
0.114
-
3,20
0.126
ABB16S/14KSKF80
16S/14
26,60
1.047
0,93/1,50
1,75
0.069
2,75
0.108
-
3,20
0.126
ABB16SKSKF80
16S (15S)
26,60
1..047
0,75/0.93
1,25
0.069
2,30
0.091
-
3,20
0.126
ABB16S/18KSKF80
16S/18
26,60
1.047
0,50/0,75
1,10
0.049
2,65
0.104
-
3,20
0.126
ABB16S/20KSKF80
16S/20
L
Conductor
CSA mm2
DCBAPart Number
Contact Size
AWG (Metric)
23
Standard Finish = gold plated.
Low Insertion Force Socket
F80 Crimp Contacts
37,50
1.476
2,50/3,00
2,50
0.098
3,80
0.150
4,80
0.189
ABB12KLKF80P3
12
(25)
37,50
1.476
1,00/1,50
1,75
0.069
2,75
0.108
4,80
0.189
ABB12/16KLKF80P3
12/16
(25/15)
37,50
1.476
0,50/0,75
1,10
0.043
2,65
0.104
4,80
0.189
ABB12/20KLKF80P3
12/20
36,50
1.437
1,00/1,50
1,75
0.069
2,75
0.108
3,20
0.126
ABB16KLKF80P3
16
(15)
36,50
1.437
0,50/0,75
1,10
0.043
2,65
0.104
3,20
0.126
ABB16/20KLKF80P3
16/20
26,60
1.047
1,00/1,50
1,75
0.069
2,75
0.108
3,20
0.126
ABB16SKLKF80P3
16S
(15S)
L
Conductor
CSA mm2
CBA
Part
Number
Contact Size
AWG (Metric)
Metric
Imperial
24
* Important Note.
Consult factory for suitable contact arrangement details
* Important Note.
Consult factory for suitable contact arrangement details
Coaxial Pin & Socket
F80 Crimp Contacts
Metric
Imperial
1.0 mm2
44,70
1.760
1,75
0.069
7,50
0.295
9,80
0.386
11,10
0.437
ABB 4 CKPK F80 P1 0024
0.5 mm2
44,70
1.760
1,07
0.042
5,20
0.205
9,80
0.386
11,10
0.437
ABB 4 CKPK F80 P1 0014
Use With
Conductors
LDCBAPart NumberContact Size
AWG *
Metric
Imperial
1.0 mm2
43,05
1.695
1,75
0.069
7,50
0.295
9,80
0.386
11,10
0.437
ABB 4 CKSK F80 P1 0024
0.5 mm2
43,05
1.695
1,07
0.042
5,20
0.205
9,80
0.386
11,10
0.437
ABB 4 CKSK F80 P1 0014
Use With
Conductors
LDCBAPart NumberContact Size
AWG *
Pin Contact
Socket Contact
25
* Important Note.
Consult factory for suitable contact arrangement details
* Important Note.
Consult factory for suitable contact arrangement details
Twinaxial Pin & Socket
F80 Crim
p
Contacts
Metric
Imperial
0.75 mm2
1.0 mm2
44,70
1.760
1,30
0.051
1,30
0.051
6,50
0.256
9,80
0.386
11,10
0.437
ABB 4 TKPK F80 P1 0014
0.5 mm2
0.6 mm2
44,70
1.760
1,05
0.041
1,07
0.042
6,00
0.236
9,80
0.386
11,10
0.437
ABB 4 TKPK F80 P1 4
Use With
Conductors
LEDCBAPart NumberContact Size
AWG *
Metric
Imperial
0.75 mm2
1.0 mm2
43,05
1.695
1,30
0.051
1,30
0.051
6,50
0.256
9,80
0.386
11,10
0.437
ABB 4 TKSK F80 P1 0014
0.5 mm2
0.6 mm2
43,05
1.695
1,05
0.041
1,07
0.042
6,00
0.236
9,80
0.386
11,10
0.437
ABB 4 TKSK F80 P1 4
Use With
Conductors
L
E
DCBAPart NumberContact Size
AWG*
Pin Contact
Socket Contact
26
Style: ABCIRH00A/ABCIRH00A...M6
Front Mounting (No Accessory Thread)
Square Flange Receptacle
Metric
Imperial
15,75
0.620
32,85
1.293
59,00
2.323
4,20
0.165
M5
0,8-6H
4,30
0.169
70,20
2.764
26,80
1.055
40
15,75
0.620
32,85
1.293
52,60
2.071
4,20
0.165
M5
0,8-6H
4,30
0.169
63,80
2.512
26,80
1.055
36
15,75
0.620
32,85
1.293
47,80
1.882
4,20
0.165
M5
0,8-6H
4,30
0.169
57,30
2.256
26,80
1.055
32
15,75
0.620
32,85
1.293
41,40
1.630
4,20
0.165
M5
0,8-6H
3,70
0.146
51,10
2.012
25,20
0.992
28
15,75
0.620
32,85
1.293
35,00
1.378
4,20
0.165
M4
0,7-6H
3,70
0.146
44,80
1.764
25,20
0.992
24
15,75
0.620
32,85
1.293
31,90
1.256
4,20
0.165
M4
0,7-6H
3,20
0.126
41,30
1.626
23,60
0.929
22
15,85
0.624
32,85
1.293
29,00
1.142
4,20
0.165
M4
0,7-6H
3,20
0.126
38,30
1.508
23,60
0.929
20
15,85
0.624
32,85
1.293
25,60
1.008
4,20
0.165
M4
0,7-6H
3,20
0.126
35,30
1.390
23,60
0.929
18
15,85
0.624
32,85
1.293
22,40
0.882
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
22,80
0.898
16
11,10
0.437
25,00
0.98
22,40
0.882
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
18,00
0.709
16S
11,10
0.437
25,00
0.98
19,20
0.756
3,40
0.134
M4
0,7-6H
3,20
0.126
30,30
1.193
18,00
0.709
14S
11,10
0.437
25,00
0.98
16,10
0.634
3,00
0.118
M4
0,7-6H
3,20
0.126
25,70
1.012
17,60
0.693
10SL
Om Min
Overlap
Mated
H
Max
M
Max
E
Max
d2
Thread
d1
+0,2 -0
+0.008-0
C
Max
B
Max
Shell
Size
See page 82 for panel
mounting details
27
Style: ABCIRH00T/ABCIRH00T...M6
Front Mounting (With Accessory Thread)
Square Flange Receptacle
15,75
0.620
3,30
0.130
36,30
1.429
25/16” x 16 UN
4,20
0.165
M5
0,8-6H
4,30
0.169
70,20
2.764
26,80
1.055
40
15,75
0.620
3,30
0.130
36,30
1.429
21/16” x 16 UNS
4,20
0.165
M5
0,8-6H
4,30
0.169
63,80
2.512
26,80
1.055
36
15,75
0.620
3,30
0.130
36,30
1.429
17/8” x 16 UN
4,20
0.165
M5
0,8-6H
4,30
0.169
57,30
2.256
26,80
1.055
32
15,75
0.620
3,30
0.130
36,30
1.429
15/8” x 18 UNEF
4,20
0.165
M5
0,8-6H
3,70
0.146
51,10
2.012
25,20
0.992
28
15,75
0.620
3,30
0.130
36,30
1.429
13/8” x 18 UNEF
4,20
0.165
M4
0,7-6H
3,70
0.146
44,80
1.764
25,20
0.992
24
15,75
0.620
3,30
0.130
36,30
1.429
11/4” x 18 UNEF
4,20
0.165
M4
0,7-6H
3,20
0.126
41,30
1.626
23,60
0.929
22
15,85
0.624
3,30
0.130
36,30
1.429
11/8” x 18 UNEF
4,20
0.165
M4
0,7-6H
3,20
0.126
38,30
1.508
23,60
0.929
20
15,85
0.624
3,30
0.130
36,30
1.429
1” x 20 UNEF
4,20
0.165
M4
0,7-6H
3,20
0.126
35,30
1.390
23,60
0.929
18
15,85
0.624
3,30
0.130
36,30
1.429
7/8” x 20 UNEF
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
22,80
0.898
16
11,10
0.437
3,30
0.130
28,78
1.133
7/8” x 20 UNEF
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
18,00
0.709
16S
11,10
0.437
3,30
0.130
28,78
1.133
3/4” x 20 UNEF
3,40
0.134
M4
0,7-6H
3,20
0.126
30,30
1.193
18,00
0.709
14S
11,10
0.437
3,30
0.130
28,78
1.133
5/8” x 24 UNEF
3,00
0.118
M4
0,7-6H
3,20
0.126
25,70
1.012
17,60
0.693
10SL
Om Min
Overlap
Mated
PH
Max
F
Thread Dia.
Class 2A
E
Max
d2
Thread
d1
+0,2 -0
+0.008-0
C
Max
B
Max
Shell
Size
Metric
Imperial
See page 82 for panel
mounting details
28
* Please consult factory for availability.
80,00
3.189
68,00
2.677
68,00
2.677
107,00
4.213
107,00
4.213
112,00
4.409
111,00
4.370
54,00
2.126
N/A
40
80,00
3.189
68,00
2.677
67,00
2.638
101,00
3.976
101,00
3.976
105,00
4.134
104,00
4.094
54,00
2.126
112,00
4.409
36
80,00
3.189
67,00
2.638
61,00
2.402
95,00
3.740
95,00
3.740
101,00
3.976
98,00
3.858
54,00
2.126
115,00
4.528
32
81,00
3.189
67,00
2.638
63,00
2.480
85,00
3.346
85,00
3.346
89,00
3.504
88,00
3.465
54,00
2.126
119,00
4.685
28
80,00
3.150
68,00
2.677
60,00
2.362
85,00
3.346
85,00
3.346
89,00
3.504
89,00
3.504
54,00
2.126
109,00
4.291
24
80,00
3.150
68,00
2.677
63,00
2.480
77,00
3.031
77,00
3.031
82,00
3.228
81,00
2.189
54,00
2.126
114,00
4.488
22
80,00
3.150
68,00
2.677
60,00
2.362
77,00
3.031
77,00
3.031
82,00
3.228
81,00
3.189
54,00
2.126
114,00
4.488
20
74,00
2.913
65,00
2.559
59,00
2.323
72,00
2.835
72,00
2.835
76,00
2.992
76,00
2.992
54,00
2.126
115,00
4.528
18
*
65,00
2.559
57,00
2.244
67,00
2.638
67,00
2.638
71,00
2.795
71,00
2.795
54,00
2.126
111,00
4.370
16
*
53,00
2.087
49,00
1.929
60,00
2.362
60,00
2.362
64,00
2.520
64,00
2.520
44,00
1.732
104,00
4.094
16S
*
53,00
2.087
49,00
1.929
56,00
2.205
56,00
2.205
60,00
2.362
61,00
2.402
44,00
1.732
107,00
4.213
14S
*
53,00
2.087
49,00
1.929
54,00
2.126
54,00
2.126
58,00
2.283
57,00
2.244
44,00
1.732
109,00
4.291
10SL
JH
G
FED
C
BAShell
Size
Connector & Accessor
y
ABCIRH ‘00’ Style
29
Metric
Imperial
144,00
5.669
140,00
5.512
112,00
4.409
70,00
2.756
65,00
2.559
114,00
4.488
107,00
4.213
103,00
4.055
58,00
2.283
40
144,00
5.669
143,00
5.630
117,00
4.606
69,00
2.716
65,00
2.559
117,00
4.606
107,00
4.213
106,00
4.173
58,00
2.283
36
137,00
5.394
146,00
5.748
111,00
4.370
69,00
2.716
65,00
2.559
120,00
4.724
100,00
3.937
106,00
4.173
58,00
2.283
32
131,00
5.157
149,00
5.866
106,00
4.173
70,00
2.756
65,00
2.559
124,00
4.882
95,00
3.740
107,00
4.213
59,00
2.323
28
124,00
4.882
142,00
5.591
105,00
4.134
69,00
2.716
66,00
2.598
123,00
4.843
95,00
3.740
107,00
4.213
59,00
2.323
24
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
22
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
20
121,00
4.764
148,00
5.827
99,00
3.898
66,00
2.598
66,00
2.598
126,00
4.961
92,00
3.622
124,00
4.882
59,00
2.323
18
121,00
4.764
152,00
5.984
91,00
3.583
60,00
2.362
63,00
2.480
124,00
4.882
88,00
3.465
123,00
4.843
57,00
2.244
16
101,00
3.976
134,00
5.276
82,00
3.228
51,00
2.008
56,00
2.205
115,00
4.528
81,00
3.189
120,00
4.724
50,00
1.969
16S
101,00
3.976
137,00
5.394
82,00
3.228
51,00
2.008
56,00
2.205
118,00
4.646
81,00
3.189
118,00
4.646
50,00
1.969
14S
101,00
3.976
140,00
5.512
82,00
3.228
51,00
2.008
53,00
2.087
121,00
4.764
81,00
3.189
122,00
4.803
50,00
1.696
10SL
UT
S
RPN
M
LKShell
Size
Connector & Accessory cont.
ABCIRH ‘00’ St
y
le
Metric
Imperial
30
15,75
0.620
36,30
1.429
25/16” x 16 UN
4,20
0.165
66,70
2.626
70,00
2.756
26,80
1.055
40
15,75
0.620
36,30
1.429
21/16” x 16 UNS
4,20
0.165
60,80
2.394
63,80
2.512
26,80
1.055
36
15,75
0.620
36,30
1.429
17/8” x 16 UN
4,20
0.165
54,20
2.134
57,10
2.248
26,80
1.055
32
15,75
0.620
36,30
1.429
15/8” x 18 UNEF
4,20
0.165
47,80
1.882
50,90
2.004
25,20
0.992
28
15,75
0.620
36,30
1.429
13/8” x 18 UNEF
4,20
0.165
41,50
1.634
44,60
1.756
25,20
0.992
24
15,75
0.620
36,30
1.429
11/4” x 18 UNEF
4,20
0.165
38,30
1.508
41,10
1.618
23,60
0.929
22
15,85
0.624
36,30
1.429
11/8” x 18 UNEF
4,20
0.165
35,10
1.382
37,80
1.488
23,60
0.929
20
15,85
0.624
36,30
1.429
1” x 20 UNEF
4,20
0.165
31,90
1.256
34,80
1.370
23,60
0.929
18
15,85
0.624
36,30
1.429
7/8” x 20 UNEF
3,40
0.134
28,80
1.134
32,30
1.272
22,80
0.898
16
11,10
0.437
28,78
1.133
7/8” x 20 UNEF
3,40
0.134
28,80
1.134
32,30
1.272
18,00
0.709
16S
11,10
0.437
28,78
1.133
3/4” x 20 UNEF
3,40
0.134
25,60
1.008
29,80
1.173
18,00
0.709
14S
11,10
0.437
28,78
1.133
5/8” x 24 UNEF
3,00
0.118
20,80
0.819
25,20
0.992
17,60
0.693
10SL
Om Min
Overlap
Mated
H
Max
F
Thread Dia.
Class 2A
E
Max
D
Max
C
Max
B
Max
Shell
Size
Style: ABCIRH01T
Cable Mounted Receptacle
Metric
Imperial
31
* Please consult factory for availability.
Connector & Accessor
y
ABCIRH ‘01’ St
y
le
114,00
4.488
107,00
4.213
103,00
4.055
58,00
2.283
80,00
3.189
68,00
2.677
68,00
2.677
54,00
2.126
N/A
40
117,00
4.606
107,00
4.213
106,00
4.173
58,00
2.283
80,00
3.189
68,00
2.677
67,00
2.638
54,00
2.126
112,00
4.409
36
120,00
4.724
100,00
3.937
106,00
4.173
58,00
2.283
80,00
3.189
67,00
2.638
61,00
2.402
54,00
2.126
115,00
4.528
32
124,00
4.882
95,00
3.740
107,00
4.213
59,00
2.323
81,00
3.189
67,00
2.638
63,00
2.480
54,00
2.126
119,00
4.685
28
123,00
4.843
95,00
3.740
107,00
4.213
59,00
2.323
80,00
3.150
68,00
2.677
60,00
2.362
54,00
2.126
109,00
4.291
24
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
80,00
3.150
68,00
2.677
63,00
2.480
54,00
2.126
114,00
4.488
22
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
80,00
3.150
68,00
2.677
60,00
2.362
54,00
2.126
114,00
4.488
20
126,00
4.961
92,00
3.622
124,00
4.882
59,00
2.323
74,00
2.913
65,00
2.559
59,00
2.323
54,00
2.126
115,00
4.528
18
124,00
4.882
88,00
3.465
123,00
4.843
57,00
2.244
*
65,00
2.559
57,00
2.244
54,00
2.126
111,00
4.370
16
115,00
4.528
81,00
3.189
120,00
4.724
50,00
1.969
*
53,00
2.087
49,00
1.929
44,00
1.732
104,00
4.094
16S
118,00
4.646
81,00
3.189
118,00
4.646
50,00
1.969
*
53,00
2.087
49,00
1.929
44,00
1.732
107,00
4.213
14S
121,00
4.764
81,00
3.189
122,00
4.803
50,00
1.696
*
53,00
2.087
49,00
1.929
44,00
1.732
109,00
4.291
10SL
NM
L
KJH
G
BAShell
Size
Metric
Imperial
32
Connector & Accessory cont.
ABCIRH ‘01’ Style
144,00
5.669
140,00
5.512
112,00
4.409
70,00
2.756
65,00
2.559
40
144,00
5.669
143,00
5.630
117,00
4.606
69,00
2.716
65,00
2.559
36
137,00
5.394
146,00
5.748
111,00
4.370
69,00
2.716
65,00
2.559
32
131,00
5.157
149,00
5.866
106,00
4.173
70,00
2.756
65,00
2.559
28
124,00
4.882
142,00
5.591
105,00
4.134
69,00
2.716
66,00
2.598
24
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
22
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
20
121,00
4.764
148,00
5.827
99,00
3.898
66,00
2.598
66,00
2.598
18
121,00
4.764
152,00
5.984
91,00
3.583
60,00
2.362
63,00
2.480
16
101,00
3.976
134,00
5.276
82,00
3.228
51,00
2.008
56,00
2.205
16S
101,00
3.976
137,00
5.394
82,00
3.228
51,00
2.008
56,00
2.205
14S
101,00
3.976
140,00
5.512
82,00
3.228
51,00
2.008
53,00
2.087
10SL
UT
S
RPShell
Size
Metric
Imperial
33
15,75
0.620
3,30
0.130
36,80
1.45
59,00
2.323
4,20
0.165
M5
0,8-6H
4,30
0.169
70,20
2.764
24,45
0.963
40
15,75
0.620
3,30
0.130
36,80
1.45
52,60
2.071
4,20
0.165
M5
0,8-6H
4,30
0.169
63,80
2.512
24,45
0.963
36
15,75
0.620
3,30
0.130
36,80
1.45
47,80
1.882
4,20
0.165
M5
0,8-6H
4,30
0.169
57,30
2.256
24,45
0.963
32
15,75
0.620
3,30
0.130
35,80
1.41
41,40
1.630
4,20
0.165
M5
0,8-6H
3,70
0.146
51,10
2.012
24,45
0.963
28
15,75
0.620
3,30
0.130
32,75
1.29
35,00
1.380
4,20
0.165
M4
0,7-6H
3,70
0.146
44,80
1.764
23,45
0.923
24
15,75
0.620
3,30
0.130
33,40
1.32
31,90
1.250
4,20
0.165
M4
0,7-6H
3,20
0.126
41,30
1.626
23,45
0.923
22
15,85
0.624
3,30
0.130
33,40
1.32
29,00
1.142
4,20
0.165
M4
0,7-6H
3,20
0.126
38,30
1.508
23,45
0.923
20
15,85
0.624
3,30
0.130
32,70
1.28
25,60
1.008
4,20
0.165
M4
0,7-6H
3,20
0.126
35,30
1.390
23,45
0.923
18
15,85
0.624
3,30
0.130
32,70
1.28
22,40
0.882
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
21,90
0.862
16
11,10
0.437
3,30
0.130
25,00
0.99
22,40
0.882
3,40
0.134
M4
0,7-6H
3,20
0.126
32,80
1.291
18,60
0.732
16S
11,10
0.437
3,30
0.130
25,00
0.99
19,20
0.756
3,40
0.134
M4
0,7-6H
3,20
0.126
30,30
1.193
18,60
0.732
14S
11,10
0.437
3,30
0.130
25,00
0.99
16,10
0.634
3,00
0.118
M4
0,7-6H
3,20
0.126
25,70
1.012
18,60
0.732
10SL
Om Min
Overlap
Mated
P
See Note
H
Max
M
Max
E
Max
d2
Thread
d1
+0,2 -0
+0.008-0
C
Max
B
Max
Shell
Size
Note. Maximum panel thickness when using cap head screws.
When using countersunk screws, maximum panel
thickness = 7.5 mm.
See page 82 for panel mounting details.
Style: ABCIRH03A/ABCIRH03A...M6
Rear Mounting (No Accessory Thread)
Square Flange Receptacle
Metric
Imperial
34
AB Style: ABCIRH03T/ABCIRH03T...M6
Rear Mounting (With Accessory Thread)
Square Flange Receptacle
15,75
0.620
3,30
0.130
38,0
1.50
25/16” x 16 UN
4,20
0.165
M5
0.8-6H
4,30
0.169
70,20
2.764
24,45
0.963
40
15,75
0.620
3,30
0.130
37,0
1.46
21/16” x 16 UNS
4,20
0.165
M5
0.8-6H
4,30
0.169
63,80
2.512
24,45
0.963
36
15,75
0.620
3,30
0.130
37,0
1.46
17/8” x 16 UN
4,20
0.165
M5
0.8-6H
4,30
0.169
57,30
2.256
24,45
0.963
32
15,75
0.620
3,30
0.130
37,0
1.46
15/8” x 18 UNEF
4,20
0.165
M5
0.8-6H
3,70
0.146
51,10
2.012
24,45
0.963
28
15,75
0.620
3,30
0.130
37,0
1.46
13/8” x 18 UNEF
4,20
0.165
M4
0.7-6H
3,70
0.146
44,80
1.764
23,45
0.923
24
15,75
0.620
3,30
0.130
37,0
1.46
11/4” x 18 UNEF
4,20
0.165
M4
0.7-6H
3,20
0.126
41,30
1.626
23,45
0.923
22
15,85
0.624
3,30
0.130
37,0
1.46
11/8” x 18 UNEF
4,20
0.165
M4
0.7-6H
3,20
0.126
38,30
1.508
23,45
0.923
20
15,85
0.624
3,30
0.130
37,0
1.46
1” x 20 UNEF
4,20
0.165
M4
0.7-6H
3,20
0.126
35,30
1.390
23,45
0.923
18
15,85
0.624
3,30
0.130
37,0
1.46
7/8” x 20 UNEF
3,40
0.134
M4
0.7-6H
3,20
0.126
32,80
1.291
21,90
0.862
16
11,10
0.437
3,30
0.130
30,0
1.19
7/8” x 20 UNEF
3,40
0.134
M4
0.7-6H
3,20
0.126
32,80
1.291
18,60
0.732
16S
11,10
0.437
3,30
0.130
30,0
1.19
3/4” x 20 UNEF
3,40
0.134
M4
0.7-6H
3,20
0.126
30,30
1.193
18,60
0.732
14S
11,10
0.437
3,30
0.130
30,0
1.19
5/8” x 24 UNEF
3,00
0.118
M4
0.7-6H
3,20
0.126
25,70
1.012
18,60
0.732
10SL
Om Min
Overlap
Mated
P
See Note
H
Max
F
Thread Dia.
Class 2A
E
Max
d2
Thread
d1
+0,2 -0
+0.008-0
C
Max
B
Max
Shell
Size
Note. Maximum panel thickness when using cap head screws.
When using countersunk screws, maximum panel
thickness = 7.5 mm.
See page 82 for panel mounting details.
Metric
Imperial
35
* Please consult factory for availability.
Connector & Accessor
y
ABCIRH ‘03’ Style
88,00
3.465
74,00
2.913
74,00
2.913
113,00
4.449
113,00
4.449
117,00
4.606
117,00
4.606
60,00
2.362
NA
40
88,00
3.465
74,00
2.913
72,00
2.835
106,00
4.173
106,00
4.173
111,00
4.370
110,00
4.331
60,00
2.362
118,00
4.646
36
86,00
3.386
73,00
2.874
67,00
2.638
100,00
3.937
100,00
3.937
107,00
4.213
104,00
4.094
60,00
2.362
121,00
4.764
32
87,00
3.425
73,00
2.874
68,00
2.677
90,00
3.543
90,00
3.543
94,00
3.700
94,00
3.700
60,00
2.362
124,00
4.882
28
86,00
3.386
74,00
2.913
66,00
2.598
91,00
3.583
91,00
3.583
95,00
3.740
95,00
3.740
60,00
2.362
114,00
4.488
24
86,00
3.386
74,00
2.913
68,00
2.677
83,00
3.268
83,00
3.268
88,00
3.465
87,00
3.425
60,00
2.362
120,00
4.724
22
86,00
3.386
74,00
2.913
66,00
2.598
83,00
3.268
83,00
3.268
88,00
3.465
87,00
3.425
60,00
2.362
120,00
4.724
20
80,00
3.150
70,00
2.756
65,00
2.559
78,00
3.071
78,00
3.071
82,00
3.228
82,00
3.228
60,00
2.362
121,00
4.764
18
*
70,00
2.756
63,00
2.480
73,00
2.874
73,00
2.874
77,00
3.031
77,00
3.031
60,00
2.362
117,00
4.606
16
*
54,00
2.126
50,00
1.968
61,00
2.402
61,00
2.402
65,00
2.559
65,00
2.559
44,00
1.732
105,00
4.134
16S
*
54,00
2.126
50,00
1.968
57,00
2.244
57,00
2.244
61,00
2.402
61,00
2.402
44,00
1.732
108,00
4.252
14S
*
54,00
2.126
50,00
1.968
55,00
2.165
55,00
2.165
58,00
2.283
58,00
2.283
44,00
1.732
109,00
4.291
10SL
JH
G
FED
C
BAShell
Size
Metric
Imperial
36
149,00
5.866
145,00
5.709
118,00
4.646
76,00
2.992
71,00
2.795
120,00
4.724
112,00
4.409
109,00
4.291
64,00
2.520
40
149,00
5.866
148,00
5.827
123,00
4.842
75,00
2.593
71,00
2.795
122,00
4.803
112,00
4.409
112,00
4.409
64,00
2.520
36
143,00
5.630
152,00
5.984
117,00
4.606
75,00
2.593
71,00
2.795
125,00
4.921
106,00
4.173
112,00
4.409
64,00
2.520
32
137,00
5.394
155,00
6.102
111,00
4.370
76,00
2.992
71,00
2.795
130,00
5.118
101,00
3.976
113,00
4.449
65,00
2.559
28
130,00
5.118
148,00
5.827
110,00
4.331
75,00
2.593
72,00
2.835
129,00
5.079
101,00
3.976
113,00
4.449
65,00
2.559
24
126,00
4.961
151,00
5.945
104,00
4.094
72,00
2.835
72,00
2.835
129,00
5.079
97,00
3.819
126,00
4.961
65,00
2.559
22
126,00
4.961
151,00
5.945
104,00
4.094
72,00
2.835
72,00
2.835
129,00
5.079
97,00
3.819
126,00
4.961
65,00
2.559
20
126,00
4.961
154,00
6.063
104,00
4.094
72,00
2.835
72,00
2.835
132,00
5.197
97,00
3.819
130,00
5.118
65,00
2.559
18
126,00
4.961
157,00
6.181
97,00
3.819
66,00
2.598
69,00
2.716
129,00
5.079
94,00
3.700
129,00
5.079
63,00
2.480
16
102,00
4.016
135,00
5.315
83,00
3.268
52,00
2.047
56,00
2.205
115,00
4.528
81,00
3.189
121,00
4.764
50,00
1.969
16S
102,00
4.016
138,00
5.433
83,00
3.268
52,00
2.047
56,00
2.205
118,00
4.646
81,00
3.189
119,00
4.685
50,00
1.969
14S
102,00
4.016
141,00
5.551
83,00
3.268
52,00
2.047
54,00
2.126
122,00
4.803
81,00
3.189
123,00
4.843
50,00
1.969
10SL
UT
S
RPN
M
LKShell
Size
Connector & Accessory cont.
ABCIRH ‘03’ St
y
le
Metric
Imperial
37
AB Styles: ABCIRH04T or ABCIRH04EV
No Accessory or With Grommet & Grommet Nut
Size 49 Square Flange Front Mounting Receptacle
90,00
3.543
62,50
2.460
90,00
3.543
27/8” x 16 UN
8,00
0.315
8,50
0.335
110,00
4.330
56,50
2.224
49
XHG Dia.
F
Thread Dia.
Class 2A
E
D1
+0,2 -0
+0.008-0
CBShell
Size
ABCIRH04T
ABCIRH04EV
90,00
3.543
81,50
3.209
90,00
3.543
8,00
0.315
8,50
0.335
110,00
4.330
56,50
2.224
49
XHG Dia.E
D1
+0,2 -0
+0.008-0
CBShell
Size
Metric
Imperial
See page 82 for panel
mounting details
Metric
Imperial
See page 82 for panel
mounting details
38
90,00
3.543
15,00
0.590
62,50
2.460
90,00
3.543
27/8” x 16 UN
8,00
0.315
8,50
0.335
110,00
4.330
56,50
2.224
49
XPHG Dia.
F
Thread Dia.
Class 2A
E
D1
+0,2 -0
+0.008-0
CBShell
Size
ABCIRH05T
ABCIRH05EV
90,00
3.543
15,00
0.590
81,50
3.209
90,00
3.543
8,00
0.315
8,50
0.335
110,00
4.330
56,50
2.224
49
XPHG Dia.E
D1
+0,2 -0
+0.008-0
CBShell
Size
AB Styles: ABCIRH05T or ABCIRH05EV
No Accessory or With Grommet & Grommet Nut
Size 49 Square Flange Rear Mounting Receptacle
Metric
Imperial
See page 82 for panel
mounting details
Metric
Imperial
See page 82 for panel
mounting details
39
Style: ABCIRH06T/ABCIRHSE06T
Plug - Fine Knurl Coupling Nut
15,75
0.620
36,40
1.433
25/16” x 16 UN
27,00
1.063
74,00
2.913
40
15,75
0.620
36,40
1.433
21/16” x 16 UNS
27,00
1.063
68,00
2.677
36
15,75
0.620
36,40
1.433
17/8” x 16 UN
27,00
1.063
61,40
2.417
32
15,75
0.620
36,40
1.433
15/8” x 18 UNEF
24,00
0.945
54,50
2.146
28
15,75
0.620
36,40
1.433
13/8” x 18 UNEF
24,00
0.945
47,70
1.878
24
15,85
0.624
36,40
1.433
11/4” x 18 UNEF
24,00
0.945
44,20
1.740
22
15,85
0.624
36,40
1.433
11/8” x 18 UNEF
24,00
0.945
40,70
1.602
20
15,85
0.624
36,40
1.433
1” x 20 UNEF
24,00
0.945
37,30
1.468
18
15,85
0.624
36,40
1.433
7/8” x 20 UNEF
24,00
0.945
33,40
1.315
16
11,10
0.437
28,95
1.140
7/8” x 20 UNEF
17,50
0.689
33,40
1.315
16S
11,10
0.437
28,95
1.140
3/4” x 20 UNEF
17,50
0.689
30,60
1.205
14S
11,10
0.437
28,95
1.140
5/8” x 24 UNEF
17,50
0.689
24,20
0.953
10SL
Om Min
Overlap
Mated
H
Max
F
Thread Dia.
Class 2A
E
Max
C
Max
Shell
Size
ABCIRHSE06T
with Screening
Facility
Metric
Imperial
40
* Please consult factory for availability.
80,00
3.150
68,00
2.677
68,00
2.677
107,00
4.213
107,00
4.213
112,00
4.409
111,00
4.370
54,00
2.126
N/A
40
80,00
3.150
68,00
2.677
67,00
2.638
101,00
3.976
101,00
3.976
105,00
4.134
104,00
4.094
54,00
2.126
112,00
4.409
36
80,00
3.150
67,00
2.638
62,00
2.441
95,00
3.740
95,00
3.740
101,00
3.976
98,00
3.858
54,00
2.126
116,00
4.567
32
81,00
3.189
67,00
2.638
63,00
2.480
85,00
3.346
85,00
3.346
89,00
3.504
88,00
3.465
54,00
2.126
119,00
4.685
28
80,00
3.150
68,00
2.677
60,00
2.362
86,00
3.386
86,00
3.386
90,00
3.543
89,00
3.504
54,00
2.126
109,00
4.291
24
80,00
3.150
68,00
2.677
63,00
2.480
78,00
3.071
78,00
3.071
119,00
4.685
81,00
3.190
54,00
2.126
114,00
4.488
22
80,00
3.150
68,00
2.677
60,00
2.362
78,00
3.071
77,00
3.031
82,00
3.228
81,00
3.190
54,00
2.126
114,00
4.488
20
74,00
2.913
65,00
2.559
59,00
2.323
72,00
2.835
72,00
2.835
76,00
2.992
76,00
2.992
54,00
2.126
115,00
4.528
18
*
65,00
2.559
57,00
2.244
68,00
2.677
68,00
2.677
71,00
2.795
71,00
2.795
54,00
2.126
111,00
4.370
16
*
54,00
2.126
50,00
1.969
60,00
2.362
60,00
2.362
64,00
2.520
64,00
2.520
44,00
1.732
104,00
4.094
16S
*
54,00
2.126
50,00
1.969
57,00
2.244
56,00
2.205
60,00
2.362
61,00
2.402
44,00
1.732
107,00
4.213
14S
*
54,00
2.126
50,00
1.969
54,00
2.126
54,00
2.126
58,00
2.283
57,00
2.244
44,00
1.732
109,00
4.291
10SL
JH
G
FED
C
BAShell
Size
Connector & Accessor
y
ABCIRH ‘06’ Style
Metric
Imperial
41
Connector & Accessory cont.
ABCIRH ‘06’ Style
144,00
5.669
140,00
5.512
112,00
4.409
70,00
2.756
65,00
2.559
114,00
4.488
107,00
4.213
103,00
4.055
58,00
2.283
40
144,00
5.669
143,00
5.630
117,00
4.606
69,00
2.717
65,00
2.559
117,00
4.606
107,00
4.213
106,00
4.173
58,00
2.283
36
137,00
5.394
146,00
5.748
111,00
4.370
69,00
2.717
65,00
2.559
120,00
4.724
100,00
3.937
106,00
4.173
58,00
2.283
32
131,00
5.157
149,00
5.866
106,00
4.173
70,00
2.756
65,00
2.559
124,00
4.882
95,00
3.740
107,00
4.213
59,00
2.323
28
124,00
4.882
142,00
5.591
105,00
4.134
69,00
2.717
66,00
2.598
123,00
4.843
95,00
3.740
107,00
4.213
59,00
2.323
24
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
22
121,00
4.764
145,00
5.709
99,00
3.898
66,00
2.598
66,00
2.598
123,00
4.843
92,00
3.622
120,00
4.724
59,00
2.323
20
121,00
4.764
149,00
5.866
99,00
3.898
66,00
2.598
66,00
2.598
127,00
5.000
92,00
3.622
124,00
4.882
59,00
2.323
18
121,00
4.764
152,00
5.984
91,00
3.583
60,00
2.362
63,00
2.480
124,00
4.882
88,00
3.465
123,00
4.843
57,00
2.244
16
101,00
3.976
134,00
5.276
82,00
3.228
51,00
2.008
56,00
2.205
115,00
4.528
81,00
3.189
120,00
4.724
50,00
1.969
16S
101,00
3.976
137,00
5.394
82,00
3.228
51,00
2.008
56,00
2.205
118,00
4.646
81,00
3.189
119,00
4.685
50,00
1.969
14S
101,00
3.976
140,00
5.512
82,00
3.228
51,00
2.008
53,00
2.087
121,00
4.764
81,00
3.189
122,00
4.803
50,00
1.969
10SL
UT
S
RPN
M
LKShell
Size
Metric
Imperial
42
* Please consult factory for availability.
Style: ABCIRHP06T
Rubber Covered Coupling Nut
Plug
17,75
0.669
37,07
1.459
25/16” x 16 UN
27,10
1.067
80,00
3.150
88,00
3.465
40
17,75
0.669
37,07
1.459
21/16” x 16 UNS
27,10
1.067
74,30
2.925
82,30
3.240
36
17,75
0.669
37,07
1.459
17/8” x 16 UN
27,10
1.067
67,60
2.661
76,00
2.992
*32
17,75
0.669
37,07
1.459
15/8” x 18 UNEF
27,10
1.067
61,00
2.402
67,00
2.638
*28
17,75
0.669
37,07
1.459
13/8” x 18 UNEF
27,10
1.067
54,00
2.126
60,00
2.362
24
17,85
0.703
37,07
1.459
11/4” x 18 UNEF
27,10
1.067
50,50
1.988
56,00
2.205
22
17,85
0.703
37,07
1.459
11/8” x 18 UNEF
27,10
1.067
46,00
1.811
51,50
2.026
20
17,85
0.703
37,07
1.459
1” x 20 UNEF
27,10
1.067
43,50
1.713
49,00
1.929
18
17,85
0.703
37,07
1.459
7/8” x 20 UNEF
27,10
1.067
38,90
1.531
43,88
1.726
*16
13,10
0.516
29,55
1.163
7/8” x 20 UNEF
19,40
0.764
38,90
1.531
43,88
1.726
*16S
13,10
0.516
29,55
1.163
3/4” x 20 UNEF
19,40
0.764
35,20
1.386
40,20
1.583
*14S
13,10
0.516
29,55
1.163
5/8” x 24 UNEF
19,40
0.764
28,50
1.122
33,50
1.319
*10SL
Om Min
Overlap
Mated
H
Max
F
Thread Dia.
Class 2A
E
Max
C
Max
B
Max
Shell
Size
Metric
Imperial
43
* Please consult factory for availability.
81,00
3.189
69,00
2.717
108,00
4.252
108,00
4.252
112,00
4.409
112,00
4.409
55,00
2.165
NA
40
81,00
3.189
67,00
2.638
101,00
3.976
101,00
3.976
106,00
4.173
105,00
4.134
55,00
2.165
113,00
4.449
36
81,00
3.189
62,00
2.441
95,00
3.740
95,00
3.740
102,00
4.016
99,00
3.898
55,00
2.165
116,00
4.567
*32
82,00
3.228
64,00
2.520
85,00
3.346
85,00
3.346
89,00
3.504
89,00
3.504
55,00
2.165
119,00
4.685
*28
81,00
3.189
61,00
2.402
86,00
3.386
86,00
3.386
90,00
3.543
90,00
3.543
55,00
2.165
109,00
4.291
24
81,00
3.189
64,00
2.520
78,00
3.071
78,00
3.071
83,00
3.268
82,00
3.228
55,00
2.165
115,00
4.528
22
81,00
3.189
61,00
2.402
78,00
3.071
78,00
3.071
83,00
3.268
82,00
3.228
55,00
2.165
115,00
4.528
20
75,00
2.953
60,00
2.362
73,00
2.874
73,00
2.874
77,00
3.031
77,00
3.031
55,00
2.165
116,00
4.567
18
*
58,00
2.283
68,00
2.677
68,00
2.677
72,00
2.835
72,00
2.835
55,00
2.165
112,00
4.409
*16
*
50,00
1.969
61,00
2.402
61,00
2.402
65,00
2.559
65,00
2.559
44,00
1.732
105,00
4.134
*16S
*
50,00
1.969
57,00
2.244
57,00
2.244
61,00
2.402
61,00
2.402
44,00
1.732
108,00
4.252
*14S
*
50,00
1.969
55,00
2.165
55,00
2.165
58,00
2.283
58,00
2.283
44,00
1.732
109,00
4.291
*10SL
J
G
FED
C
BAShell
Size
Connector & Accessory
ABCIRH ‘P06’ Style
Metric
Imperial
44
* Please consult factory for availability.
Connector & Accessory cont.
ABCIRH ‘P06’ Style
144,00
5.669
140,00
5.512
113,00
4.449
71,00
2.795
116,00
4.567
107,00
4.213
104,00
4.094
59,00
2.323
40
144,00
5.669
144,00
5.669
118,00
4.646
70,00
2.756
117,00
4.606
107,00
4.213
107,00
4.213
59,00
2.323
36
138,00
5.433
147,00
5.787
112,00
4.409
70,00
2.756
121,00
4.764
101,00
3.976
107,00
4.213
59,00
2.323
*32
132,00
5.197
150,00
5.906
106,00
4.173
71,00
2.795
125,00
4.921
96,00
3.780
108,00
4.252
60,00
2.362
*28
125,00
4.921
143,00
5.630
106,00
4.173
70,00
2.756
124,00
4.882
96,00
3.780
108,00
4.252
60,00
2.362
24
121,00
4.764
146,00
5.748
99,00
3.898
67,00
2.638
124,00
4.882
93,00
3.661
121,00
4.764
60,00
2.362
22
121,00
4.764
146,00
5.748
99,00
3.898
67,00
2.638
124,00
4.882
93,00
3.661
121,00
4.764
60,00
2.362
20
121,00
4.764
149,00
5.866
99,00
3.898
67,00
2.638
127,00
5.000
93,00
3.661
125,00
4.921
60,00
2.362
18
121,00
4.764
152,00
5.984
92,00
3.622
61,00
2.402
124,00
4.882
89,00
3.504
124,00
4.882
58,00
2.283
*16
102,00
4.016
135,00
5.315
83,00
3.268
52,00
2.047
115,00
4.528
81,00
3.189
121,00
4.764
51,00
2.008
*16S
102,00
4.016
138,00
5.433
83,00
3.268
52,00
2.047
119,00
4.685
81,00
3.189
119,00
4.685
51,00
2.008
*14S
102,00
4.016
140,00
5.512
83,00
3.268
52,00
2.047
122,00
4.803
81,00
3.189
123,00
4.843
51,00
2.008
*10SL
UT
S
RN
M
LKShell
Size
Metric
Imperial
45
Style: ABCIRHP06GGL or GGS............
Rubber Covered Coupling Nut
ABCIRH Shell Size 49. Plug With Conduit Adaptor
13/4” x 18 UNEF-2A
29,00
1.142
ABCIRHP06GGS........
21/4” x 16 UN-2A
43,50
1.713
ABCIRHP06GGL.......
B Thread
A Dia.
Max.
Connector Style
Metric
Imperial
46
Style: ABCIRH07/ABCIRH07...M6
Through Bulkhead Receptacle
15,75
0.620
3,30
0.130
4,20
0.165
M5
4,30
0.169
70,20
2.764
26,80
1.055
52,10
2.051
40
15,75
0.620
3,30
0.130
4,20
0.165
M5
4,30
0.169
63,80
2.512
26,80
1.055
52,10
2.051
36
15,75
0.620
3,30
0.130
4,20
0.165
M5
4,30
0.169
57,30
2.256
26,80
1.055
52,10
2.051
32
15,75
0.620
3,30
0.130
4,20
0.165
M5
3,70
0.146
51,10
2.012
25,20
0.992
52,10
2.051
28
15,75
0.620
3,30
0.130
4,20
0.165
M4
3,70
0.146
44,80
1.764
25,20
0.992
52,10
2.051
24
15,75
0.620
3,30
0.130
4,20
0.165
M4
3,20
0.126
41,30
1.626
23,60
0.929
52,10
2.051
22
15,85
0.624
3,30
0.130
4,20
0.165
M4
3,20
0.126
38,30
1.508
23,60
0.929
52,10
2.051
20
15,85
0.624
3,30
0.130
4,20
0.165
M4
3,20
0.126
35,30
1.390
23,60
0.929
52,10
2.051
18
15,85
0.624
3,30
0.130
3,40
0.134
M4
3,20
0.126
32,80
1.291
22,80
0.898
52,10
2.051
16
11,10
0.437
3,30
0.130
3,40
0.134
M4
3,20
0.123
32,80
1.291
18,00
0.709
38,20
1.504
16S
11,10
0.437
3,30
0.130
3,40
0.134
M4
3,20
0.126
30,30
1.193
18,00
0.709
38,20
1.504
14S
11,10
0.437
3,30
0.130
3,00
0.118
M4
3,20
0.126
25,70
1.012
17,60
0.693
38,20
1.504
10SL
Om Min
Overlap
Mated
P
See Note
E
Max
d2
Thread
d1
+0,2 -0
+0.008-0
C
Max
B
Max
A
Max
Shell
Size
Pin Side Socket Side
Note. Maximum panel thickness when using cap head screws.
When using countersunk screws, maximum panel
thickness = 7.5 mm.
See page 82 for panel mounting details.
Metric
Imperial
47
Style: ABCIRH09A
Rear Mounted (No Accessory Thread)
Single Hole Mounting Receptacle
15,75
0.620
8,30
0.327
2,40
0.094
29,60
1.165
75,00
2.953
83,75
3.297
5,60
0.220
35,20
1.386
40
15,75
0.620
8,30
0.327
2,40
0.094
26,90
1.059
71,00
2.795
76,45
3.010
5,60
0.220
35,20
1.386
36
15,75
0.620
8,50
0.335
2,40
0.094
24,70
0.972
62,00
2.441
70,05
2.758
5,60
0.220
35,20
1.386
32
15,75
0.620
8,50
0.335
2,40
0.094
22,50
0.886
55,00
2.165
63,75
2.510
5,60
0.220
35,20
1.386
28
15,75
0.620
9,10
0.358
2,40
0.094
20,20
0.795
50,80
2.000
57,45
2.262
4,80
0.189
33,70
1.327
24
15,75
0.620
9,10
0.358
2,40
0.094
20,20
0.795
46,00
1.811
54,45
2.144
4,80
0.189
33,70
1.327
22
15,85
0.624
9,00
0.354
2,40
0.094
18,00
0.709
44,00
1.732
51,05
2.034
4,80
0.189
33,70
1.327
20
15,85
0.624
9,00
0.354
2,40
0.094
16,80
0.661
39,70
1.563
47,85
1.884
4,80
0.189
33,70
1.327
18
15,85
0.624
7,50
0.295
2,40
0.094
15,70
0.618
38,10
1.500
44,65
1.758
4,80
0.189
32,10
1.264
16
11,10
0.437
7,50
0.295
2,40
0.094
15,70
0.618
38,10
1.500
44,65
1.758
4,80
0.189
26,80
1.055
16S
11,10
0.437
7,50
0.295
2,40
0.094
14,60
0.575
33,00
1.299
41,55
1.636
4,80
0.189
26,80
1.055
14S
11,10
0.437
5,20
0.205
2,40
0.094
11,20
0.441
27,00
1.063
32,05
1.262
4,00
0.157
24,50
0.965
10SL
Om Min
Overlap
Mated
P
Min Max
G
E D
Max
CBShell
Size
See page 83 for panel
mounting details
Metric
Imperial
48
Style: ABCIRH09T
Rear Mounted (With Accessory Thread)
Single Hole Mounting Receptacle
15,75
0.620
8,30
0.327
2,40
0.094
29,60
1.165
25/16” x 16 UN
75,00
2.953
83,75
3.297
5,60
0.220
35,20
1.386
52,15
2.053
40
15,75
0.620
8,30
0.327
2,40
0.094
26,90
1.059
21/16” x 16 UNS
71,00
2.795
76,45
3.010
5,60
0.220
35,20
1.386
52,15
2.053
36
15,75
0.620
8,50
0.335
2,40
0.094
24,70
0.972
17/8” x 16 UN
62,00
2.441
70,05
2.758
5,60
0.220
35,20
1.386
52,15
2.053
32
15,75
0.620
8,50
0.335
2,40
0.094
22,50
0.886
15/8” x 18 UNEF
55,00
2.165
63,75
2.510
5,60
0.220
35,20
1.386
52,15
2.053
28
15,75
0.620
9,10
0.358
2,40
0.094
20,20
0.795
13/8” x 18 UNEF
50,80
2.000
57,45
2.262
4,80
0.189
33,70
1.327
49,55
1.951
24
15,75
0.620
9,10
0.358
2,40
0.094
20,20
0.795
11/4” x 18 UNEF
46,00
1.811
54,45
2.144
4,80
0.189
33,70
1.327
49,55
1.951
22
15,85
0.624
9,00
0.354
2,40
0.094
18,00
0.709
11/8” x 18 UNEF
44,00
1.732
51,05
2.034
4,80
0.189
33,70
1.327
49,55
1.951
20
15,85
0.624
9,00
0.354
2,40
0.094
16,80
0.661
1” x 20 UNEF
39,70
1.563
47,85
1.884
4,80
0.189
33,70
1.327
49,55
1.951
18
15,85
0.624
7,50
0.295
2,40
0.094
15,70
0.618
7/8” x 20 UNEF
38,10
1.500
44,65
1.758
4,80
0.189
32,10
1.264
48,75
1.919
16
11,10
0.437
7,50
0.295
2,40
0.094
15,70
0.618
7/8” x 20 UNEF
38,10
1.500
44,65
1.758
4,80
0.189
26,80
1.055
39,15
1.541
16S
11,10
0.437
7,50
0.295
2,40
0.094
14,60
0.575
3/4” x 20 UNEF
33,00
1.299
41,55
1.636
4,80
0.189
26,80
1.055
39,15
1.541
14S
11,10
0.437
5,20
0.205
2,40
0.094
11,20
0.441
5/8” x 24 UNEF
27,00
1.063
32,05
1.262
4,00
0.157
24,50
0.965
36,45
1.435
10SL
Om Min
Overlap
Mated
P
Min Max
G
F
Thread Dia.
Class 2A
E D
Max
CBA
Max
Shell
Size
See page 83 for panel
mounting details
Metric
Imperial
49
* Please consult factory for availability. ++ For connector with locking accessory, please refer to the Sales office.
Connector & Accessor
y
ABCIRH ‘09’ Style
96,00
3.780
84,00
3.307
84,00
3.307
123,00
4.843
123,00
4.843
128,00
5.039
127,00
5.000
70.00
2.756
NA
40
96,00
3.780
84,00
3.307
83,00
3.268
117,00
4.606
117,00
4.606
121,00
4.764
120,00
4.724
70,00
2.756
128,00
5.040
36
96,00
3.780
83,00
3.268
77,00
3.031
111,00
4.370
111,00
4.370
117,00
4.606
114,00
4.488
70,00
2.756
131,00
5.157
32
97,00
3.700
83,00
3.268
79,00
3.110
101,00
3.976
101,00
3.976
105,00
4.134
104,00
4.094
70,00
2.756
135,00
5.315
28
94,00
3.700
82,00
3.228
73,00
2.875
99,00
3.898
99,00
3.898
103,00
4.055
102,00
4.016
68,00
2.677
122,00
4.803
24
94,00
3.700
82,00
3.228
76,00
2.992
91,00
3.583
91,00
3.583
96,00
3.780
94,00
3.700
68,00
2.677
127,00
5.000
22
93,00
3.661
82,00
3.228
73,00
2.875
91,00
3.583
91,00
3.583
95,00
3.740
94,00
3.700
68,00
2.677
127,00
5.000
20
88,00
3.465
78,00
3.071
72,00
2.835
85,00
3.346
85,00
3.346
89,00
3.504
89,00
3.504
68,00
2.677
128,00
5.040
18
*
77,00
3.031
69,00
2.717
80,00
3.150
78,00
3.071
83,00
3.268
84,00
3.307
67,00
2.638
124,00
4.882
16
*
64,00
2.520
60,00
2.362
70,00
2.756
70,00
2.756
74,00
2.913
72,00
2.835
54,00
2.126
114,00
4.488
16S
*
64,00
2.520
60,00
2.362
67,00
2.638
67,00
2.638
71,00
2.795
70,00
2.756
54,00
2.126
117,00
4.606
14S
*
61,00
2.402
57,00
2.244
61,00
2.402
61,00
2.402
65,00
2.560
65,00
2.560
51,00
2.008
116,00
4.567
10SL
J++H
++G
++F++E++D
++C
BAShell
Size
Metric
Imperial
50
++ For connector with locking accessory, please refer to the Sales office.
Connector & Accessory cont.
ABCIRH ‘09’ Style
159,00
6.260
155,00
6.102
128,00
5.039
86,00
3.386
81,00
3.189
131,00
5.157
123,00
4.843
119,00
4.685
74,00
2.913
40
159,00
6.260
159,00
6.260
133,00
5.236
85,00
3.346
81,00
3.189
133,00
5.236
122,00
4.803
122,00
4.803
74,00
2.913
36
153,00
6.024
162,00
6.378
127,00
5.000
85,00
3.346
81,00
3.189
136,00
5.354
116,00
4.567
122,00
4.803
74,00
2.913
32
147,00
5.787
165,00
6.496
121,00
4.764
86,00
3.386
81,00
3.189
140,00
5.512
112,00
4.409
123,00
4.843
75,00
2.953
28
134,00
5.276
159,00
6.260
112,00
4.409
79,00
3.110
80,00
3.150
137,00
5.394
108,00
4.252
120,00
4.724
73,00
2.875
24
134,00
5.276
159,00
6.260
112,00
4.409
79,00
3.110
80,00
3.150
137,00
5.394
105,00
4.134
133,00
5.236
73,00
2.875
22
134,00
5.276
159,00
6.260
112,00
4.409
79,00
3.110
80,00
3.150
137,00
5.394
105,00
4.134
133,00
5.236
73,00
2.875
20
134,00
5.276
162,00
6.378
112,00
4.409
79,00
3.110
80,00
3.150
140,00
5.512
105,00
4.134
138,00
5.433
73,00
2.875
18
133,00
5.236
134,00
5.276
103,00
4.055
72,00
2.835
76,00
2.992
136,00
5.354
101,00
3.976
135,00
5.315
72,00
2.835
16
112,00
4.409
144,00
5.669
92,00
3.622
61,00
2.402
66,00
2.598
125,00
4.921
91,00
3.583
131,00
5.157
60,00
2.362
16S
112,00
4.409
147,00
5.787
92,00
3.622
61,00
2.402
66,00
2.598
128,00
5.039
91,00
3.583
129,00
5.079
60,00
2.362
14S
109,00
4.291
148,00
5.827
90,00
3.543
59,00
2.323
61,00
2.402
130,00
5.118
88,00
3.465
130,00
5.118
57,00
2.244
10SL
++U++T
S
R++PN
++M
++L++KShell
Size
Metric
Imperial
51
Style: ABCIRH12A/ABCIRH12A...M6
Panel Mounted Plug (No Accessory Thread)
See page 82 for panel
mounting details
Metric
Imperial
15,75
0.620
45,00
1.772
4,20
0.165
M5
4,30
0.169
70,20
2.764
74,00
2.913
40
15,75
0.620
45,00
1.772
4,20
0.165
M5
4,30
0.169
63,80
2.512
68,00
2.677
36
15,75
0.620
45,00
1.772
4,20
0.165
M5
4,30
0.169
57,30
2.256
61,40
2.417
32
15,75
0.620
41,80
1.646
4,20
0.165
M5
3,20
0.126
51,10
2.012
54,50
2.146
28
15,75
0.620
41,00
1.614
4,20
0.165
M4
3,20
0.126
44,80
1.764
47,70
1.878
24
15,85
0.624
38,60
1.519
4,20
0.165
M4
3,20
0.126
41,30
1.626
44,20
1.740
22
15,85
0.624
38,60
1.519
4,20
0.165
M4
3,20
0.126
38,30
1.508
40,70
1.602
20
15,85
0.624
38,60
1.519
4,20
0.165
M4
3,20
0.126
35,30
1.390
37,30
1.469
18
15,85
0.624
37,60
1.480
3,40
0.134
M4
3,20
0.126
32,80
1.291
33,40
1.315
16
11,10
0.437
28,10
1.106
3,40
0.134
M4
3,20
0.126
32,80
1.291
33,40
1.315
16S
11,10
0.437
28,10
1.106
3,40
0.134
M4
3,20
0.126
30,30
1.193
30,60
1.205
14S
11,10
0.437
28,10
1.106
3,00
0.118
M4
3.20
0.126
25,70
1.012
24,20
0.953
10SL
0m Min.
Overlap, mated
H Max.E Max.
d2
Thread
d1
+0.2, -0 mm
C Max.A Max.
Shell
Size
52
*
Please consult factory for availability.
Style: ABB - ** - CRA
Accessory Type ‘RM’
Conduit Adaptor With Braid Screen Trap - No Grommet
Note.
This accessory can only be used in
conjunctionwith style ‘CCA’, ‘H’ or ‘FT’ adaptor.
35,60
1.402
63,10
2.484
32,33
1.273
30,60
1.205
13,00
0.512
21/4’’ x 16 UN 21/4” x 16 UN
40
35,19
1.385
55,90
2.201
32,00
1.260
30,60
1.205
13,00
0.512
2’’ x 18 UNS2” x 18 UNS
36
29,10
1.146
49,55
1.951
25,93
1.021
30,60
1.205
13,00
0.512
13/4’’ x 18 UNS13/4” x 18 UNS
32
29,21
1.150
43,60
1.717
25,93
1.021
30,60
1.205
11,00
0.433
13/4’’ x 18 UNS17/16” x 18 UNEF
28
29,21
1.150
43,60
1.717
25,93
1.021
30,60
1.205
11,00
0.433
13/4’’ x 18 UNS17/16” x 18 UNEF
24
21,51
0.847
35,45
1.396
18,23
0.718
30,60
1.205
11,00
0.433
17/16’’ x 18 UNEF13/16” x 18 UNEF
22
21,51
0.847
35,45
1.396
18,23
0.718
30,60
1.205
11,00
O.433
17/16’’ x 18 UNEF13/16” x 18 UNEF
20
16,26
0.640
29,10
1.146
12,90
0.508
30,60
1.205
11,00
0.433
13/16” x 18 UNEF1” x 20 UNEF
18
13,10
0.516
25,50
1.004
9,74
0.383
30,60
1.205
11,00
0.433
1” x 20 UNEF
7/8” x 20 UNEF
16
13,10
0.516
25,50
1.004
9,74
0.383
27,60
1.087
10,00
0.394
1” x 20 UNEF
7/8” x 20 UNEF
16S
11,71
0.461
21,53
0.848
8,51
0.335
27,60
1.087
10,00
0.394
7/8” x 20 UNEF
3/4” x 20 UNEF
14S
----
---
*10SL
M
Max
T
Max
S
Min
N
Max
G
Max
F1
Thread Dia.
Class 2A
F
Thread Dia.
Class 2B
Shell
Size
ABB - ** - CRA
Shell size
How to order:
Metric
Imperial
53
Style: ABBH - ** - ** - OCN - F80
Accessory Type ‘D’
Non-Locking Cable Clamp With Grommet & Follower
How to order:
ABBH - ** - ** - OCN - F80
Shell size
Contact arrangement
7,00
0.276
71,68
2.822
24,51/31,93
0.965/1.257
82,98
3.267
54,79
2.157
21/16” x 16 UNS
36
7,00
0.276
68,43
2.694
19,18/23,98
0.755/0.944
86,13
3.390
54,79
2.157
17/8” x 16 UN
32
7,00
0.276
60,45
2.380
14,15/19,23
0.557/0.757
89,31
3.516
54,79
2.157
15/8” x 18 UNEF
28
7,00
0.276
56,29
2.216
14,55/19,23
0.573/0.757
79,20
3.118
44,68
1.759
13/8” x 18 UNEF
24
7,00
0.276
49,63
1.954
10,54/16,00
0.415/0.632
84,61
3.331
44,68
1.759
11/4” x 18 UNEF
22
7,00
0.276
49,63
1.954
10,54/16,00
0.415/0.632
84,61
3.331
44,68
1.759
11/8” x 18 UNEF
20
7,00
0.276
45,52
1.792
8,79/14,45
0.346/0.569
85,55
3.368
44,68
1.759
1” x 20 UNEF
18
7,00
0.276
41,45
1.632
7,82/11,30
0.308/0.444
81,99
3.228
27,41
1.079
7/8” x 20 UNEF
16
7,00
0.276
41,45
1.632
7,82/11,30
0.308/0.444
81,99
3.228
27,41
1.079
7/8” x 20 UNEF
16S
7,00
0.276
39,88
1.570
4,62/8,10
0.182/0.319
85,04
3.348
27,41
1.079
3/4” x 20 UNEF
14S
7,00
0.276
35,15
1.384
3,68/5,76
0.145/0.227
86,68
3.413
36,42
1.434
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min/Max
N2
Max
N1
Max
F
Thread Dia.
Class 2B
Shell
Size
Metric
Imperial
54
Style: ABBH - ** - ** - EV - F80
Accessory Type ‘EV’
Non-Locking Grommet Nut With Grommet & Follower
7,60
0.300
45,90
1.807
25,64
1.009
25/16” x 16 UN
63.00
2.480
40
7,60
0.300
41,00
1.614
25,53
1.005
21/16” x 16 UNS
58,70
2.311
36
7,60
0.300
36,73
1.446
25,53
1.005
17/8” x 16 UN
54,10
2.130
32
7,60
0.300
30,13
1.186
25,53
1.005
15/8” x 18 UNEF
47,80
1.882
28
7,60
0.300
25,40
1.000
25,53
1.005
13/8” x 18 UNEF
41,40
1.630
24
7,60
0.300
21,34
0.840
25,53
1.005
11/4” x 18 UNEF
38,20
1.504
22
7,60
0.300
19,80
0.780
25,53
1.005
11/8” x 18 UNEF
34,90
1.374
20
7,60
0.300
16,70
0.657
25,53
1.005
1” x 20 UNEF
31,90
1.256
18
7,60
0.300
14,30
0.563
25,53
1.005
7/8” x 20 UNEF
28,70
1.130
16
6,10
0.240
14,30
0.563
20,83
0.820
7/8” x 20 UNEF
28,70
1.130
16S
6,10
0.240
11,10
0.437
20,83
0.820
3/4” x 20 UNEF
24,80
0.976
14S
6,10
0.240
8,60
0.339
20,83
0.820
5/8” x 24 UNEF
21,60
0.850
10SL
Oa Min
Overlap
Accessory
S
Min
N
Max
F
Thread Dia.
Class 2B
T
Max
Shell
Size
How to order:
ABBH - ** - ** - EV - F80
Shell size
Contact arrangement
Metric
Imperial
55
Style: ABBH - ** - ** - F - F80
Accessory Type ‘F’
Locking 900 Outlet With Cable Clamp & Grommet
7,00
0.276
35,10
1.382
65,00
2.559
67,00
2.638
85,50
3.366
25/16” x 16 UN
100,00
3.937
54,60
2.150
49,00
1.929
40
7,00
0.276
31,93
1.257
58,00
2.283
61,00
2.402
69,00
2.717
21/16” x 16 UNS
110,00
4.331
50,00
1.969
45,90
1.807
36
7,00
0.276
23,98
0.944
51,70
2.035
54,00
2.126
66,00
2.598
17/8” x 16 UN
110,00
4.331
45,00
1.772
43,10
1.697
32
7,00
0.276
19,23
0.757
43,30
1.705
48,00
1.890
58,00
2.283
15/8” x 18 UNEF
100,00
3.937
40,00
1.575
37,10
1.461
28
7,00
0.276
19,23
0.757
43,30
1.705
41,00
1.614
58,00
2.283
13/8” x 18 UNEF
100,00
3.937
40,00
1.575
37,90
1.492
24
7,00
0.276
16,00
0.632
37,50
1.476
38,00
1.496
53,00
2.087
11/4” x 18 UNEF
100,00
3.937
35,00
1.378
33,10
1.303
22
7,00
0.276
16,00
0.632
37,50
1.476
35,00
1.378
53,00
2.087
11/8” x 18 UNEF
100,00
3.937
35,00
1.378
33,00
1.299
20
7,00
0.276
14,45
0.569
33,00
1.299
31,00
1.220
53,00
2.087
1” x 20 UNEF
100,00
3.937
35,00
1.378
30,10
1.224
18
7,00
0.276
11,30
0.444
30,00
1.181
28,00
1.102
45,00
1.772
7/8” x 20 UNEF
100,00
3.937
30,00
1.181
27,00
1.063
16
7,00
0.276
11,30
0.444
30,00
1.181
28,00
1.102
45,00
1.772
7/8” x 20 UNEF
100,00
3.937
30,00
1.181
27,00
1.063
16S
7,00
0.276
8,10
0.319
27,50
1.083
25,00
0.984
42,00
1.654
3/4” x 20 UNEF
100,00
3.937
30,00
1.181
25,00
0.984
14S
7,00
0.276
5,76
0.227
22,70
0.894
22,00
0.866
42,00
1.654
5/8” x 24 UNEF
100,00
3.937
30,00
1.181
24,00
0.945
10SL
Oa Min
Overlap
Accessory
S
Max
T1
Max
T
Max
N
Max
F
Thread Dia.
Class 2B
C1
Max
C
Max
B
Max
Shell
Size
ABBH - ** - ** - F - F80
Shell size
Contact arrangement
How to order:
Metric
Imperial
56
St
y
le:
A
BBH - ** - ** - FC - F80
Accessor
y
T
yp
e ‘FC’
Locking 900 Outlet, Sealed Cable Clamp & Grommet
ABBH - ** - ** - FC - F80
Shell size
Contact arrangement
How to order:
7,00
0.276
67,00
2.638
25/16” x 16 UN
103,00
4.055
66,68
2.625
49,00
1.929
40
7,00
0.276
61,00
2.402
21/16” x 16 UNS
98,00
3.858
60,33
2.375
45,90
1.807
36
7,00
0.276
54,00
2.126
17/8” x 16 UN
87,00
3.425
57,15
2.250
43,10
1.697
32
7,00
0.276
48,00
1.890
15/8” x 18 UNEF
76,00
2.992
44,45
1.750
37,10
1.461
28
7,00
0.276
41,00
1.614
13/8” x 18 UNEF
76,00
2.992
44,45
1.750
37,90
1.492
24
7,00
0.276
38,00
1.496
11/4” x 18 UNEF
68,00
2.677
39,67
1.562
33,10
1.303
22
7,00
0.276
35,00
1.378
11/8” x 18 UNEF
68,00
2.677
39,67
1.562
33,00
1.299
20
7,00
0.276
31,00
1.220
1” x 20 UNEF
68,00
2.677
33,32
1.312
30,10
1.224
18
7,00
0.276
28,00
1.102
7/8” x 20 UNEF
61,00
2.402
30,18
1.188
27,00
1.063
16
7,00
0.276
28,00
1.102
7/8” x 20 UNEF
61,00
2.402
30,18
1.188
27,00
1.063
16S
7,00
0.276
25,00
0.984
3/4” x 20 UNEF
61,00
2.402
26,97
1.062
25,00
0.984
14S
7,00
0.276
22,00
0.866
5/8” x 24 UNEF
61,00
2.402
23,80
0.937
24,00
0.945
10SL
Oa Min
Overlap
Accessory
T
Max
F
Thread Dia.
Class 2B
D
Max
C
Max
B
Max
Shell
Size
Metric
Imperial
57
Style: ABBH - ** - ** - FT - F80
Accessory Type ‘FT’
Locking 900 Outlet With Grommet
7,00
0.276
67,00
2.638
21/4’’ x 16 UN 25/16” x 16 UN
54,60
2.150
49,00
1.929
40
7,00
0.276
61,00
2.402
2’’ x 18 UNS21/16” x 16 UNS
50,00
1.969
45,90
1.807
36
7,00
0.276
54,00
2.126
13/4’’ x 18 UNS17/8” x 16 UN
45,00
1.772
43,10
1.697
32
7,00
0.276
48,00
1.890
17/16’’ x 18 NEF15/8” x 18 UNEF
40,00
1.575
37,10
1.461
28
7,00
0.276
41,00
1.614
17/16’’ x 18 NEF13/8” x 18 UNEF
40,00
1.575
37,90
1.492
24
7,00
0.276
38,00
1.496
13/16’’ x 18 UNEF11/4” x 18 UNEF
35,00
1.378
33,10
1.303
22
7,00
0.276
35,00
1.378
13/16’’ x 18 UNEF11/8” x 18 UNEF
35,00
1.378
33,00
1.299
20
7,00
0.276
31,00
1.220
1’’ x 20 UNEF1” x 20 UNEF
35,00
1.378
30,10
1.224
18
7,00
0.276
28,00
1.102
7/8’’ x 20 UNEF
7/8” x 20 UNEF
30,00
1.181
27,00
1.063
16
7,00
0.276
28,00
1.102
7/8’’ x 20 UNEF
7/8” x 20 UNEF
30,00
1.181
27,00
1.063
16S
7,00
0.276
25,00
0.984
3/4’’ x 20 UNEF
3/4” x 20 UNEF
30,00
1.181
25,00
0.984
14S
7,00
0.276
22,00
0.866
5/8’’ x 24 UNEF
5/8” x 24 UNEF
30,00
1.181
24,00
0.945
10SL
Oa Min
Overlap
Accessory
T
Max
F1
Thread Dia.
Class 2A
F
Thread Dia.
Class 2B
C
Max
B
Max
Shell
Size
ABBH - ** - ** - FT - F80
Shell size
Contact arrangement
How to order:
Metric
Imperial
58
Style: ABBH - ** - ** - FM - F80
Accessory Type ‘FM’
Locking 900 Outlet RFI Shielded With Grommet
ABBH - ** - ** - FM - F80
Shell size
Contact arrangement
How to order:
7,00
0.276
67,00
2.638
25/16” x 16 UN
48,50
1.909
54,60
2.150
49,00
1.929
57,20
2.252
40
7,00
0.276
61,00
2.402
21/16” x 16 UNS
40,67
1.601
50,00
1.969
45,90
1.807
50,90
2.004
36
7,00
0.276
54,00
2.126
17/8” x 16 UN
36,48
1.436
45,00
1.772
43,10
1.697
44,50
1.752
32
7,00
0.276
48,00
1.890
15/8” x 18 UNEF
30,38
1.196
40,00
1.575
37,10
1.461
36,60
1.441
28
7,00
0.276
41,00
1.614
13/8” x 18 UNEF
25,10
0.988
40,00
1.575
37,90
1.492
36,60
1.441
24
7,00
0.276
38,00
1.496
11/4” x 18 UNEF
21,62
0.851
35,00
1.378
33,10
1.303
30,20
1.189
22
7,00
0.276
35,00
1.378
11/8” x 18 UNEF
18,10
0.713
35,00
1.378
33,00
1.299
30,20
1.189
20
7,00
0.276
31,00
1.220
1” x 20 UNEF
15,14
0.596
35,00
1.378
30,10
1.224
25,50
1.004
18
7,00
0.276
28,00
1.102
7/8” x 20 UNEF
13,01
0.512
30,00
1.181
27,00
1.063
22,30
0.878
16
7,00
0.276
28,00
1.102
7/8” x 20 UNEF
13,01
0.512
30,00
1.181
27,00
1.063
22,30
0.878
16S
7,00
0.276
25,00
0.984
3/4” x 20 UNEF
10,36
0.408
30,00
1.181
25,00
0.984
19,10
0.764
14S
7,00
0.276
22,00
0.866
5/8” x 24 UNEF
7,77
0.306
30,00
1.181
24,00
0.945
15,90
0.626
10SL
Oa Min
Overlap
Accessory
T
Max
F
Thread Dia.
Class 2B
D
Max
C
Max
B
Max
A
Max
Shell
Size
Metric
Imperial
59
Style: ABBH - ** - ** - HSA - F80
Accessory Type ‘G’
Locking Heatshrink Adaptor With Grommet
How to order:
ABBH - ** - ** - HSA - F80
Shell size
Contact arrangement
7,00
0.276
67,00
2.638
48,10
1.894
38.30
1.508
57,95
2.281
12,10
0.476
25/16” x 16 UN
40
7,00
0.276
61,00
2.40
38,50
1.516
39.26
1.546
48,00
1.890
11,70
0.461
21/16” x 16 UNS
36
7,00
0.276
54,00
2.13
33,30
1.311
38.26
1.506
48,00
1.890
11,70
0.461
17/8” x 16 UN
32
7,00
0.276
48,00
1.89
27,00
1.063
35.76
1.408
38,00
1.496
9,20
0.362
15/8” x 18 UNEF
28
7,00
0.276
41,00
1.62
24,60
0.969
35.80
1.409
38,00
1.496
9,20
0.362
13/8” x 18 UNEF
24
7,00
0.276
38,00
1.50
20,80
0.819
35.80
1.409
29,80
1.173
9,20
0.362
11/4” x 18 UNEF
22
7,00
0.276
35,00
1.38
18,70
0.736
35.80
1.409
29,80
1.173
9,20
0.362
11/8” x 18 UNEF
20
7,00
0.276
31,00
1.22
14,60
0.575
32.26
1.270
24,10
0.949
8,00
0.315
1” x 20 UNEF
18
7,00
0.276
28,00
1.11
13,50
0.532
32.26
1.270
24,10
0.949
8,00
0.315
7/8” x 20 UNEF
16
7,00
0.276
28,00
1.11
13,50
0.532
28.46
1.120
24,10
0.949
8,20
0.323
7/8” x 20 UNEF
16S
7,00
0.276
25,00
0.99
10.60
0.417
28.46
1.120
19,30
0.760
8,20
0.323
3/4” x 20 UNEF
14S
7,00
0.276
22,00
0.87
7,70
0.303
28.46
1.120
15,70
0.618
8,20
0.323
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
M
Max
G
Max
F
Thread Dia.
Class 2B
Shell
Size
Metric
Imperial
60
Style: ABBH - ** - ** - LHSA - F80
Accessory Type ‘GM’
Locking RFI Shielded Adaptor With Grommet
How to order:
ABBH - ** - ** - LHSA - F80
Shell size
Contact arrangement
7,00
0.276
67,00
2.638
48,10
1.894
38.30
1.508
57,95
2.281
12,10
0.476
25/16” x 16 UN
40
7,00
0.276
61,00
2.40
41,00
1.614
39.26
1.546
48,00
1.890
12,10
0.476
21/16” x 16 UNS
36
7,00
0.276
54,00
2.13
36,73
1.446
38.26
1.506
48,00
1.890
12,10
0.476
17/8” x 16 UN
32
7,00
0.276
48,00
1.89
30,13
1.186
38.56
1.518
38,00
1.496
12,40
0.488
15/8” x 18 UNEF
28
7,00
0.276
41,00
1.62
25,40
1.000
38.60
1.520
38,00
1.496
12,40
0.488
13/8” x 18 UNEF
24
7,00
0.276
38,00
1.50
21,34
0.840
38.60
1.520
29,80
1.173
12,40
0.488
11/4” x 18 UNEF
22
7,00
0.276
35,00
1.38
19,80
0.780
38.60
1.520
29,80
1.173
12,40
0.488
11/8” x 18 UNEF
20
7,00
0.276
31,00
1.22
16,70
0.657
36.06
1.420
24,10
0.949
12,40
0.488
1” x 20 UNEF
18
7,00
0.276
28,00
1.102
14,30
0.563
36.06
1.420
24,10
0.949
12,40
0.488
7/8” x 20 UNEF
16
7,00
0.276
28,00
1.102
14,30
0.563
32.26
1.270
24,10
0.949
12,40
0.488
7/8” x 20 UNEF
16S
7,00
0.276
25,00
0.984
11,10
0.437
32.26
1.270
19,30
0.760
12,40
0.488
3/4” x 20 UNEF
14S
7,00
0.276
22,00
0.87
8,60
0.339
32.26
1.270
15,70
0.618
12,40
0.488
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
M
Max
G
Max
F
Thread Dia.
Class 2B
Shell
Size
61
Metric
Imperial
*Please consult factory for availability.
Style: ABBH - ** - ** - HSAS - F80
Accessory Type ‘GS’
Non-Locking Heatshrink Adaptor, Grommet & Follower
How to order:
ABBH - ** - ** - HSAS - F80
Shell size
Contact arrangement
7,40
0.291
63,10
2.484
48,10
1.894
51,10
2.012
11,90
0.469
57,95
2.281
25/16” x 16 UN
40
7,40
0.291
57,45
2.262
38,60
1.520
51,10
2.012
11,90
0.469
48,00
1.890
21/16” x 16 UNS
36
7,40
0.291
50,80
2.000
33,40
1.315
51,10
2.012
11,90
0.469
48,00
1.890
17/8” x 16 UN
32
6,34
0.250
45,60
1.795
27,10
1.067
51,10
2.012
11,90
0.469
38,00
1.496
15/8” x 18 UNEF
28
7,14
0.281
39,10
1.539
24,70
0.972
51,10
2.012
11,90
0.469
38,00
1.496
13/8” x 18 UNEF
24
7,14
0.281
35,03
1.379
20,90
0.823
51,10
2.012
11,90
0.469
29,80
1.173
11/4” x 18 UNEF
22
7,34
0.289
31,85
1.254
18,70
0.736
51,10
2.012
11,90
0.469
29,80
1.173
11/8” x18 UNEF
20
7,34
0.289
28,60
1.126
14,70
0.579
45,30
1.783
11,90
0.469
24,10
0.949
1” x 20 UNEF
18
-------
*16
-------
*16S
-------
*14S
-------
*10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
G
Max
M
Max
F
Thread Dia.
Class 2B
Shell
Size
Metric
Imperial
62
Style: ABBH - ** - ** - ACA - F80
Accessory Type ‘H’
Locking Armoured Conduit Adaptor With Grommet
How to order:
ABBH - ** - ** - ACA - F80
Shell size
Contact arrangement
7,00
0.276
67,00
2.638
45,00
1.772
28,90
1.138
11,80
0.464
21/4’’ x 16 UN25/16” x 16 UN
40
7,00
0.276
61,00
2.40
35,70
1.406
28,90
1.138
11,80
0.464
2’’ x 18 NS21/16” x 16 UNS
36
7,00
0.276
54,00
2.13
32,50
1.280
28,90
1.138
11,00
0.433
13/4’’ x 18 NS17/8” x 16 UN
32
7,00
0.276
48,00
1.89
27,00
1.063
30,00
1.181
9,50
0.374
17/16’’ x 18 NEF15/8” x 18 UNEF
28
7,00
0.276
41,00
1.62
25,40
1.000
29,90
1.177
9,50
0.374
17/16’’ x 18 NEF13/8” x 18 UNEF
24
7,00
0.276
38,00
1.50
19,80
0.780
29,90
1.177
9,50
0.374
13/16’’ x 18 NEF11/4” x 18 UNEF
22
7,00
0.276
35,00
1.38
19,80
0.780
29,90
1.177
9,50
0.374
13/16’’ x 18 NEF11/8” x18 UNEF
20
7,00
0.276
31,00
1.22
16,70
0.657
29,90
1.177
9,50
0.374
1” x 20 UNEF1” x 20 UNEF
18
7,00
0.276
28,00
1.11
14,30
0.563
27,90
1.098
9,50
0.374
7/8” x 20 UNEF
7/8” x 20 UNEF
16
7,00
0.276
28,00
1.11
14,30
0.563
27,90
1.098
9,50
0.374
7/8” x 20 UNEF
7/8” x 20 UNEF
16S
7,00
0.276
25,00
0.99
11,10
0.437
27,90
1.098
9,50
0.374
3/4” x 20 UNEF
3/4” x 20 UNEF
14S
7,00
0.276
22,00
0.87
8,20
0.323
27,90
1.098
9,50
0.374
5/8” x 24 UNEF
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
G
Max
F1
Thread Dia.
Class 2A
F
Thread Dia.
Class 2B
Shell
Size
63
Metric
Imperial
Style: ABBH - ** - ** - HC - F80
Accessory Type ‘HC’
Locking Cable Clamp With Grommet
Note.
Clamp & bush are available
separately. See pages 74 &
76 respectively.
How to order:
ABBH - ** - ** - HC - F80
Shell size
Contact arrangement
7,00
0.276
65,00
2.56
34.92
1.375
73,80
2.90
59,80
2.35
25/16” x 16 UN
40
7,00
0.276
58,00
2.29
31.75
1.250
76,40
3.01
46,40
1.826
21/16” x 16 UNS
36
7,00
0.276
51,70
2.04
23.80
0.937
76,50
3.02
46,50
1.83
17/8” x 16 UN
32
7,00
0.276
43,30
1.71
19.05
0.750
77,60
3.06
47,60
1.88
15/8” x 18 UNEF
28
7,00
0.276
43,30
1.71
19.05
0.750
77,50
3.05
47,50
1.87
13/8” x 18 UNEF
24
7,00
0.276
37,50
1.48
15.88
0.625
90,50
3.57
45,50
1.80
11/4” x 18 UNEF
22
7,00
0.276
37,50
1.48
15.88
0.625
90,50
3.57
45,50
1.80
11/8” x 18 UNEF
20
7,00
0.276
33,00
1.30
14.27
0.562
95,00
3.74
50,00
1.97
1” x 20 UNEF
18
7,00
0.276
30,00
1.19
11.10
0.437
93,50
3.68
43,50
1.72
7/8” x 20 UNEF
16
7,00
0.276
30,00
1.19
11.10
0.437
98,50
3.88
43,50
1.72
7/8” x 20 UNEF
16S
7,00
0.276
27,50
1.09
7.92
0.312
96,70
3.81
41,70
1.65
3/4” x 20 UNEF
14S
7,00
0.276
22,70
0.90
5.59
0.220
100,10
3.94
40,10
1.58
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
SN2
Max
N1
Max
F
Thread Dia.
Class 2B
Shell
Size
Metric
Imperial
64
Style: ABBH - ** - ** - HD - F80
Accessory Type ‘HD’
Locking Sealed Cable Clamp With Grommet
ABBH - ** - ** - HD - F80
Shell size
Contact arrangement
How to order:
7,00
0.276
67,00
2.638
25/16” x 16 UN
30,18
1.188
41,25
1.624
66,68
2.625
77,31
3.044
40
7,00
0.276
61,00
2.402
21/16” x 16 UNS
24,61
0.969
35,00
1.378
60,33
2.375
77,31
3.044
36
7,00
0.276
54,00
2.126
17/8” x 16 UN
23,83
0.938
31,75
1.250
57,15
2.250
70,96
2.794
32
7,00
0.276
48,00
1.890
15/8” x 18 UNEF
15,09
0.594
23,80
0.937
44,45
1.750
65,71
2.587
28
7,00
0.276
41,00
1.614
13/8” x 18 UNEF
15,09
0.594
23,80
0.937
44,45
1.750
65,61
2.583
24
7,00
0.276
38,00
1.496
11/4” x 18 UNEF
12,70
0.500
19,00
0.748
39,21
1.562
62,44
2.458
22
7,00
0.276
35,00
1.378
11/8” x 18 UNEF
12,70
0.500
19,00
0.748
39,21
1.562
62,44
2.458
20
7,00
0.276
31,00
1.220
1” x 20 UNEF
9,53
0.375
15,87
0.625
33,32
1.312
62,44
2.458
18
7,00
0.276
28,00
0.984
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
30,18
1.188
58,87
2.318
16
7,00
0.276
28,00
0.984
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
30,18
1.188
58,87
2.318
16S
7,00
0.276
25,00
0.984
3/4” x 20 UNEF
6,35
0.250
11,12
0.438
26,97
1.062
58,87
2.318
14S
7,00
0.276
22,00
0.866
5/8” x 24 UNEF
2,38
0.094
7,93
0.312
23,80
0.937
58,87
2.318
10SL
Oa Min
Overlap
Accessory
T
Max
F
Thread Dia.
Class 2B
C
Max Min
B
A
Max
Shell
Size
65
Metric
Imperial
Style: ABBH - ** - ** - JE - F80
Accessory Type ‘JE’
Non-Locking Cable Clamp With Grommet & Follower
How to order:
ABBH - ** - ** - JE - F80
Shell size
Contact arrangement
6,34
0.250
63,10
2.484
34.92
1.375
84,43
3.324
25/16” x 16 UN
40
7,40
0.291
57,45
2.262
31.75
1.250
87,67
3.452
21/16” x 16 UNS
36
7,40
0.291
50,80
2.000
23.80
0.937
90,83
3.576
17/8” x 16 UN
32
6,34
0.250
45,60
1.795
19.05
0.750
94,01
3.701
15/8” x 18 UNEF
28
7,14
0.281
39,10
1.539
19.05
0.750
94,01
3.701
13/8” x 18 UNEF
24
7,34
0.289
35,03
1.379
15.88
0.625
94,33
3.714
11/4” x 18 UNEF
22
7,34
0.289
31,85
1.254
15.88
0.625
94,33
3.714
11/8” x18 UNEF
20
7,34
0.289
28,60
1.126
14.27
0.562
97,51
3.839
1” x 20 UNEF
18
7,00
0.276
25,50
1.004
11.10
0.437
94,28
3.712
7/8” x 20 UNEF
16
7,00
0.276
25,50
1.004
11.10
0.437
92,78
6.653
7/8” x 20 UNEF
16S
7,00
0.276
22,10
0.870
7.92
0.312
95,96
3.778
3/4” x 20 UNEF
14S
7,00
0.276
19,10
0.752
5.59
0.220
99,13
3.903
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
SL
Max
F
Thread dia.
Class 2B
Shell
Size
Metric
Imperial
66
Style: ABBH - ** - ** - SCA - F80
Accessory Type ‘M’
Locking Screened Cable Adaptor With Grommet
How to order:
ABBH - ** - ** - SCA - F80
Shell size
Contact arrangement
7,00
0.276
67,00
2.638
45,00
1.772
35,90
1.413
62,50
2.461
25/16” x 16 UN
40
7,00
0.276
61,00
2.40
38,50
1.516
35,90
1.413
55,50
2.185
21/16” x 16 UNS
36
7,00
0.276
54,00
2.13
33,30
1.311
35,90
1.413
48,50
1.910
17/8” x 16 UN
32
7,00
0.276
48,00
1.89
27,00
1.063
35,90
1.413
41,50
1.634
15/8” x 18 UNEF
28
7,00
0.276
41,00
1.62
24,60
0.969
36,90
1.453
38,50
1.516
13/8” x 18 UNEF
24
7,00
0.276
38,00
1.50
20,80
0.819
36,90
1.453
34,50
1.358
11/4” x 18 UNEF
22
7,00
0.276
35,00
1.38
18,50
0.728
36,90
1.453
32,50
1.280
11/8” x 18 UNEF
20
7,00
0.276
31,00
1.22
14,60
0.575
36,90
1.453
25,50
1.004
1” x 20 UNEF
18
7,00
0.276
28,00
1.11
13,50
0.532
33,90
1.335
25,50
1.004
7/8” x 20 UNEF
16
7,00
0.276
28,00
1.11
13,50
0.532
33,90
1.335
25,50
1.004
7/8” x 20 UNEF
16S
7,00
0.276
25,00
0.99
10,60
0.417
33,90
1.335
22,50
0.886
3/4” x 20 UNEF
14S
7,00
0.276
22,00
0.87
8,60
0.339
31,30
0.812
19,00
0.748
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
M
Max
F
Thread Dia.
Class 2B
Shell
Size
67
Metric
Imperial
Style: ABBH - ** - ** - CCA - F80
Accessory Type ‘R’
Non-Locking Conduit Adaptor, Grommet & Follower
How to order:
ABBH - ** - ** - CCA - F80
Shell size
Contact arrangement
6,34
0.250
63,10
2.484
45,00
1.772
39,85
1.569
11,10
0.437
21/4’’ x 16 UN25/16” x 16 UN
40
7,40
0.291
57,45
2.262
35,70
1.406
39,85
1.569
11,10
0.437
2’’ x 18 UNS21/16” x 16 UNS
36
7,40
0.291
50,80
2.000
32,50
1.280
39,85
1.569
11,10
0.437
13/4’’ x 18 UNS17/8” x 16 UN
32
6,34
0.250
45,60
1.795
30,13
1.186
39,85
1.569
11,10
0.437
17/16’’ x 18 UNEF15/8” x 18 UNEF
28
7,14
0.281
39,10
1.539
25,40
1.000
39,85
1.569
11,10
0.437
17/16’’ x 18 UNEF13/8” x 18 UNEF
24
7,34
0.289
35,03
1.379
19,80
0.780
37,00
1.457
10,10
0.398
13/16’’ x 18 UNEF11/4” x 18 UNEF
22
7,34
0.289
31,85
1.254
19,80
0.780
37,00
1.457
10,10
0.398
13/16’’ x 18 UNEF11/8” x18 UNEF
20
7,34
0.289
28,60
1.126
16,70
0.657
37,00
1.457
10,10
0.398
1” x 20 UNEF1” x 20 UNEF
18
7.00
0.276
25,50
1.004
18,54
0.730
30,60
1.205
10,10
0.398
7/8” x 20 UNEF
7/8” x 20 UNEF
16
7.00
0.276
25,50
1.004
18,54
0.730
29,10
1.146
10,10
0.398
7/8” x 20 UNEF
7/8” x 20 UNEF
16S
7.00
0.276
22,10
0.870
11,30
0.445
29,10
1.146
10,10
0.398
3/4” x 20 UNEF
3/4” x 20 UNEF
14S
7.00
0.276
19,10
0.752
8,80
0.346
29,10
1.146
10,10
0.398
5/8” x 24 UNEF
5/8” x 24 UNEF
10SL
Oa Min
Overlap
Accessory
T
Max
S
Min
N
Max
G
Max
F1
Thread Dia.
Class 2A
F
Thread Dia.
Class 2B
Shell
Size
Metric
Imperial
68
Style: ABBH -** - ** - RC - F80
Accessory Type ‘RC’
Non-Locking Sealed Cable Clamp, Grommet & Follower
ABBH - ** - ** - RC - F80
Shell size
Contact arrangement
How to order:
6.34
0.250
63,10
2.484
25/16” x 16 UN
30,18
1.188
41,25
1.624
66,68
2.625
88,85
3.498
40
7,40
0.291
57,45
2.262
21/16” x 16 UNS
24,61
0.969
35,00
1.378
60,33
2.375
88,85
3.498
36
7,40
0.291
50,80
2.000
17/8” x 16 UN
23,83
0.938
31,75
1.250
57,15
2.250
81,85
3.222
32
6.34
0.250
45,60
1.795
15/8” x 18 UNEF
15,09
0.594
23,80
0.937
44,45
1.750
75,85
2.986
28
7,14
0.281
39,10
1.539
13/8” x 18 UNEF
15,09
0.594
23,80
0.937
44,45
1.750
75,85
2.986
24
7,34
0.289
35,03
1.379
11/4” x 18 UNEF
12,70
0.500
19,00
0.748
39,21
1.562
70,00
2.756
22
7,34
0.289
31,85
1.254
11/8” x 18 UNEF
12,70
0.500
19,00
0.748
39,21
1.562
70,00
2.756
20
7,34
0.289
28,60
1.126
1” x 20 UNEF
9,53
0.375
15,87
0.625
33,32
1.312
70,00
2.756
18
7,00
0.276
25,50
1.004
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
30,18
1.188
60,60
2.386
16
7,00
0.276
25,50
1.004
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
30,18
1.188
59,10
2.327
16S
7,00
0.276
22,10
0.870
3/4” x 20 UNEF
6,35
0.250
11,12
0.438
26,97
1.062
59,10
2.327
14S
7,00
0.276
19,10
0.752
5/8” x 24 UNEF
2,38
0.094
7,93
0.312
23,80
0.937
59,10
2.327
10SL
Oa Min
Overlap
Accessory
T
Max
F
Thread Dia.
Class 2B
C
Max Min
B
A
Max
Shell
Size
69
Metric
Imperial
Style: ABBH - ** - ** - XLA - F80
Accessory Type ‘XLA’
Long Backshell, Grommet, Cable Clamp & Bushing
How to order:
ABBH - ** - ** - XLA - F80
Shell size
Contact arrangement
7,00
0.276
65,00
2.559
67,00
2.638
110,20
4.338
25/16” x 16 UN
34,92
1.375
40
7,00
0.276
58,00
2.283
61,00
2.402
113,43
4.466
21/16” x 16 UNS
31,75
1.250
36
7,00
0.276
51,70
2.035
54,00
2.126
116,60
4.591
17/8” x 16 UN
23,80
0.937
32
7,00
0.276
43,30
1.704
48,00
1.889
119,78
4.716
15/8” x 18 UNEF
19,05
0.750
28
7,00
0.276
43,30
1.704
41,00
1.614
112,78
4.440
13/8” x 18 UNEF
19,05
0.750
24
7,00
0.276
37,50
1.476
38,00
1.496
115,95
4.565
11/4” x 18 UNEF
15,88
0.625
22
7,00
0.276
37,50
1.476
35,00
1.378
115,95
4.565
11/8” x 18 UNEF
15,88
0.625
20
7,00
0.276
33,00
1.299
31,00
1.220
119,13
4.690
1” x 20 UNEF
14,27
0.562
18
7,00
0.276
30,00
1.181
28,00
1.102
122,30
4.815
7/8” x 20 UNEF
11,10
0.437
16
7,00
0.276
30,00
1.181
28,00
1.102
112,00
4.409
7/8” x 20 UNEF
11,10
0.437
16S
7,00
0.276
27,50
1.083
25,00
0.984
115,18
4.535
3/4” x 20 UNEF
7,92
0.312
14S
7,00
0.276
22,70
0.894
22,00
0.866
118,35
4.659
5/8” x 24 UNEF
5,59
0.220
10SL
Oa Min
Overlap
Accessory
T1
Max
T
Max
N
F
Thread Dia.
Class 2B
CShell
Size
Metric
Imperial
70
Style: ABBH - ** - ** - XLC - F80
Accessory Type ‘XLC’
Lon
g
Backshell, Grommet & Sealed Cable Clam
p
How to order:
ABBH - ** - ** - XLC - F80
Shell size
Contact arrangement
7,00
0.276
66,68
2.625
67,00
2.638
114,21
4.496
25/16” x 16 UN
30,18
1.188
41,25
1.624
40
7,00
0.276
60,33
2.375
61,00
2.402
114,21
4.496
21/16” x 16 UNS
24,61
0.969
35,00
1.378
36
7,00
0.276
57,15
2.250
54,00
2.126
107,86
4.246
17/8” x 16 UN
23,83
0.938
31,75
1.250
32
7,00
0.276
44,45
1.750
48,00
1.889
101,51
3.996
15/8” x 18 UNEF
15,09
0.594
23,80
0.937
28
7,00
0.276
44,45
1.750
41,00
1.614
94,51
3.721
13/8” x 18 UNEF
15,09
0.594
23,80
0.937
24
7,00
0.276
39,67
1.562
38,00
1.496
91,33
3.596
11/4” x 18 UNEF
12,70
0.500
19,00
0.748
22
7,00
0.276
39,67
1.562
35,00
1.378
91,33
3.596
11/8” x 18 UNEF
12,70
0.500
19,00
0.748
20
7,00
0.276
33,32
1.312
31,00
1.220
91,33
3.596
1” x 20 UNEF
9,53
0.375
15,87
0.625
18
7,00
0.276
30,18
1.188
28,00
1.102
91,33
3.596
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
16
7,00
0.276
30,18
1.188
28,00
1.102
79,47
3.129
7/8” x 20 UNEF
7,92
0.312
13,48
0.531
16S
7,00
0.276
26,97
1.062
25,00
0.984
79,47
3.129
3/4” x 20 UNEF
6,35
0.250
11,12
0.438
14S
7,00
0.276
23,80
0.937
22,00
0.866
79,47
3.129
5/8” x 24 UNEF
2,38
0.094
7,93
0.312
10SL
Oa Min
Overlap
Accessory
T1
Max
T
Max
N
F
Thread Dia.
Class 2B
C
Max Min
Shell
Size
71
Metric
Imperial
St
y
le: ABBH - ** - ** - SHE - F80
Accessory Type ‘SHE’
Long Back With Grommet
7,0
0.276
25/16” x 16 UN21/4” x 16 UN
44,9
1.768
15,0
0.591
65,8
2.303
67,0
2.638
40
7,0
0.276
21/16” x 16 UNS2” x 18 UNS
36,9
1.453
15,0
0.591
65,8
2.303
61,0
2.402
36
7,0
0.276
17/8” x 16 UN13/4” x 18 UNS
32,0
1.260
15,0
0.591
65,8
2.303
54,0
2.126
32
7,0
0.276
15/8” x 18 UNEF
17/16” x 18
UNEF
25,9
1.020
15,0
0.591
65,8
2.303
48,0
1.890
28
7,0
0.276
13/8” x 18 UNEF
17/16” x 18
UNEF
25,9
1.020
15,0
0.591
58,8
2.303
41,0
1.614
24
7,0
0.276
11/4” x 18 UNEF
13/16” x 18
UNEF
20,9
0.823
15,0
0.591
58,8
2.303
38,0
1.496
22
7,0
0.276
11/8” x 18 UNEF
13/16” x 18
UNEF
20,9
0.823
15,0
0.591
58,8
2.303
35,0
1.378
20
7,0
0.276
1” x 20 UNEF1” x 20 UNEF
16,9
0.666
15,0
0.591
58,8
2.303
31,0
1.220
18
7,0
0.276
7/8” x 20 UNEF
7/8” x 20 UNEF
13,9
0.547
15,0
0.591
58,8
2.303
28,0
1.103
16
7,0
0.276
7/8” x 20 UNEF
7/8” x 20 UNEF
13,9
0.547
15,0
0.591
48,5
1.909
28,0
1.102
16S
7,0
0.276
3/4” x 20 UNEF
3/4” x 20 UNEF
11,7
0.461
15,0
0.591
48,5
1.909
25,0
0.984
14S
7,0
0.276
5/8” x 24 UNEF
5/8” x 24 UNEF
8,5
0.335
15,0
0.591
48,5
1.909
22,0
0.866
10SL
0a
(Min)
Ø F Thd.Ø E Thd.Ø D + 0 / - 0.10
C ± 0.10
B
Ø T
(Max.)
Shell
Size
How to order:
ABBH - ** - ** - SHE - F80
Shell size
Contact arrangement
Metric
Imperial
72
(
DIN 40430
)
PG Threaded Adaptors
PG 4221/4” x 16 UN
51,0
2.008
65,0
2.559
40
ABB-40-PGA-J
PG 362” x 18 UNS
50,0
1.969
57,2
2.252
36
ABB-36-PGA-H
PG 3613/4” x 18 UNS
38,0
1.496
54,0
2.126
32
ABB-32-PGA-H
PG 3617/16” x 18 UNEF
46,0
1.811
54,0
2.126
24 - 28
ABB-24-PGA-H
PG 2917/16” x 18 UNEF
40,0
1.575
43,0
1.693
24 - 28
ABB-24-PGA-G
PG 2117/16” x 18 UNEF
40,0
1.575
43,0
1.693
24 - 28
ABB-24-PGA-F
PG 2913/16” x 18 UNEF
40,0
1.575
43,0
1.693
20 - 22
ABB-20-PGA-G
PG 1613/16” x 18 UNEF
35,0
1.378
37,0
1.457
20 - 22
ABB-20-PGA-E
PG 211” x 20 UNEF
40,0
1.575
34,0
1.339
18
ABB-18-PGA-F
PG 21
7/8” x 20 UNEF
40,0
1.575
34,0
1.339
16S - 16
ABB-16S-PGA-F
PG 16
7/8” x 20 UNEF
35,0
1.378
28,0
1.102
16S - 16
ABB-16S-PGA-E
PG 9
3/4” x 20 UNEF
35,0
1.378
23,5
0.925
14S - 14
ABB-14S-PGA-B
PG 9
5/8” x 24 UNEF
35,0
1.378
20,0
0.787
10SL
ABB-10SL-PGA-
B
Thread DThread CBØ AShell SizePart Number
Note. PG threaded adaptors are used in conjunction with straight and 900
backshell styles ACA, CCA, XL & FT.
For other sizes, please contact the Sales Office.
73
Metric
Imperial
Style: MS 3057A
Cable Clamp
43,66
1.719
41,28
1.625
64,29
2.531
21/4’’ x 16 UN
CMSP3057A40-28A40
30,15
1.187
34,93
1.375
57,15
2.250
2’’ x 18 UNS
CMSP3057A36-24A36
28,58
1.125
31,75
1.250
52,37
2.062
13/4’’ x 18 UNS
CMSP3057A32-20A32
26,97
1.062
23,83
0.938
42,85
1.687
17/16’’ x 18 UNEF
CMSP3057A28-16A28
26,97
1.062
23,83
0.938
42,85
1.687
17/16’’ x 18 UNEF
CMSP3057A24-16A24
24,61
0.969
19,05
0.750
35,71
1.406
13/16’’ x 18 UNEF
CMSP3057A22-12A22
24,61
0.969
19,05
0.750
35,71
1.406
13/16’’ x 18 UNEF
CMSP3057A20-12A20
24,61
0.969
15,88
0.625
30,96
1.219
1” x 20 UNEF
CMSP3057A18-10A18
24,61
0.969
14,30
0.563
28,58
1.125
7/8” x 20 UNEF
CMSP3057A16-8A16
24,61
0.969
14,30
0.563
28,58
1.125
7/8” x 20 UNEF
CMSP3057A16S-8A16S
23,01
0.906
11,13
0.438
25,40
1.000
3/4” x 20 UNEF
CMSP3057A14S-6A14S
21,41
0.843
7,95
0.313
21,41
0.843
5/8” x 24 UNEF
CMSP3057A10SL-4A10SL
D
Max
C
Max
B
Max
A
Thread Dia.
Class 2A
AB Connectors
Part
Number
MS3057
Reference
Shell
Size
74
Metric
Imperial
Style: MS 3057C
Sealed Cable Clamp For Jacketed Cable
66,68
2.625
52,37
2.062
30,18
1.188
41,25
1.624
21/4’’ x 16 UN
CMSP3057C40-28C40
60,33
2.375
52,37
2.062
24,61
0.969
35,00
1.378
2’’ x 18 UNS
CMSP3057C36-24C36
57,15
2.250
46,02
1.812
23,83
0.938
31,75
1.250
13/4’’ x 18 UNS
CMSP3057C32-20C32
44,45
1.750
39,67
1.562
15,09
0.594
23,80
0.937
17/16’’ x 18 UNEF
CMSP3057C28-16C28
44,45
1.750
39,67
1.562
15,09
0.594
23,80
0.937
17/16’’ x 18 UNEF
CMSP3057C24-16C24
39,21
1.562
36,50
1.437
12,70
0.500
19,00
0.748
13/16’’ x 18 UNEF
CMSP3057C22-12C22
39,21
1.562
36,50
1.437
12,70
0.500
19,00
0.748
13/16’’ x 18 UNEF
CMSP3057C20-12C20
33,32
1.312
36,50
1.437
9,53
0.375
15,87
0.625
1” x 20 UNEF
CMSP3057C18-10C18
30,18
1.188
34,93
1.375
7,92
0.312
13,48
0.531
7/8” x 20 UNEF
CMSP3057C16-8C16
30,18
1.188
34,93
1.375
7,92
0.312
13,48
0.531
7/8” x 20 UNEF
CMSP3057C16S-8C16S
26,97
1.062
34,93
1.375
6,35
0.250
11,12
0.438
3/4” x 20 UNEF
CMSP3057C14S-6C14S
23,80
0.937
34,93
1.375
2,38
0.094
7,93
0.312
5/8” x 24 UNEF
CMSP3057C10SL-4C10SL
E
Max
D
Max
C Dia.
Max Min
A
Thread Dia.
Class 2A
AB Connectors
Part
Number
MS3057
Reference
Shell
Size
Metric
Imperial
75
Telescopic Bushing
76
Note
The bushings can fit inside one another
to reduce the cable entry diameter and
improving clamping and sealing.
40,99
1.614
34,92
1.375
44,40
1.748
52,90
2.083
SBMSH5541140
34,62
1.363
31,75
1.250
47,63
1.875
47,88
1.885
SBMSH5541036
31,45
1.238
23,80
0.937
50,80
2.000
44,45
1.750
SBMSH554932
23,50
0.925
19,05
0.750
53,98
2.125
38,23
1.505
SBMSH554828
23,50
0.925
19,05
0.750
53,98
2.125
31,75
1.250
SBMSH554724
18,75
0.738
15,88
0.625
57,15
2.250
28,58
1.125
SBMSH554622
18,75
0.738
15,88
0.625
57,15
2.250
25,40
1.000
SBMSH554520
15,57
0.613
14,27
0.562
60,33
2.375
22,23
0.875
SBMSH554418
13,97
0.550
11,10
0.437
63,50
2.500
19,05
0.750
SBMSH554316
13,97
0.550
11,10
0.437
63,50
2.500
19,05
0.750
SBMSH554316S
10,80
0.425
7,92
0.312
66,68
2.625
15,88
0.625
SBMSH554214S
7,62
0.300
5,59
0.220
69,85
2.750
12,83
0.505
SBMSH554110SL
DCBA
Part
Number
Shell
Size
Metric
Imperial
* Size 49 is available as non-screened version only.
RFI Conductive Screening & Sealing
Non-Screening, Sealing Only
Panel Sealin
g
Gaskets
Front Mounted Receptacle
Part Number:
Non-Screening- SB - ** - RPG
RFI Screening- SB - ** - RPGS
Rear Mounted Receptacle
Part Number:
Non-Screening- SB - ** - FPG
RFI Screening- SB - ** - FPGS
1,25
0.049
7,90
0.311
98,10
3.862
98,10
3.862
110,00
4.331
*49
1,00
0.040
5,10
2.010
65,50
2.580
61,90
2.440
69,90
2.750
40
1,00
0.040
4,78
0.188
59,70
2.350
52,60
2.071
63,50
2.500
36
1,00
0.040
4,78
0.188
53,50
2.106
47,60
1.875
57,20
2.250
32
1,00
0.040
4,12
0.162
46,80
1.843
41,30
1.625
50,80
2.000
28
1,00
0.040
4,12
0.162
41,00
1.614
34,90
1.375
44,50
1.750
24
1,00
0.040
3,43
0.135
37,50
1.476
31,70
1.250
41,30
1.625
22
1,00
0.040
3,43
0.135
34,30
1.350
28,60
1.125
38,10
1.500
20
1,00
0.040
3,43
0.135
30,90
1.217
25,40
1.000
34,90
1.375
18
1,00
0.040
3,43
0.135
27,50
1.083
22,20
0.875
32,50
1.280
16
1,00
0.040
3,43
0.135
27,50
1.083
22,20
0.875
32,50
1.280
16S
1,00
0.040
3,43
0.135
24,70
0.972
19,00
0.750
30,20
1.188
14S
1,00
0.040
3,43
0.135
18,30
0.720
15,88
0.625
25,40
1.000
10SL
T
Nominal
d
Min
B1
Nominal
B
Nominal
A
Min
Shell
size
Metric
Imperial
77
Note. For alternative cord or chain length, please consult the factory.
ABB-**-E-PCA / E-PCAK
St
y
les: ABBE-**-X-PC
A
/
X
-PCA
K
&
X
-PCAJ / X-PCAJ
K
Protective Ca
p
s
Caps for Single Hole
Mounting Receptacle
15,75
0.620
5,50
0.217
4,85
0.191
150,00
6.000
33.90
1.335
29,80
1.173
27,30
1.075
27,00
1.063
65.50
2.579
73,40
2.890
72,10
2.838
40
15,75
0.620
5,50
0.217
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
27,00
1.063
59,60
2.346
67,50
2.658
66,30
2.610
36
15,75
0.620
5,50
0.217
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
27,00
1.063
53,40
2.102
61,30
2.413
60,10
2.366
32
15,75
0.620
4,30
0.169
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
24,00
0.945
46,70
1.838
54,60
2.150
53,40
2.102
28
15,75
0.620
4,30
0.169
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
24,00
0.945
40.90
1.610
48,80
1.921
46,60
1.835
24
15,75
0.620
4,30
0.169
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
24,00
0.945
37,40
1.472
45,30
1.784
43,10
1.697
22
15,85
0.624
4,30
0.169
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
24,00
0.945
34,20
1.346
42,10
1.658
39,90
1.571
20
15,85
0.624
4,30
0.169
4,85
0.191
150,00
6.000
33,90
1.335
29,80
1.173
27,30
1.075
24,00
0.945
30,80
1.213
38,70
1.524
36,50
1.437
18
15,85
0.624
4,30
0.169
4,85
0.191
100,00
4.000
28,40
1.118
24,60
0.969
27,30
1.075
24,00
0.945
27,40
1.079
35,30
1.390
32,40
1.276
16
11,10
0.437
4,30
0.169
4,85
0.191
100,00
4.000
28,40
1.118
24,60
0.969
21,60
0.850
17,50
0.689
27,40
1.079
35,30
1.390
32,40
1.276
16S
11,10
0.437
4,30
0.169
4,85
0.191
100,00
4.000
28,40
1.118
24,60
0.969
21,60
0.850
17,50
0.689
24,60
0.969
32,50
1.280
29,20
1.150
14S
11,10
0.437
4,30
0.169
4,85
0.191
100,00
4.000
28,40
1.118
24,60
0.969
21,60
0.850
17,50
0.689
18,20
0.717
26,10
1.028
22,80
0.898
10SL
Om Min
Overlap
Mated
d2
+0.5, -0
+0.02, -0
d1
Min
L
approx.
See note
F2
Max
F1
Max
E2
Max
E1
Max
D
Max
C
Max
B
Max
Shell
Size
Metric
Imperial
78
Dummy Pin, Socket & Grommet Filler Plug
Individual Wire Seal Grommet
How to order:
ABBH - ** - ** - GAC - F80
Shell size
Contact arrangement
16,00
0.630
14,00
0.551
**0 (500)
11,00
0.433
8.18
0.322
4 (160)
7,20
0.283
4,90
0.193
8 (100)
5,12
0.202
2,44
0.096
12 (25)
3,20
0.126
1,52
0.060
16S/16 (15S/15)
*Wire Insulation
Max O/D
*Wire Insulation
Min O/D
F80 Contact Sizes
AWG (Metric)
Metric
Imperial
White
15,00
0.590
44,70
1.760
15,00
0.590
24,60
0.969
15,60
0.614
12,50
0.500
0 (500)
Black
****
10,20
0.402
12,10
0.476
4 (160)
Violet
7,80
0.307
40,95
1.612
7,80
0.307
22,75
0.896
7,00
0.276
12,10
0.476
8 (100)
Orange
4,80
0.189
37,75
1.486
4,80
0.189
20,40
0.803
3,80
0.150
12,30
0.484
12 (25)
Brown
(KDP/KDS)
3,20
0.126
36,75
1.447
3,20
0.126
20,00
0.787
3,90
0.154
12,30
0.484
***16 (15)
Pink
3,20
0.126
26,85
1.057
3,20
0.126
20,40
0.803
3,90
0.154
12,30
0.484
***16S (15S)
Colour
Code
d2
Max
L2
Max
d1
Max
L1
Max
d
Max
L
Max
Contact Size
AWG (Metric)
Metric
Imperial
* Please contact sales office for further detail.
** For details of grommet reducing bushes to suit 35mm2, 25mm2 &
16mm
2
wire, please contact the sales office.
79
Style: ABCIR - ** - SX / SX - M6
Square Flange Stowage Receptacle
Note.
See page 79 for panel mounting details.
90,00
3.543
8,20
0.323
-
8,50
0.335
110,40
4.346
56,73
2.233
ABCIR-49-SX
15,75
0.620
55,50
2.185
4,20
0.165
M5
4,30
0.169
70,20
2.763
26,80
1.055
ABCIR-40-SX
15,75
0.620
49,20
1.937
4,20
0.165
M5
4,30
0.169
63,80
2.512
26,80
1.055
ABCIR-36-SX
15,75
0.620
44,50
1.752
4,20
0.165
M5
4,30
0.169
57,30
2.256
26,80
1.055
ABCIR-32-SX
15,75
0.620
39,70
1.563
4,20
0.165
M5
3,70
0.146
51,10
2.012
25,20
0.992
ABCIR-28-SX
15,75
0.620
34,90
1.374
4,20
0.165
M4
3.70
0.146
44,80
1.764
25,20
0.992
ABCIR-24-SX
15,75
0.620
31,80
1.252
4,20
0.165
M4
3,20
0.126
41,30
1.626
23,60
0.929
ABCIR-22-SX
15,85
0.624
29,40
1.157
4,20
0.165
M4
3,20
0.126
38,30
1.508
23,60
0.929
ABCIR-20-SX
15,85
0.624
27,00
1.063
4,20
0.165
M4
3,20
0.126
35,30
1.390
23,60
0.929
ABCIR-18-SX
15,85
0.624
24,60
0.969
3,40
0.134
M4
3,20
0.126
32,80
1.291
22,80
0.898
ABCIR-16-SX
11,10
0.437
24,60
0.969
3,40
0.134
M4
3,20
0.126
32,80
1.291
18,00
0.709
ABCIR-16S-SX
11,10
0.437
23,10
0.909
3,40
0.134
M4
3,20
0.126
30,30
1.193
18,00
0.709
ABCIR-14S-SX
11,10
0.437
18,20
0.717
3,00
0.118
M4
3,20
0.126
25,70
1.012
17,60
0.693
ABCIR-10SL-SX
Om min
overlap
mated
XE
Max
d2
Thread
D1
Min
C
Max
B
Max
Part
Number
Metric
Imperial
80
St
y
le: ABB ** NP
(
Metric Thread
)
/ NPA
(
UNC Thread
)
Nut Plates
Square Fange Receptacle
ABB40NPA8 - 32 UNCABB40NPM4 x 0,7
8,00
0.315
38,60
1.520
3,50/5,00
0.138/0.197
68,33
2.690
74,68
2.940
55,58
2.188
40
ABB36NPA8 - 32 UNCABB36NPM4 x 0,7
8,00
0.315
35,43
1.395
3,50/5,00
0.138/0.197
59,10
2.327
63,86
2.514
49,23
1.968
36
ABB32NPA8 - 32 UNCABB32NPM4 x 0,7
8,00
0.315
30,68
1.208
3,50/5,00
0.138/0.197
52,75
2.077
59,10
2.327
44,45
1.750
32
ABB28NPA4 - 40 UNCABB28NPM3 x 0,5
7,50
0.295
29,08
1.145
2,69/4,22
0.106/0.166
46,61
1.835
51,18
2.015
39,67
1.562
28
ABB24NPA4 - 40 UNCABB24NPM3 x 0,5
7,50
0.295
25,90
1.020
2,69/4,22
0.106/0.166
40,00
1.575
44,83
1.765
34,93
1.375
24
ABB22NPA4 - 40 UNCABB22NPM3 x 0,5
6,00
0.236
23,54
0.927
2,69/4,22
0.106/0.166
36,65
1.443
40,84
1.608
31,75
1.250
22
ABB20NPA4 - 40 UNCABB20NPM3 x 0,5
6,00
0.236
22,47
0.885
2,69/4,22
0.106/0.166
33,53
1.320
38,48
1.515
29,36
1.156
20
ABB18NPA4 - 40 UNCABB18NPM3 x 0,5
6,00
0.236
20,21
0.796
2,69/4,22
0.106/0.166
30,48
1.250
34,62
1.363
26,97
1.062
18
ABB16NPA4 - 40 UNCABB16NPM3 x 0,5
6,00
0.236
17,85
0.703
2,69/4,22
0.106/0.166
28,17
1.109
32,26
1.270
24,61
0.969
16
ABB16SNPA4 - 40 UNCABB16SNPM3 x 0,5
6,00
0.236
17,85
0.703
2,69/4,22
0.106/0.166
28,17
1.109
32,26
1.270
24,61
0.969
16S
ABB14SNPA4 - 40 UNCABB14SNPM3 x 0,5
6,00
0.236
16,25
0.640
2,69/4,22
0.106/0.166
24,59
0.968
30,66
1.207
23,01
0.906
14S
ABB10SLNPA4 - 40 UNCABB10SLNPM3 x 0,5
6,00
0.236
11,50
0.453
2,69/4,22
0.106/0.166
17,85
0.702
26,26
1.034
18,26
0.719
10SL
Part
Number
T
Thread
Part
Number
T
Thread
F Dia.
Max
E
Max
D
C Dia.
Max
B
Max
A
Shell
Size
81
Metric
Imperial
* Please consult factory for availability.
*** For Grommet Filler Plugs (KFP), do not add F80 to part number. Colour Blue.
Front Mounting Style: ABCIRH00 Rear Mounting Style: ABCIRH03
ABCIRH04 ABCIRH05 & 07
ABCIRH12A
Panel Mounting Detail
S
q
uare Flan
g
e Rece
p
tacles
Note 1.
When fixed connectors are used with threaded
mounting holes, refer to hole sizes in column d4.
Note 2.
When fixed connectors are used with plugs
having rubber coupling nuts, please consult
factory for panel cut-out dimensions.
90,00
3.543
91,00
3.583
91,00
3.583
140,00
5.512
-
8,50
0.315
49
55,50
2.186
66,4
2.614
59,10
2.327
75,00
2.953
5,50
0.217
4,50
0.177
40
49,20
1.937
59,98
2.361
55,00
2.165
69,00
2.717
5,50
0.217
4,50
0.177
36
44,50
1.752
53,78
2.117
48,50
1.909
62,40
2.475
5,50
0.217
4,50
0.177
32
39,70
1.563
47,08
1.854
42,00
1.654
55,50
2.185
5,50
0.217
3,90
0.154
28
34,90
1.374
41,28
1.625
36,00
1.417
48,70
1.917
4,50
0.177
3,90
0.154
24
31,80
1.252
37,78
1.487
33,00
1.300
45,20
1.780
4,50
0.177
3,40
0.134
22
29,40
1.157
34,58
1.361
30,00
1.181
41,70
1.642
4,50
0.177
3,40
0.134
20
27,00
1.063
31,18
1.228
26,00
1.024
38,30
1.508
4,50
0.177
3,40
0.134
18
24,60
0.969
27,78
1.094
23,00
0.906
34,40
1.354
4,50
0.177
3,40
0.134
16
24,60
0.969
27,78
1.094
23,00
0.906
34,40
1.354
4,50
0.177
3,40
0.134
16S
23,00
0.906
24,98
0.984
20,00
0.780
31,60
1.244
4,50
0.177
3,40
0.134
14S
18,20
0.717
18,58
0.732
17,00
0.670
26,60
1.047
4,50
0.177
3,40
0.134
10SL
XW1WVd4
dia.
d3
dia.
Shell
Size
Metric
Imperial
82
Panel Mounting Detail
Sin
g
le Hole Mountin
g
Rece
p
tacle
Note.
When fixed connectors are used with plugs
having rubber coupling nuts, please consult
factory for panel cut-out dimensions.
68,38
2.692
70,18
2.763
85,25
3.356
40
62,18
2.448
63,83
2.513
77.95
3.069
36
55,78
2.196
57,48
2.263
71,55
2.817
32
49,37
1.944
51,13
2.013
65,25
2.569
28
43,18
1.700
44,78
1.763
58,45
2.301
24
39,88
1.570
41,56
1.636
55,45
2.183
22
36,68
1.444
38,43
1.513
52,05
2.049
20
33,58
1.322
35,23
1.387
48,85
1.923
18
30,78
1.212
32,08
1.263
45,15
1.776
16
30,78
1.212
32,08
1.263
45,15
1.776
16S
27,23
1.072
28,88
1.137
42,05
1.656
14S
20,83
0.820
22,53
0.887
32,55
1.281
10SL
KJ dia.H ctrs.
Shell
Size
83
Metric
Imperial
Socket Contact Guide Pins
Insertion & Extraction Tools
F80 Crimp Contacts
Insertion Tool Extraction Tool
0 (500)
4 (160)
Tool Not
Required
8 (100)
ABB-IT-12
12 (25)
ABB-IT-16
16 (15)
ABB-IT-16
16 (16S)
Insertion Tool
Part
Number
Contact Size
AWG (Metric)
0 (500)
4 (160)
Tool Not
Required
8 (100)
ABB-ET-12
12 (25)
ABB-ET-16
16 (15)
ABB-ET-16
16 (16S)
Extraction Tool
Part
Number
Contact Size
AWG (Metric)
Socket Contact Guide Pin
0 (500)
4 (160)
Guide Pin
Not
Required
8 (100)
ABB-12-SGP
12 (25)
ABB-16-SGP
16 (15)
ABB-16-SGP
16 (16S)
Guide Pin
Part
Number
Socket
Contact Size
AWG (Metric)
84
Note.
For full assembly instructions, see
AB Specification 514.
Contact the sales office for a copy.
Crimp & Tooling Data
F80 Contacts
ABB12SGABBET12ABBIT12Yellow5TH592M3104,0ABB12/40KSKF8012/40 Skt.
-ABBET12ABBIT12Yellow5TH592M3104,0ABB12/40KPKF8012/40 Pin
ABB12SGABBET12ABBIT12Yellow5TH592M3105,53ABB12/10KSKF8012/10 Skt.
-ABBET12ABBIT12Yellow5TH592M3105,53ABB12/10KPKF8012/10 Pin
ABB12SGABBET12ABBIT12Yellow7TH592AF8/WA27F2,50/3,00ABB12KLKF80LIF 12 Skt.
ABB12SGABBET12ABBIT12Yellow7TH592AF8/WA27F2,50/3,00ABB12KSKF8012 Skt.
-ABBET12ABBIT12Yellow7TH592AF8/WA27F2,50/3,00ABB12KPKF8012 Pin
ABB12SGABBET12ABBIT12Yellow5TH592AF8/WA27F1,94/2,08ABB12/14KSKF8012/14 Skt.
-ABBET12ABBIT12Yellow5TH592AF8/WA27F1,94/2,08ABB12/14KPKF8012/14 Pin
ABB12SGABBET12ABBIT12Yellow5TH592AF8/WA27F0,93/1,5ABB12/16KLKF80LIF 12/16 Skt.
ABB12SGABBET12ABBIT12Yellow5TH592AF8/WA27F0,93/1,5ABB12/16KSKF8012/16 Skt.
-ABBET12ABBIT12Yellow5TH592AF8/WA27F0,93/1,5ABB12/16KPKF8012/16 Pin
ABB12SGABBET12ABBIT12Yellow4TH592AF8/WA27F0,75/0,93ABB12/18KSKF8012/18 Skt.
-ABBET12ABBIT12Yellow4TH592AF8/WA27F0,75/0,93ABB12/18KPKF8012/18 Pin
ABB12SGABBET12ABBIT12Yellow3TH592AF8/WA27F0,5/0,75ABB12/20KLKF80LIF 12/20 Skt.
ABB12SGABBET12ABBIT12Yellow3TH592AF8/WA27F0,5/0,75ABB12/20KSKF8012/20 Skt.
-ABBET12ABBIT12Yellow3TH592AF8/WA27F0,5/0,75ABB12/20KPKF8012/20 Pin
ABB16SGABBET16ABBIT16Yellow7TH592AF8/WA27F2,50/3,00ABB16/12KSKF8016/12Skt.
-ABBET16ABBIT16Yellow7TH592AF8/WA27F2,50/3,00ABB16/12KPKF8016/12 Pin
ABB16SGABBET16ABBIT16Red5TH592AF8/WA27F1,94/2,08ABB16/14KSKF8016/14 Skt.
-ABBET16ABBIT16Blue5TH592AF8/WA27F1,94/2,08ABB16/14KPKF8016/14 Pin
ABB16SGABBET16ABBIT16Red5TH592AF8/WA27F0,93/1,5ABB16KLKF80LIF 16 Skt.
ABB16SGABBET16ABBIT16Red5TH592AF8/WA27F0,93/1,5ABB16KSKF8016 Skt.
-ABBET16ABBIT16Blue5TH592AF8/WA27F0,93/1,5ABB16KPKF8016 Pin
ABB16SGABBET16ABBIT16Red4TH592AF8/WA27F0,75/0,93ABB16/18KSKF8016/18 Skt.
-ABBET16ABBIT16Blue4TH592AF8/WA27F0,75/0,93ABB16/18KPKF8016/18 Pin
ABB16SGABBET16ABBIT16Red3TH592AF8/WA27F0,5/0,75ABB16/20KLKF80LIF16/20 Skt.
ABB16SGABBET16ABBIT16Red3TH592AF8/WA27F0,5/0,75ABB16/20KSKF8016/20 Skt.
-ABBET16ABBIT16Blue3TH592AF8/WA27F0,5/0,75ABB16/20KPKF8016/20 Pin
ABB16SGABBET16ABBIT16
Blue
2/3TH592AF8/WA27F0,22/0,34ABB16/22KSKF8016/22 Skt.
-ABBET16ABBIT16Red2/3TH592AF8/WA27F0,22/0,34ABB16/22KPKF8016/22 Pin
ABB16SGABBET16ABBIT16-5TP1249AF8/WA27F0,93/1,5ABB16SKLKF80LIF 16S Skt.
ABB16SGABBET16ABBIT16-5TP1249AF8/WA27F0,93/1,5ABB16SKSKF8016S Skt.
-ABBET16ABBIT16
-
5TP1249AF8/WA27F0,93/1,5ABB16SKPKF8016S Pin
ABB16SGABBET16ABBIT16-5TP1249AF8/WA27F1,94/2,08ABB16S/14KSKf8016S/14 Skt.
-ABBET16ABBIT16-5TP1249AF8/WA27F1,94/2,08ABB16S/14KPKf8016S/14 Pin
ABB16SGABBET16ABBIT16-4TP1249AF8/WA27F0,75/0,93ABB16S/18KSKF8016S/18 Skt.
-ABBET16ABBIT16-4TP1249AF8/WA27F0,75/0,93ABB16S/18KPKF8016S/18 Pin
ABB16SGABBET16ABBIT16-3TP1249AF8/WA27F0,5/0,75ABB16S/20KSKF8016S/20 Skt.
-ABBET16ABBIT16-3TP1249AF8/WA27F0,5/0,75ABB16S/20KPKF8016S/20 Pin
Guide
Pins
Extraction
Tool
Insertion
Tool
Tool Pos’n
If
Applicable
Tool
Setting
Turret/
Locator
Tool
Required
Wire Size
C.S.A.
mm2
Contact
Part Number
Contact
Size &
Type
85
Crimp & Tooling Data cont.
F80 Contacts
-----Die Set MRP0925D55E50,0ABB500KSKF80500 Skt.
-----Die Set MRP0925D55E50,0ABB500KPKF80500 Pin
-----Die SetD55E35,0ABB500/350KSKF8500/350 Skt.
-----Die SetD55E35,0ABB500/350KPKF8500/350 Pin
-----Die SetD55E25,0ABB500/250KSKF8500/250 Skt.
-----Die SetD55E25,0ABB500/250KPKF8500/250 Pin
-----Die Set MRP0924D55E16,0ABB500/160KSKF8500/160 Skt.
-----Die Set MRP0924D55E16,0ABB500/160KPKF8500/160 Pin
-----Die Set 22392ERMA 1960053,0ABB0KSKF800 Skt
-----Die Set 22392ERMA 1960053,0ABB0KPKF800 Pin
-----Die Set MRP0924D55E16,0ABB160KSKF80160 Skt.
-----Die Set MRP0924D55E16,0ABB160KPKF80160 Pin
-----Die Set 22391ERMA 1960022,0ABB4KSKF804 Skt.
-----Die set 22391ERMA 1960022,0ABB4KPKF804 Pin
-----Die SetD55E5,53ABB4/10KSKF804/10 Skt.
-----Die SetD55E5,53ABB4/10KPKF804/10 Pin
-----Die Set MRP0925D55E10,0ABB100KSKF80100 Skt.
-----Die Set MRP0925D55E10,0ABB100KPKF80100 Pin
-----Die SetD55E6,0ABB100/60KSKF80100/60 Skt.
-----Die SetD55E6,0ABB100/60KPKF80100/60 Pin
-----22390ERMA 196009,0ABB8KSKF808 Skt.
-----22390ERMA 196009,0ABB8KPKF808 Pin
-----Die SetD55E5,53ABB8/10KSKF808/10 Skt.
-----Die SetD55E5,53ABB8/10KPKF808/10 Pin
----3Consult FactoryM3102,5ABB8/12KSKF808/12 Skt.
----3Consult FactoryM3102,5ABB8/12KPKF808/12 Pin
-----Die SetD55E4,0ABB8/40KSKF808/40 Skt.
-----Die SetD55E4,0ABB8/40KPKF808/40 Pin
Guide
Pins
Extraction
Tool
Insertion
Tool
Tool Pos’n
If
Applicable
Tool
Setting
Turret/
Locator
Tool
Required
Wire Size
C.S.A.
mm2
Contact
Part Number
Contact
Size
& Type
Note.
For full assembly and wiring instructions for ABCIRH
connectors, see AB Specification 514.
To obtain a copy, please contact the Sales Office.
86
Crimp & Tooling Data
F80 Coax & Twinax Contacts
--HD51-150D55E/D51Screen
--Y946HX4Intermediate
Blue4TH608AF8Inner0.75/1.0ABB4TKSKF80P10014 Twinax Skt.
--HD51-150D55E/D51Screen
--Y946HX4Intermediate
Red4TH608AF8Inner0.75/1.0ABB4TKPKF80P10014 Twinax Pin
--HD51-150D55E/D51Screen
--Y946HX4Intermediate
Blue4TH608AF8Inner0.5/0.6ABB4TKSKF80P14 Twinax Skt
--HD51-150D55E/D51Screen
--Y946HX4Intermediate
Red4TH608AF8Inner0.5/0.6ABB4TKPKF80P14 Twinax Pin
--HD51-150D55E/D51Screen
Blue4TH619AF8Inner1.0ABB4CKSKF80P10024 Coax Skt.
--HD51-150D55E/D51Screen
Red4TH619AF8Inner1.0ABB4CKPKF80P10024 Coax Pin
--31038D55E/D51Screen
Blue4TH619AF8Inner0.5ABB4CKSKF80P10014 Coax Skt
--31038D55E/D51Screen
Red4TH619AF8Inner0.5ABB4CKPKF80P10014 Coax Pin
Tool Position
If Applicable
Tool
Setting
Turret/
Locator
Tool
Required
Contact
Section
Wire Size
C.S.A. mm2
Contact
Part Number
Contact Size
& Type
Note.
For full assembly and wiring instructions for Coax &
Twinax contacts, see AB Specification 525.
To obtain a copy, please contact the Sales Office.
87
Braid Sock - 50mm Diamete
r
U.K. U.S.A
Headquaters Manufacturing & Sales
July 2001 edition
Product Safety Information
AB Connectors Limited
AB Connectors Limited
Abercynon
Mountain Ash
Mid Glamorgan
CF45 4SF
U.K.
Tel. # 44 (0) 1443 740331
Fax. # 44 (0) 1443 741676
Internet - http://www.ttabconnectors.com
E-mail - sales@ttabconnectors.com
A subsidiary of TT electronics plc
AB Connectors Division
Business US 70 East
Smithfield NC 27577
Tel. 919 934 5181
Fax. 919 934 0652
E-mail -
abconnectors@abautomotiveusa.com
A subsidiary of TT electronics plc
Product Safety
The connectors referred to in this catalogue may be
safely used within the special ratings and
environment for which they have been designed.
However, they comprise a complex build of different
materials including metals and plastics which
themselves are plated and cleaned with various
chemical compounds during the assembly
process.
It is important to understand that hazards can occur
if connectors are used:-
1. Outside the specified design criteria and/or
incorrectly integrated into equipment.
2. When damaged in use, assembly, transit or
storage.
3. Incorrectly wired or assembled.
4. Where the quality of installation is below
the standard required to maintain and
uphold good practice.
5. Where good housekeeping is not observed
during use, assembly, transit or storage
and allowing contamination from debris and
fluids etc.
Safety Rules
1. Ensure all conductors & wires are capable
of withstanding the electrical and
environmental conditions of the application.
2. Always use the correct tools for cables,
contacts and connectors.
3. Make circuit resistance checks before
making a circuit live.
4. Always protect line circuits and never
demate a live connector.
5. Never use a damaged connector.
6. Never burn discarded connectors or cable.
7. IF IN DOUBT ASK.
NB: Electrical safety factors are the
responsibility of the user.
Note.
This publication is issued to provide outline information
only and (unless specifically agreed to the
contrary by the company in writing) is not to
form part of any orderor contract or be regarded
as a representation relating to the products or services
concerned.
The company reserves the right and may change or
vary specification without prior written notice.
